forgejo/docs/content/doc/advanced/config-cheat-sheet.en-us.md

1390 lines
106 KiB
Markdown
Raw Normal View History

---
date: "2016-12-26T16:00:00+02:00"
title: "Config Cheat Sheet"
slug: "config-cheat-sheet"
weight: 20
toc: false
draft: false
menu:
sidebar:
parent: "advanced"
name: "Config Cheat Sheet"
weight: 20
identifier: "config-cheat-sheet"
---
# Configuration Cheat Sheet
This is a cheat sheet for the Gitea configuration file. It contains most of the settings
that can be configured as well as their default values.
Any changes to the Gitea configuration file should be made in `custom/conf/app.ini`
or any corresponding location. When installing from a distribution, this will
typically be found at `/etc/gitea/conf/app.ini`.
The defaults provided here are best-effort (not built automatically). They are
accurately recorded in [app.example.ini](https://github.com/go-gitea/gitea/blob/main/custom/conf/app.example.ini)
(s/main/\<tag|release\>). Any string in the format `%(X)s` is a feature powered
by [ini](https://github.com/go-ini/ini/#recursive-values), for reading values recursively.
In the default values below, a value in the form `$XYZ` refers to an environment variable. (However, see `environment-to-ini`.) Values in the form _`XxYyZz`_ refer to values listed as part of the default configuration. These notation forms will not work in your own `app.ini` file and are only listed here as documentation.
Values containing `#` or `;` must be quoted using `` ` `` or `"""`.
**Note:** A full restart is required for Gitea configuration changes to take effect.
{{< toc >}}
## Default Configuration (non-`app.ini` configuration)
These values are environment-dependent but form the basis of a lot of values. They will be
reported as part of the default configuration when running `gitea --help` or on start-up. The order they are emitted there is slightly different but we will list them here in the order they are set-up.
- _`AppPath`_: This is the absolute path of the running gitea binary.
- _`AppWorkPath`_: This refers to "working path" of the `gitea` binary. It is determined by using the first set thing in the following hierarchy:
- The `--work-path` flag passed to the binary
- The environment variable `$GITEA_WORK_DIR`
- A built-in value set at build time (see building from source)
- Otherwise it defaults to the directory of the _`AppPath`_
- If any of the above are relative paths then they are made absolute against the
the directory of the _`AppPath`_
- _`CustomPath`_: This is the base directory for custom templates and other options.
It is determined by using the first set thing in the following hierarchy:
- The `--custom-path` flag passed to the binary
- The environment variable `$GITEA_CUSTOM`
- A built-in value set at build time (see building from source)
- Otherwise it defaults to _`AppWorkPath`_`/custom`
- If any of the above are relative paths then they are made absolute against the
the directory of the _`AppWorkPath`_
- _`CustomConf`_: This is the path to the `app.ini` file.
- The `--config` flag passed to the binary
- A built-in value set at build time (see building from source)
- Otherwise it defaults to _`CustomPath`_`/conf/app.ini`
- If any of the above are relative paths then they are made absolute against the
the directory of the _`CustomPath`_
In addition there is _`StaticRootPath`_ which can be set as a built-in at build time, but will otherwise default to _`AppWorkPath`_
## Overall (`DEFAULT`)
- `APP_NAME`: **Gitea: Git with a cup of tea**: Application name, used in the page title.
- `RUN_USER`: **_current OS username_/`$USER`/`$USERNAME` e.g. git**: The user Gitea will run as.
This should be a dedicated system (non-user) account. Setting this incorrectly will cause Gitea
to not start.
- `RUN_MODE`: **prod**: Application run mode, affects performance and debugging. Either "dev", "prod" or "test".
## Repository (`repository`)
- `ROOT`: **%(APP_DATA_PATH)s/gitea-repositories**: Root path for storing all repository data.
A relative path is interpreted as **_`AppWorkPath`_/%(ROOT)s**.
2019-03-09 21:15:45 +00:00
- `SCRIPT_TYPE`: **bash**: The script type this server supports. Usually this is `bash`,
but some users report that only `sh` is available.
- `DETECTED_CHARSETS_ORDER`: **UTF-8, UTF-16BE, UTF-16LE, UTF-32BE, UTF-32LE, ISO-8859, windows-1252, ISO-8859, windows-1250, ISO-8859, ISO-8859, ISO-8859, windows-1253, ISO-8859, windows-1255, ISO-8859, windows-1251, windows-1256, KOI8-R, ISO-8859, windows-1254, Shift_JIS, GB18030, EUC-JP, EUC-KR, Big5, ISO-2022, ISO-2022, ISO-2022, IBM424_rtl, IBM424_ltr, IBM420_rtl, IBM420_ltr**: Tie-break order of detected charsets - if the detected charsets have equal confidence, charsets earlier in the list will be chosen in preference to those later. Adding `defaults` will place the unnamed charsets at that point.
- `ANSI_CHARSET`: **\<empty\>**: Default ANSI charset to override non-UTF-8 charsets to.
- `FORCE_PRIVATE`: **false**: Force every new repository to be private.
- `DEFAULT_PRIVATE`: **last**: Default private when creating a new repository.
\[last, private, public\]
- `DEFAULT_PUSH_CREATE_PRIVATE`: **true**: Default private when creating a new repository with push-to-create.
- `MAX_CREATION_LIMIT`: **-1**: Global maximum creation limit of repositories per user,
`-1` means no limit.
- `PULL_REQUEST_QUEUE_LENGTH`: **1000**: Length of pull request patch test queue, make it. **DEPRECATED** use `LENGTH` in `[queue.pr_patch_checker]`.
as large as possible. Use caution when editing this value.
- `MIRROR_QUEUE_LENGTH`: **1000**: Patch test queue length, increase if pull request patch
testing starts hanging. **DEPRECATED** use `LENGTH` in `[queue.mirror]`.
- `PREFERRED_LICENSES`: **Apache License 2.0,MIT License**: Preferred Licenses to place at
the top of the list. Name must match file name in options/license or custom/options/license.
- `DISABLE_HTTP_GIT`: **false**: Disable the ability to interact with repositories over the
HTTP protocol.
- `USE_COMPAT_SSH_URI`: **false**: Force ssh:// clone url instead of scp-style uri when
default SSH port is used.
- `ACCESS_CONTROL_ALLOW_ORIGIN`: **\<empty\>**: Value for Access-Control-Allow-Origin header,
default is not to present. **WARNING**: This maybe harmful to you website if you do not
give it a right value.
- `DEFAULT_CLOSE_ISSUES_VIA_COMMITS_IN_ANY_BRANCH`: **false**: Close an issue if a commit on a non default branch marks it as closed.
- `ENABLE_PUSH_CREATE_USER`: **false**: Allow users to push local repositories to Gitea and have them automatically created for a user.
- `ENABLE_PUSH_CREATE_ORG`: **false**: Allow users to push local repositories to Gitea and have them automatically created for an org.
- `DISABLED_REPO_UNITS`: **_empty_**: Comma separated list of globally disabled repo units. Allowed values: \[repo.issues, repo.ext_issues, repo.pulls, repo.wiki, repo.ext_wiki, repo.projects\]
- `DEFAULT_REPO_UNITS`: **repo.code,repo.releases,repo.issues,repo.pulls,repo.wiki,repo.projects,repo.packages**: Comma separated list of default new repo units. Allowed values: \[repo.code, repo.releases, repo.issues, repo.pulls, repo.wiki, repo.projects\]. Note: Code and Releases can currently not be deactivated. If you specify default repo units you should still list them for future compatibility. External wiki and issue tracker can't be enabled by default as it requires additional settings. Disabled repo units will not be added to new repositories regardless if it is in the default list.
- `DEFAULT_FORK_REPO_UNITS`: **repo.code,repo.pulls**: Comma separated list of default forked repo units. The set of allowed values and rules is the same as `DEFAULT_REPO_UNITS`.
- `PREFIX_ARCHIVE_FILES`: **true**: Prefix archive files by placing them in a directory named after the repository.
- `DISABLE_MIGRATIONS`: **false**: Disable migrating feature.
- `DISABLE_STARS`: **false**: Disable stars feature.
- `DEFAULT_BRANCH`: **main**: Default branch name of all repositories.
- `ALLOW_ADOPTION_OF_UNADOPTED_REPOSITORIES`: **false**: Allow non-admin users to adopt unadopted repositories
- `ALLOW_DELETION_OF_UNADOPTED_REPOSITORIES`: **false**: Allow non-admin users to delete unadopted repositories
- `DISABLE_DOWNLOAD_SOURCE_ARCHIVES`: **false**: Don't allow download source archive files from UI
- `ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT`: **true**: Allow fork repositories without maximum number limit
### Repository - Editor (`repository.editor`)
- `LINE_WRAP_EXTENSIONS`: **.txt,.md,.markdown,.mdown,.mkd,**: List of file extensions for which lines should be wrapped in the Monaco editor. Separate extensions with a comma. To line wrap files without an extension, just put a comma
- `PREVIEWABLE_FILE_MODES`: **markdown**: Valid file modes that have a preview API associated with them, such as `api/v1/markdown`. Separate the values by commas. The preview tab in edit mode won't be displayed if the file extension doesn't match.
### Repository - Pull Request (`repository.pull-request`)
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- `WORK_IN_PROGRESS_PREFIXES`: **WIP:,\[WIP\]**: List of prefixes used in Pull Request
title to mark them as Work In Progress. These are matched in a case-insensitive manner.
- `CLOSE_KEYWORDS`: **close**, **closes**, **closed**, **fix**, **fixes**, **fixed**, **resolve**, **resolves**, **resolved**: List of
keywords used in Pull Request comments to automatically close a related issue
- `REOPEN_KEYWORDS`: **reopen**, **reopens**, **reopened**: List of keywords used in Pull Request comments to automatically reopen
a related issue
- `DEFAULT_MERGE_STYLE`: **merge**: Set default merge style for repository creating, valid options: `merge`, `rebase`, `rebase-merge`, `squash`
- `DEFAULT_MERGE_MESSAGE_COMMITS_LIMIT`: **50**: In the default merge message for squash commits include at most this many commits. Set to `-1` to include all commits
- `DEFAULT_MERGE_MESSAGE_SIZE`: **5120**: In the default merge message for squash commits limit the size of the commit messages. Set to `-1` to have no limit. Only used if `POPULATE_SQUASH_COMMENT_WITH_COMMIT_MESSAGES` is `true`.
- `DEFAULT_MERGE_MESSAGE_ALL_AUTHORS`: **false**: In the default merge message for squash commits walk all commits to include all authors in the Co-authored-by otherwise just use those in the limited list
- `DEFAULT_MERGE_MESSAGE_MAX_APPROVERS`: **10**: In default merge messages limit the number of approvers listed as `Reviewed-by:`. Set to `-1` to include all.
- `DEFAULT_MERGE_MESSAGE_OFFICIAL_APPROVERS_ONLY`: **true**: In default merge messages only include approvers who are officially allowed to review.
- `POPULATE_SQUASH_COMMENT_WITH_COMMIT_MESSAGES`: **false**: In default squash-merge messages include the commit message of all commits comprising the pull request.
- `ADD_CO_COMMITTER_TRAILERS`: **true**: Add co-authored-by and co-committed-by trailers to merge commit messages if committer does not match author.
Add setting to disable the git apply step in test patch (#22130) For a long time Gitea has tested PR patches using a git apply --check method, and in fact prior to the introduction of a read-tree assisted three-way merge in #18004, this was the only way of checking patches. Since #18004, the git apply --check method has been a fallback method, only used when the read-tree three-way merge method has detected a conflict. The read-tree assisted three-way merge method is much faster and less resource intensive method of detecting conflicts. #18004 kept the git apply method around because it was thought possible that this fallback might be able to rectify conflicts that the read-tree three-way merge detected. I am not certain if this could ever be the case. Given the uncertainty here and the now relative stability of the read-tree method - this PR makes using this fallback optional and disables it by default. The hope is that users will not notice any significant difference in conflict detection and we will be able to remove the git apply fallback in future, and/or improve the read-tree three-way merge method to catch any conflicts that git apply method might have been able to fix. An additional benefit is that patch checking should be significantly less resource intensive and much quicker. (See https://github.com/go-gitea/gitea/issues/22083\#issuecomment-1347961737) Ref #22083 Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com> Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2022-12-19 11:37:15 +00:00
- `TEST_CONFLICTING_PATCHES_WITH_GIT_APPLY`: **false**: PR patches are tested using a three-way merge method to discover if there are conflicts. If this setting is set to **true**, conflicting patches will be retested using `git apply` - This was the previous behaviour in 1.18 (and earlier) but is somewhat inefficient. Please report if you find that this setting is required.
### Repository - Issue (`repository.issue`)
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- `LOCK_REASONS`: **Too heated,Off-topic,Resolved,Spam**: A list of reasons why a Pull Request or Issue can be locked
### Repository - Upload (`repository.upload`)
- `ENABLED`: **true**: Whether repository file uploads are enabled
- `TEMP_PATH`: **data/tmp/uploads**: Path for uploads (content gets deleted on Gitea restart)
- `ALLOWED_TYPES`: **\<empty\>**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
- `FILE_MAX_SIZE`: **3**: Max size of each file in megabytes.
- `MAX_FILES`: **5**: Max number of files per upload
### Repository - Release (`repository.release`)
- `ALLOWED_TYPES`: **\<empty\>**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
- `DEFAULT_PAGING_NUM`: **10**: The default paging number of releases user interface
2021-09-27 13:00:54 +00:00
- For settings related to file attachments on releases, see the `attachment` section.
Sign merges, CRUD, Wiki and Repository initialisation with gpg key (#7631) This PR fixes #7598 by providing a configurable way of signing commits across the Gitea instance. Per repository configurability and import/generation of trusted secure keys is not provided by this PR - from a security PoV that's probably impossible to do properly. Similarly web-signing, that is asking the user to sign something, is not implemented - this could be done at a later stage however. ## Features - [x] If commit.gpgsign is set in .gitconfig sign commits and files created through repofiles. (merges should already have been signed.) - [x] Verify commits signed with the default gpg as valid - [x] Signer, Committer and Author can all be different - [x] Allow signer to be arbitrarily different - We still require the key to have an activated email on Gitea. A more complete implementation would be to use a keyserver and mark external-or-unactivated with an "unknown" trust level icon. - [x] Add a signing-key.gpg endpoint to get the default gpg pub key if available - Rather than add a fake web-flow user I've added this as an endpoint on /api/v1/signing-key.gpg - [x] Try to match the default key with a user on gitea - this is done at verification time - [x] Make things configurable? - app.ini configuration done - [x] when checking commits are signed need to check if they're actually verifiable too - [x] Add documentation I have decided that adjusting the docker to create a default gpg key is not the correct thing to do and therefore have not implemented this.
2019-10-16 13:42:42 +00:00
### Repository - Signing (`repository.signing`)
- `SIGNING_KEY`: **default**: \[none, KEYID, default \]: Key to sign with.
- `SIGNING_NAME` &amp; `SIGNING_EMAIL`: if a KEYID is provided as the `SIGNING_KEY`, use these as the Name and Email address of the signer. These should match publicized name and email address for the key.
- `INITIAL_COMMIT`: **always**: \[never, pubkey, twofa, always\]: Sign initial commit.
- `never`: Never sign
- `pubkey`: Only sign if the user has a public key
- `twofa`: Only sign if the user is logged in with twofa
- `always`: Always sign
- Options other than `never` and `always` can be combined as a comma separated list.
Add configurable Trust Models (#11712) * Add configurable Trust Models Gitea's default signature verification model differs from GitHub. GitHub uses signatures to verify that the committer is who they say they are - meaning that when GitHub makes a signed commit it must be the committer. The GitHub model prevents re-publishing of commits after revocation of a key and prevents re-signing of other people's commits to create a completely trusted repository signed by one key or a set of trusted keys. The default behaviour of Gitea in contrast is to always display the avatar and information related to a signature. This allows signatures to be decoupled from the committer. That being said, allowing arbitary users to present other peoples commits as theirs is not necessarily desired therefore we have a trust model whereby signatures from collaborators are marked trusted, signatures matching the commit line are marked untrusted and signatures that match a user in the db but not the committer line are marked unmatched. The problem with this model is that this conflicts with Github therefore we need to provide an option to allow users to choose the Github model should they wish to. Signed-off-by: Andrew Thornton <art27@cantab.net> * Adjust locale strings Signed-off-by: Andrew Thornton <art27@cantab.net> * as per @6543 Co-authored-by: 6543 <6543@obermui.de> * Update models/gpg_key.go * Add migration for repository Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: 6543 <6543@obermui.de> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-09-19 16:44:55 +00:00
- `DEFAULT_TRUST_MODEL`: **collaborator**: \[collaborator, committer, collaboratorcommitter\]: The default trust model used for verifying commits.
- `collaborator`: Trust signatures signed by keys of collaborators.
- `committer`: Trust signatures that match committers (This matches GitHub and will force Gitea signed commits to have Gitea as the committer).
- `collaboratorcommitter`: Trust signatures signed by keys of collaborators which match the committer.
Sign merges, CRUD, Wiki and Repository initialisation with gpg key (#7631) This PR fixes #7598 by providing a configurable way of signing commits across the Gitea instance. Per repository configurability and import/generation of trusted secure keys is not provided by this PR - from a security PoV that's probably impossible to do properly. Similarly web-signing, that is asking the user to sign something, is not implemented - this could be done at a later stage however. ## Features - [x] If commit.gpgsign is set in .gitconfig sign commits and files created through repofiles. (merges should already have been signed.) - [x] Verify commits signed with the default gpg as valid - [x] Signer, Committer and Author can all be different - [x] Allow signer to be arbitrarily different - We still require the key to have an activated email on Gitea. A more complete implementation would be to use a keyserver and mark external-or-unactivated with an "unknown" trust level icon. - [x] Add a signing-key.gpg endpoint to get the default gpg pub key if available - Rather than add a fake web-flow user I've added this as an endpoint on /api/v1/signing-key.gpg - [x] Try to match the default key with a user on gitea - this is done at verification time - [x] Make things configurable? - app.ini configuration done - [x] when checking commits are signed need to check if they're actually verifiable too - [x] Add documentation I have decided that adjusting the docker to create a default gpg key is not the correct thing to do and therefore have not implemented this.
2019-10-16 13:42:42 +00:00
- `WIKI`: **never**: \[never, pubkey, twofa, always, parentsigned\]: Sign commits to wiki.
- `CRUD_ACTIONS`: **pubkey, twofa, parentsigned**: \[never, pubkey, twofa, parentsigned, always\]: Sign CRUD actions.
- Options as above, with the addition of:
- `parentsigned`: Only sign if the parent commit is signed.
- `MERGES`: **pubkey, twofa, basesigned, commitssigned**: \[never, pubkey, twofa, approved, basesigned, commitssigned, always\]: Sign merges.
- `approved`: Only sign approved merges to a protected branch.
Sign merges, CRUD, Wiki and Repository initialisation with gpg key (#7631) This PR fixes #7598 by providing a configurable way of signing commits across the Gitea instance. Per repository configurability and import/generation of trusted secure keys is not provided by this PR - from a security PoV that's probably impossible to do properly. Similarly web-signing, that is asking the user to sign something, is not implemented - this could be done at a later stage however. ## Features - [x] If commit.gpgsign is set in .gitconfig sign commits and files created through repofiles. (merges should already have been signed.) - [x] Verify commits signed with the default gpg as valid - [x] Signer, Committer and Author can all be different - [x] Allow signer to be arbitrarily different - We still require the key to have an activated email on Gitea. A more complete implementation would be to use a keyserver and mark external-or-unactivated with an "unknown" trust level icon. - [x] Add a signing-key.gpg endpoint to get the default gpg pub key if available - Rather than add a fake web-flow user I've added this as an endpoint on /api/v1/signing-key.gpg - [x] Try to match the default key with a user on gitea - this is done at verification time - [x] Make things configurable? - app.ini configuration done - [x] when checking commits are signed need to check if they're actually verifiable too - [x] Add documentation I have decided that adjusting the docker to create a default gpg key is not the correct thing to do and therefore have not implemented this.
2019-10-16 13:42:42 +00:00
- `basesigned`: Only sign if the parent commit in the base repo is signed.
- `headsigned`: Only sign if the head commit in the head branch is signed.
- `commitssigned`: Only sign if all the commits in the head branch to the merge point are signed.
## Repository - Local (`repository.local`)
- `LOCAL_COPY_PATH`: **tmp/local-repo**: Path for temporary local repository copies. Defaults to `tmp/local-repo` (content gets deleted on Gitea restart)
## Repository - MIME type mapping (`repository.mimetype_mapping`)
Configuration for set the expected MIME type based on file extensions of downloadable files. Configuration presents in key-value pairs and file extensions starts with leading `.`.
The following configuration set `Content-Type: application/vnd.android.package-archive` header when downloading files with `.apk` file extension.
```ini
.apk=application/vnd.android.package-archive
```
2019-05-13 15:38:53 +00:00
## CORS (`cors`)
- `ENABLED`: **false**: enable cors headers (disabled by default)
- `SCHEME`: **http**: scheme of allowed requests
- `ALLOW_DOMAIN`: **\***: list of requesting domains that are allowed
- `ALLOW_SUBDOMAIN`: **false**: allow subdomains of headers listed above to request
- `METHODS`: **GET,HEAD,POST,PUT,PATCH,DELETE,OPTIONS**: list of methods allowed to request
- `MAX_AGE`: **10m**: max time to cache response
- `ALLOW_CREDENTIALS`: **false**: allow request with credentials
- `HEADERS`: **Content-Type,User-Agent**: additional headers that are permitted in requests
- `X_FRAME_OPTIONS`: **SAMEORIGIN**: Set the `X-Frame-Options` header value.
2019-05-13 15:38:53 +00:00
## UI (`ui`)
- `EXPLORE_PAGING_NUM`: **20**: Number of repositories that are shown in one explore page.
- `ISSUE_PAGING_NUM`: **20**: Number of issues that are shown in one page (for all pages that list issues, milestones, projects).
- `MEMBERS_PAGING_NUM`: **20**: Number of members that are shown in organization members.
- `FEED_MAX_COMMIT_NUM`: **5**: Number of maximum commits shown in one activity feed.
- `FEED_PAGING_NUM`: **20**: Number of items that are displayed in home feed.
2022-06-25 17:06:01 +00:00
- `SITEMAP_PAGING_NUM`: **20**: Number of items that are displayed in a single subsitemap.
- `GRAPH_MAX_COMMIT_NUM`: **100**: Number of maximum commits shown in the commit graph.
- `CODE_COMMENT_LINES`: **4**: Number of line of codes shown for a code comment.
- `DEFAULT_THEME`: **auto**: \[auto, gitea, arc-green\]: Set the default theme for the Gitea install.
- `SHOW_USER_EMAIL`: **true**: Whether the email of the user should be shown in the Explore Users page.
- `THEMES`: **auto,gitea,arc-green**: All available themes. Allow users select personalized themes.
regardless of the value of `DEFAULT_THEME`.
- `THEME_COLOR_META_TAG`: **#6cc644**: Value of `theme-color` meta tag, used by Android >= 5.0. An invalid color like "none" or "disable" will have the default style. More info: https://developers.google.com/web/updates/2014/11/Support-for-theme-color-in-Chrome-39-for-Android
- `MAX_DISPLAY_FILE_SIZE`: **8388608**: Max size of files to be displayed (default is 8MiB)
Support unicode emojis and remove emojify.js (#11032) * Support unicode emojis and remove emojify.js This PR replaces all use of emojify.js and adds unicode emoji support to various areas of gitea. This works in a few ways: First it adds emoji parsing support into gitea itself. This allows us to * Render emojis from valid alias (:smile:) * Detect unicode emojis and let us put them in their own class with proper aria-labels and styling * Easily allow for custom "emoji" * Support all emoji rendering and features without javascript * Uses plain unicode and lets the system render in appropriate emoji font * Doesn't leave us relying on external sources for updates/fixes/features That same list of emoji is also used to create a json file which replaces the part of emojify.js that populates the emoji search tribute. This file is about 35KB with GZIP turned on and I've set it to load after the page renders to not hinder page load time (and this removes loading emojify.js also) For custom "emoji" it uses a pretty simple scheme of just looking for /emojis/img/name.png where name is something a user has put in the "allowed reactions" setting we already have. The gitea reaction that was previously hard coded into a forked copy of emojify.js is included and works as a custom reaction under this method. The emoji data sourced here is from https://github.com/github/gemoji which is the gem library Github uses for their emoji rendering (and a data source for other sites). So we should be able to easily render any emoji and :alias: that Github can, removing any errors from migrated content. They also update it as well, so we can sync when there are new unicode emoji lists released. I've included a slimmed down and slightly modified forked copy of https://github.com/knq/emoji to make up our own emoji module. The code is pretty straight forward and again allows us to have a lot of flexibility in what happens. I had seen a few comments about performance in some of the other threads if we render this ourselves, but there doesn't seem to be any issue here. In a test it can parse, convert, and render 1,000 emojis inside of a large markdown table in about 100ms on my laptop (which is many more emojis than will ever be in any normal issue). This also prevents any flickering and other weirdness from using javascript to render some things while using go for others. Not included here are image fall back URLS. I don't really think they are necessary for anything new being written in 2020. However, managing the emoji ourselves would allow us to add these as a feature later on if it seems necessary. Fixes: https://github.com/go-gitea/gitea/issues/9182 Fixes: https://github.com/go-gitea/gitea/issues/8974 Fixes: https://github.com/go-gitea/gitea/issues/8953 Fixes: https://github.com/go-gitea/gitea/issues/6628 Fixes: https://github.com/go-gitea/gitea/issues/5130 * add new shared function emojiHTML * don't increase emoji size in issue title * Update templates/repo/issue/view_content/add_reaction.tmpl Co-Authored-By: 6543 <6543@obermui.de> * Support for emoji rendering in various templates * Render code and review comments as they should be * Better way to handle mail subjects * insert unicode from tribute selection * Add template helper for plain text when needed * Use existing replace function I forgot about * Don't include emoji greater than Unicode Version 12 Only include emoji and aliases in JSON * Update build/generate-emoji.go * Tweak regex slightly to really match everything including random invisible characters. Run tests for every emoji we have * final updates * code review * code review * hard code gitea custom emoji to match previous behavior * Update .eslintrc Co-Authored-By: silverwind <me@silverwind.io> * disable preempt Co-authored-by: silverwind <me@silverwind.io> Co-authored-by: 6543 <6543@obermui.de> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
2020-04-28 18:05:39 +00:00
- `REACTIONS`: All available reactions users can choose on issues/prs and comments
Values can be emoji alias (:smile:) or a unicode emoji.
For custom reactions, add a tightly cropped square image to public/img/emoji/reaction_name.png
- `CUSTOM_EMOJIS`: **gitea, codeberg, gitlab, git, github, gogs**: Additional Emojis not defined in the utf8 standard.
By default we support Gitea (:gitea:), to add more copy them to public/img/emoji/emoji_name.png and
2021-06-29 14:28:38 +00:00
add it to this config.
- `DEFAULT_SHOW_FULL_NAME`: **false**: Whether the full name of the users should be shown where possible. If the full name isn't set, the username will be used.
- `SEARCH_REPO_DESCRIPTION`: **true**: Whether to search within description at repository search on explore page.
- `USE_SERVICE_WORKER`: **false**: Whether to enable a Service Worker to cache frontend assets.
### UI - Admin (`ui.admin`)
- `USER_PAGING_NUM`: **50**: Number of users that are shown in one page.
- `REPO_PAGING_NUM`: **50**: Number of repos that are shown in one page.
- `NOTICE_PAGING_NUM`: **25**: Number of notices that are shown in one page.
- `ORG_PAGING_NUM`: **50**: Number of organizations that are shown in one page.
### UI - User (`ui.user`)
- `REPO_PAGING_NUM`: **15**: Number of repos that are shown in one page.
### UI - Metadata (`ui.meta`)
- `AUTHOR`: **Gitea - Git with a cup of tea**: Author meta tag of the homepage.
- `DESCRIPTION`: **Gitea (Git with a cup of tea) is a painless self-hosted Git service written in Go**: Description meta tag of the homepage.
- `KEYWORDS`: **go,git,self-hosted,gitea**: Keywords meta tag of the homepage.
Use AJAX for notifications table (#10961) * Use AJAX for notifications table Signed-off-by: Andrew Thornton <art27@cantab.net> * move to separate js Signed-off-by: Andrew Thornton <art27@cantab.net> * placate golangci-lint Signed-off-by: Andrew Thornton <art27@cantab.net> * Add autoupdating notification count Signed-off-by: Andrew Thornton <art27@cantab.net> * Fix wipeall Signed-off-by: Andrew Thornton <art27@cantab.net> * placate tests Signed-off-by: Andrew Thornton <art27@cantab.net> * Try hidden Signed-off-by: Andrew Thornton <art27@cantab.net> * Try hide and hidden Signed-off-by: Andrew Thornton <art27@cantab.net> * More auto-update improvements Only run checker on pages that have a count Change starting checker to 10s with a back-off to 60s if there is no change Signed-off-by: Andrew Thornton <art27@cantab.net> * string comparison! Signed-off-by: Andrew Thornton <art27@cantab.net> * as per @silverwind Signed-off-by: Andrew Thornton <art27@cantab.net> * add configurability as per @6543 Signed-off-by: Andrew Thornton <art27@cantab.net> * Add documentation as per @6543 Signed-off-by: Andrew Thornton <art27@cantab.net> * Use CSRF header not query Signed-off-by: Andrew Thornton <art27@cantab.net> * Further JS improvements Fix @etzelia update notification table request Fix @silverwind comments Co-Authored-By: silverwind <me@silverwind.io> Signed-off-by: Andrew Thornton <art27@cantab.net> * Simplify the notification count fns Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: silverwind <me@silverwind.io>
2020-04-24 03:57:38 +00:00
### UI - Notification (`ui.notification`)
- `MIN_TIMEOUT`: **10s**: These options control how often notification endpoint is polled to update the notification count. On page load the notification count will be checked after `MIN_TIMEOUT`. The timeout will increase to `MAX_TIMEOUT` by `TIMEOUT_STEP` if the notification count is unchanged. Set MIN_TIMEOUT to -1 to turn off.
Use AJAX for notifications table (#10961) * Use AJAX for notifications table Signed-off-by: Andrew Thornton <art27@cantab.net> * move to separate js Signed-off-by: Andrew Thornton <art27@cantab.net> * placate golangci-lint Signed-off-by: Andrew Thornton <art27@cantab.net> * Add autoupdating notification count Signed-off-by: Andrew Thornton <art27@cantab.net> * Fix wipeall Signed-off-by: Andrew Thornton <art27@cantab.net> * placate tests Signed-off-by: Andrew Thornton <art27@cantab.net> * Try hidden Signed-off-by: Andrew Thornton <art27@cantab.net> * Try hide and hidden Signed-off-by: Andrew Thornton <art27@cantab.net> * More auto-update improvements Only run checker on pages that have a count Change starting checker to 10s with a back-off to 60s if there is no change Signed-off-by: Andrew Thornton <art27@cantab.net> * string comparison! Signed-off-by: Andrew Thornton <art27@cantab.net> * as per @silverwind Signed-off-by: Andrew Thornton <art27@cantab.net> * add configurability as per @6543 Signed-off-by: Andrew Thornton <art27@cantab.net> * Add documentation as per @6543 Signed-off-by: Andrew Thornton <art27@cantab.net> * Use CSRF header not query Signed-off-by: Andrew Thornton <art27@cantab.net> * Further JS improvements Fix @etzelia update notification table request Fix @silverwind comments Co-Authored-By: silverwind <me@silverwind.io> Signed-off-by: Andrew Thornton <art27@cantab.net> * Simplify the notification count fns Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: silverwind <me@silverwind.io>
2020-04-24 03:57:38 +00:00
- `MAX_TIMEOUT`: **60s**.
- `TIMEOUT_STEP`: **10s**.
- `EVENT_SOURCE_UPDATE_TIME`: **10s**: This setting determines how often the database is queried to update notification counts. If the browser client supports `EventSource` and `SharedWorker`, a `SharedWorker` will be used in preference to polling notification endpoint. Set to **-1** to disable the `EventSource`.
Use AJAX for notifications table (#10961) * Use AJAX for notifications table Signed-off-by: Andrew Thornton <art27@cantab.net> * move to separate js Signed-off-by: Andrew Thornton <art27@cantab.net> * placate golangci-lint Signed-off-by: Andrew Thornton <art27@cantab.net> * Add autoupdating notification count Signed-off-by: Andrew Thornton <art27@cantab.net> * Fix wipeall Signed-off-by: Andrew Thornton <art27@cantab.net> * placate tests Signed-off-by: Andrew Thornton <art27@cantab.net> * Try hidden Signed-off-by: Andrew Thornton <art27@cantab.net> * Try hide and hidden Signed-off-by: Andrew Thornton <art27@cantab.net> * More auto-update improvements Only run checker on pages that have a count Change starting checker to 10s with a back-off to 60s if there is no change Signed-off-by: Andrew Thornton <art27@cantab.net> * string comparison! Signed-off-by: Andrew Thornton <art27@cantab.net> * as per @silverwind Signed-off-by: Andrew Thornton <art27@cantab.net> * add configurability as per @6543 Signed-off-by: Andrew Thornton <art27@cantab.net> * Add documentation as per @6543 Signed-off-by: Andrew Thornton <art27@cantab.net> * Use CSRF header not query Signed-off-by: Andrew Thornton <art27@cantab.net> * Further JS improvements Fix @etzelia update notification table request Fix @silverwind comments Co-Authored-By: silverwind <me@silverwind.io> Signed-off-by: Andrew Thornton <art27@cantab.net> * Simplify the notification count fns Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: silverwind <me@silverwind.io>
2020-04-24 03:57:38 +00:00
### UI - SVG Images (`ui.svg`)
- `ENABLE_RENDER`: **true**: Whether to render SVG files as images. If SVG rendering is disabled, SVG files are displayed as text and cannot be embedded in markdown files as images.
### UI - CSV Files (`ui.csv`)
- `MAX_FILE_SIZE`: **524288** (512kb): Maximum allowed file size in bytes to render CSV files as table. (Set to 0 for no limit).
## Markdown (`markdown`)
- `ENABLE_HARD_LINE_BREAK_IN_COMMENTS`: **true**: Render soft line breaks as hard line breaks in comments, which
means a single newline character between paragraphs will cause a line break and adding
trailing whitespace to paragraphs is not necessary to force a line break.
- `ENABLE_HARD_LINE_BREAK_IN_DOCUMENTS`: **false**: Render soft line breaks as hard line breaks in documents, which
means a single newline character between paragraphs will cause a line break and adding
trailing whitespace to paragraphs is not necessary to force a line break.
- `CUSTOM_URL_SCHEMES`: Use a comma separated list (ftp,git,svn) to indicate additional
URL hyperlinks to be rendered in Markdown. URLs beginning in http and https are
always displayed
- `ENABLE_MATH`: **true**: Enables detection of `\(...\)`, `\[...\]`, `$...$` and `$$...$$` blocks as math blocks.
## Server (`server`)
- `APP_DATA_PATH`: **_`AppWorkPath`_/data**: This is the default root path for storing data.
- `PROTOCOL`: **http**: \[http, https, fcgi, http+unix, fcgi+unix\]
- `USE_PROXY_PROTOCOL`: **false**: Expect PROXY protocol headers on connections
- `PROXY_PROTOCOL_TLS_BRIDGING`: **false**: When protocol is https, expect PROXY protocol headers after TLS negotiation.
- `PROXY_PROTOCOL_HEADER_TIMEOUT`: **5s**: Timeout to wait for PROXY protocol header (set to 0 to have no timeout)
- `PROXY_PROTOCOL_ACCEPT_UNKNOWN`: **false**: Accept PROXY protocol headers with Unknown type.
- `DOMAIN`: **localhost**: Domain name of this server.
2018-04-04 21:08:55 +00:00
- `ROOT_URL`: **%(PROTOCOL)s://%(DOMAIN)s:%(HTTP\_PORT)s/**:
Overwrite the automatically generated public URL.
This is useful if the internal and the external URL don't match (e.g. in Docker).
- `STATIC_URL_PREFIX`: **\<empty\>**:
Overwrite this option to request static resources from a different URL.
This includes CSS files, images, JS files and web fonts.
Avatar images are dynamic resources and still served by Gitea.
The option can be just a different path, as in `/static`, or another domain, as in `https://cdn.example.com`.
Requests are then made as `%(ROOT_URL)s/static/assets/css/index.css` or `https://cdn.example.com/assets/css/index.css` respectively.
The static files are located in the `public/` directory of the Gitea source repository.
You can proxy the STATIC_URL_PREFIX requests to Gitea server to serve the static
assets, or copy the manually built Gitea assets from `$GITEA_BUILD/public` to
the assets location, eg: `/var/www/assets`, make sure `$STATIC_URL_PREFIX/assets/css/index.css`
points to `/var/www/assets/css/index.css`.
- `HTTP_ADDR`: **0.0.0.0**: HTTP listen address.
- If `PROTOCOL` is set to `fcgi`, Gitea will listen for FastCGI requests on TCP socket
defined by `HTTP_ADDR` and `HTTP_PORT` configuration settings.
- If `PROTOCOL` is set to `http+unix` or `fcgi+unix`, this should be the name of the Unix socket file to use. Relative paths will be made absolute against the _`AppWorkPath`_.
- `HTTP_PORT`: **3000**: HTTP listen port.
- If `PROTOCOL` is set to `fcgi`, Gitea will listen for FastCGI requests on TCP socket
defined by `HTTP_ADDR` and `HTTP_PORT` configuration settings.
- `UNIX_SOCKET_PERMISSION`: **666**: Permissions for the Unix socket.
- `LOCAL_ROOT_URL`: **%(PROTOCOL)s://%(HTTP_ADDR)s:%(HTTP_PORT)s/**: Local
(DMZ) URL for Gitea workers (such as SSH update) accessing web service. In
most cases you do not need to change the default value. Alter it only if
your SSH server node is not the same as HTTP node. Do not set this variable
if `PROTOCOL` is set to `http+unix`.
- `LOCAL_USE_PROXY_PROTOCOL`: **%(USE_PROXY_PROTOCOL)s**: When making local connections pass the PROXY protocol header.
This should be set to false if the local connection will go through the proxy.
- `PER_WRITE_TIMEOUT`: **30s**: Timeout for any write to the connection. (Set to -1 to
disable all timeouts.)
- `PER_WRITE_PER_KB_TIMEOUT`: **10s**: Timeout per Kb written to connections.
- `DISABLE_SSH`: **false**: Disable SSH feature when it's not available.
- `START_SSH_SERVER`: **false**: When enabled, use the built-in SSH server.
- `SSH_SERVER_USE_PROXY_PROTOCOL`: **false**: Expect PROXY protocol header on connections to the built-in SSH Server.
- `BUILTIN_SSH_SERVER_USER`: **%(RUN_USER)s**: Username to use for the built-in SSH Server.
- `SSH_USER`: **%(BUILTIN_SSH_SERVER_USER)s**: SSH username displayed in clone URLs. This is only for people who configure the SSH server themselves; in most cases, you want to leave this blank and modify the `BUILTIN_SSH_SERVER_USER`.
- `SSH_DOMAIN`: **%(DOMAIN)s**: Domain name of this server, used for displayed clone URL.
- `SSH_PORT`: **22**: SSH port displayed in clone URL.
- `SSH_LISTEN_HOST`: **0.0.0.0**: Listen address for the built-in SSH server.
- `SSH_LISTEN_PORT`: **%(SSH\_PORT)s**: Port for the built-in SSH server.
- `SSH_ROOT_PATH`: **~/.ssh**: Root path of SSH directory.
- `SSH_CREATE_AUTHORIZED_KEYS_FILE`: **true**: Gitea will create a authorized_keys file by default when it is not using the internal ssh server. If you intend to use the AuthorizedKeysCommand functionality then you should turn this off.
- `SSH_AUTHORIZED_KEYS_BACKUP`: **true**: Enable SSH Authorized Key Backup when rewriting all keys, default is true.
Add ssh certificate support (#12281) * Add ssh certificate support * Add ssh certificate support to builtin ssh * Write trusted-user-ca-keys.pem based on configuration * Update app.example.ini * Update templates/user/settings/keys_principal.tmpl Co-authored-by: silverwind <me@silverwind.io> * Remove unused locale string * Update options/locale/locale_en-US.ini Co-authored-by: silverwind <me@silverwind.io> * Update options/locale/locale_en-US.ini Co-authored-by: silverwind <me@silverwind.io> * Update models/ssh_key.go Co-authored-by: silverwind <me@silverwind.io> * Add missing creation of SSH.Rootpath * Update cheatsheet, example and locale strings * Update models/ssh_key.go Co-authored-by: zeripath <art27@cantab.net> * Update models/ssh_key.go Co-authored-by: zeripath <art27@cantab.net> * Update models/ssh_key.go Co-authored-by: zeripath <art27@cantab.net> * Update models/ssh_key.go Co-authored-by: zeripath <art27@cantab.net> * Update models/ssh_key.go * Optimizations based on feedback * Validate CA keys for external sshd * Add filename option and change default filename Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty. Add some more documentation. * Remove unneeded principalkey functions * Add blank line * Apply suggestions from code review Co-authored-by: zeripath <art27@cantab.net> * Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default email,username this means that users only can add the principals that match their email or username. To allow anything the admin need to set the option anything. This allows for a safe default in gitea which protects against malicious users using other user's prinicipals. (before that user could set it). This commit also has some small other fixes from the last code review. * Rewrite principal keys file on user deletion * Use correct rewrite method * Set correct AuthorizedPrincipalsBackup default setting * Rewrite principalsfile when adding principals * Add update authorized_principals option to admin dashboard * Handle non-primary emails Signed-off-by: Andrew Thornton <art27@cantab.net> * Add the command actually to the dashboard template * Update models/ssh_key.go Co-authored-by: silverwind <me@silverwind.io> * By default do not show principal options unless there are CA keys set or they are explicitly set Signed-off-by: Andrew Thornton <art27@cantab.net> * allow settings when enabled * Fix typos in TrustedUserCAKeys path * Allow every CASignatureAlgorithms algorithm As this depends on the content of TrustedUserCAKeys we should allow all signature algorithms as admins can choose the specific algorithm on their signing CA * Update models/ssh_key.go Co-authored-by: Lauris BH <lauris@nix.lv> * Fix linting issue Co-authored-by: silverwind <me@silverwind.io> Co-authored-by: zeripath <art27@cantab.net> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: techknowlogick <matti@mdranta.net> Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-10-11 00:38:09 +00:00
- `SSH_TRUSTED_USER_CA_KEYS`: **\<empty\>**: Specifies the public keys of certificate authorities that are trusted to sign user certificates for authentication. Multiple keys should be comma separated. E.g.`ssh-<algorithm> <key>` or `ssh-<algorithm> <key1>, ssh-<algorithm> <key2>`. For more information see `TrustedUserCAKeys` in the sshd config man pages. When empty no file will be created and `SSH_AUTHORIZED_PRINCIPALS_ALLOW` will default to `off`.
- `SSH_TRUSTED_USER_CA_KEYS_FILENAME`: **`RUN_USER`/.ssh/gitea-trusted-user-ca-keys.pem**: Absolute path of the `TrustedUserCaKeys` file Gitea will manage. If you're running your own ssh server and you want to use the Gitea managed file you'll also need to modify your sshd_config to point to this file. The official docker image will automatically work without further configuration.
Add ssh certificate support (#12281) * Add ssh certificate support * Add ssh certificate support to builtin ssh * Write trusted-user-ca-keys.pem based on configuration * Update app.example.ini * Update templates/user/settings/keys_principal.tmpl Co-authored-by: silverwind <me@silverwind.io> * Remove unused locale string * Update options/locale/locale_en-US.ini Co-authored-by: silverwind <me@silverwind.io> * Update options/locale/locale_en-US.ini Co-authored-by: silverwind <me@silverwind.io> * Update models/ssh_key.go Co-authored-by: silverwind <me@silverwind.io> * Add missing creation of SSH.Rootpath * Update cheatsheet, example and locale strings * Update models/ssh_key.go Co-authored-by: zeripath <art27@cantab.net> * Update models/ssh_key.go Co-authored-by: zeripath <art27@cantab.net> * Update models/ssh_key.go Co-authored-by: zeripath <art27@cantab.net> * Update models/ssh_key.go Co-authored-by: zeripath <art27@cantab.net> * Update models/ssh_key.go * Optimizations based on feedback * Validate CA keys for external sshd * Add filename option and change default filename Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty. Add some more documentation. * Remove unneeded principalkey functions * Add blank line * Apply suggestions from code review Co-authored-by: zeripath <art27@cantab.net> * Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default email,username this means that users only can add the principals that match their email or username. To allow anything the admin need to set the option anything. This allows for a safe default in gitea which protects against malicious users using other user's prinicipals. (before that user could set it). This commit also has some small other fixes from the last code review. * Rewrite principal keys file on user deletion * Use correct rewrite method * Set correct AuthorizedPrincipalsBackup default setting * Rewrite principalsfile when adding principals * Add update authorized_principals option to admin dashboard * Handle non-primary emails Signed-off-by: Andrew Thornton <art27@cantab.net> * Add the command actually to the dashboard template * Update models/ssh_key.go Co-authored-by: silverwind <me@silverwind.io> * By default do not show principal options unless there are CA keys set or they are explicitly set Signed-off-by: Andrew Thornton <art27@cantab.net> * allow settings when enabled * Fix typos in TrustedUserCAKeys path * Allow every CASignatureAlgorithms algorithm As this depends on the content of TrustedUserCAKeys we should allow all signature algorithms as admins can choose the specific algorithm on their signing CA * Update models/ssh_key.go Co-authored-by: Lauris BH <lauris@nix.lv> * Fix linting issue Co-authored-by: silverwind <me@silverwind.io> Co-authored-by: zeripath <art27@cantab.net> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: techknowlogick <matti@mdranta.net> Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-10-11 00:38:09 +00:00
- `SSH_AUTHORIZED_PRINCIPALS_ALLOW`: **off** or **username, email**: \[off, username, email, anything\]: Specify the principals values that users are allowed to use as principal. When set to `anything` no checks are done on the principal string. When set to `off` authorized principal are not allowed to be set.
- `SSH_CREATE_AUTHORIZED_PRINCIPALS_FILE`: **false/true**: Gitea will create a authorized_principals file by default when it is not using the internal ssh server and `SSH_AUTHORIZED_PRINCIPALS_ALLOW` is not `off`.
- `SSH_AUTHORIZED_PRINCIPALS_BACKUP`: **false/true**: Enable SSH Authorized Principals Backup when rewriting all keys, default is true if `SSH_AUTHORIZED_PRINCIPALS_ALLOW` is not `off`.
- `SSH_AUTHORIZED_KEYS_COMMAND_TEMPLATE`: **{{.AppPath}} --config={{.CustomConf}} serv key-{{.Key.ID}}**: Set the template for the command to passed on authorized keys. Possible keys are: AppPath, AppWorkPath, CustomConf, CustomPath, Key - where Key is a `models/asymkey.PublicKey` and the others are strings which are shellquoted.
- `SSH_SERVER_CIPHERS`: **chacha20-poly1305@openssh.com, aes128-ctr, aes192-ctr, aes256-ctr, aes128-gcm@openssh.com, aes256-gcm@openssh.com**: For the built-in SSH server, choose the ciphers to support for SSH connections, for system SSH this setting has no effect.
- `SSH_SERVER_KEY_EXCHANGES`: **curve25519-sha256, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, diffie-hellman-group14-sha256, diffie-hellman-group14-sha1**: For the built-in SSH server, choose the key exchange algorithms to support for SSH connections, for system SSH this setting has no effect.
- `SSH_SERVER_MACS`: **hmac-sha2-256-etm@openssh.com, hmac-sha2-256, hmac-sha1**: For the built-in SSH server, choose the MACs to support for SSH connections, for system SSH this setting has no effect
- `SSH_SERVER_HOST_KEYS`: **ssh/gitea.rsa, ssh/gogs.rsa**: For the built-in SSH server, choose the keypairs to offer as the host key. The private key should be at `SSH_SERVER_HOST_KEY` and the public `SSH_SERVER_HOST_KEY.pub`. Relative paths are made absolute relative to the `APP_DATA_PATH`. If no key exists a 4096 bit RSA key will be created for you.
- `SSH_KEY_TEST_PATH`: **/tmp**: Directory to create temporary files in when testing public keys using ssh-keygen, default is the system temporary directory.
- `SSH_KEYGEN_PATH`: **ssh-keygen**: Path to ssh-keygen, default is 'ssh-keygen' which means the shell is responsible for finding out which one to call.
- `SSH_EXPOSE_ANONYMOUS`: **false**: Enable exposure of SSH clone URL to anonymous visitors, default is false.
- `SSH_PER_WRITE_TIMEOUT`: **30s**: Timeout for any write to the SSH connections. (Set to
-1 to disable all timeouts.)
- `SSH_PER_WRITE_PER_KB_TIMEOUT`: **10s**: Timeout per Kb written to SSH connections.
- `MINIMUM_KEY_SIZE_CHECK`: **true**: Indicate whether to check minimum key size with corresponding type.
- `OFFLINE_MODE`: **false**: Disables use of CDN for static files and Gravatar for profile pictures.
2022-08-10 17:37:15 +00:00
- `CERT_FILE`: **https/cert.pem**: Cert file path used for HTTPS. When chaining, the server certificate must come first, then intermediate CA certificates (if any). This is ignored if `ENABLE_ACME=true`. Paths are relative to `CUSTOM_PATH`.
- `KEY_FILE`: **https/key.pem**: Key file path used for HTTPS. This is ignored if `ENABLE_ACME=true`. Paths are relative to `CUSTOM_PATH`.
- `STATIC_ROOT_PATH`: **_`StaticRootPath`_**: Upper level of template and static files path.
- `APP_DATA_PATH`: **data** (**/data/gitea** on docker): Default path for application data. Relative paths will be made absolute against _`AppWorkPath`_.
- `STATIC_CACHE_TIME`: **6h**: Web browser cache time for static resources on `custom/`, `public/` and all uploaded avatars. Note that this cache is disabled when `RUN_MODE` is "dev".
- `ENABLE_GZIP`: **false**: Enable gzip compression for runtime-generated content, static resources excluded.
2022-07-23 17:33:55 +00:00
- `ENABLE_PPROF`: **false**: Application profiling (memory and cpu). For "web" command it listens on `localhost:6060`. For "serv" command it dumps to disk at `PPROF_DATA_PATH` as `(cpuprofile|memprofile)_<username>_<temporary id>`
- `PPROF_DATA_PATH`: **_`AppWorkPath`_/data/tmp/pprof**: `PPROF_DATA_PATH`, use an absolute path when you start Gitea as service
2022-04-05 17:30:07 +00:00
- `LANDING_PAGE`: **home**: Landing page for unauthenticated users \[home, explore, organizations, login, **custom**\]. Where custom would instead be any URL such as "/org/repo" or even `https://anotherwebsite.com`
- `LFS_START_SERVER`: **false**: Enables Git LFS support.
- `LFS_CONTENT_PATH`: **%(APP_DATA_PATH)s/lfs**: Default LFS content path. (if it is on local storage.) **DEPRECATED** use settings in `[lfs]`.
- `LFS_JWT_SECRET`: **\<empty\>**: LFS authentication secret, change this a unique string.
- `LFS_HTTP_AUTH_EXPIRY`: **20m**: LFS authentication validity period in time.Duration, pushes taking longer than this may fail.
- `LFS_MAX_FILE_SIZE`: **0**: Maximum allowed LFS file size in bytes (Set to 0 for no limit).
- `LFS_LOCKS_PAGING_NUM`: **50**: Maximum number of LFS Locks returned per page.
- `REDIRECT_OTHER_PORT`: **false**: If true and `PROTOCOL` is https, allows redirecting http requests on `PORT_TO_REDIRECT` to the https port Gitea listens on.
- `REDIRECTOR_USE_PROXY_PROTOCOL`: **%(USE_PROXY_PROTOCOL)s**: expect PROXY protocol header on connections to https redirector.
- `PORT_TO_REDIRECT`: **80**: Port for the http redirection service to listen on. Used when `REDIRECT_OTHER_PORT` is true.
- `SSL_MIN_VERSION`: **TLSv1.2**: Set the minimum version of ssl support.
- `SSL_MAX_VERSION`: **\<empty\>**: Set the maximum version of ssl support.
2022-01-09 11:53:03 +00:00
- `SSL_CURVE_PREFERENCES`: **X25519,P256**: Set the preferred curves,
- `SSL_CIPHER_SUITES`: **ecdhe_ecdsa_with_aes_256_gcm_sha384,ecdhe_rsa_with_aes_256_gcm_sha384,ecdhe_ecdsa_with_aes_128_gcm_sha256,ecdhe_rsa_with_aes_128_gcm_sha256,ecdhe_ecdsa_with_chacha20_poly1305,ecdhe_rsa_with_chacha20_poly1305**: Set the preferred cipher suites.
- If there is no hardware support for AES suites, by default the ChaCha suites will be preferred over the AES suites.
- supported suites as of Go 1.18 are:
- TLS 1.0 - 1.2 cipher suites
- "rsa_with_rc4_128_sha"
- "rsa_with_3des_ede_cbc_sha"
- "rsa_with_aes_128_cbc_sha"
- "rsa_with_aes_256_cbc_sha"
- "rsa_with_aes_128_cbc_sha256"
- "rsa_with_aes_128_gcm_sha256"
- "rsa_with_aes_256_gcm_sha384"
- "ecdhe_ecdsa_with_rc4_128_sha"
- "ecdhe_ecdsa_with_aes_128_cbc_sha"
- "ecdhe_ecdsa_with_aes_256_cbc_sha"
- "ecdhe_rsa_with_rc4_128_sha"
- "ecdhe_rsa_with_3des_ede_cbc_sha"
- "ecdhe_rsa_with_aes_128_cbc_sha"
- "ecdhe_rsa_with_aes_256_cbc_sha"
- "ecdhe_ecdsa_with_aes_128_cbc_sha256"
- "ecdhe_rsa_with_aes_128_cbc_sha256"
- "ecdhe_rsa_with_aes_128_gcm_sha256"
- "ecdhe_ecdsa_with_aes_128_gcm_sha256"
- "ecdhe_rsa_with_aes_256_gcm_sha384"
- "ecdhe_ecdsa_with_aes_256_gcm_sha384"
- "ecdhe_rsa_with_chacha20_poly1305_sha256"
- "ecdhe_ecdsa_with_chacha20_poly1305_sha256"
- TLS 1.3 cipher suites
- "aes_128_gcm_sha256"
- "aes_256_gcm_sha384"
- "chacha20_poly1305_sha256"
- Aliased names
- "ecdhe_rsa_with_chacha20_poly1305" is an alias for "ecdhe_rsa_with_chacha20_poly1305_sha256"
- "ecdhe_ecdsa_with_chacha20_poly1305" is alias for "ecdhe_ecdsa_with_chacha20_poly1305_sha256"
- `ENABLE_ACME`: **false**: Flag to enable automatic certificate management via an ACME capable Certificate Authority (CA) server (default: Lets Encrypt). If enabled, `CERT_FILE` and `KEY_FILE` are ignored, and the CA must resolve `DOMAIN` to this gitea server. Ensure that DNS records are set and either port `80` or port `443` are accessible by the CA server (the public internet by default), and redirected to the appropriate ports `PORT_TO_REDIRECT` or `HTTP_PORT` respectively.
- `ACME_URL`: **\<empty\>**: The CA's ACME directory URL, e.g. for a self-hosted [smallstep CA server](https://github.com/smallstep/certificates), it can look like `https://ca.example.com/acme/acme/directory`. If left empty, it defaults to using Let's Encerypt's production CA (check `LETSENCRYPT_ACCEPTTOS` as well).
- `ACME_ACCEPTTOS`: **false**: This is an explicit check that you accept the terms of service of the ACME provider. The default is Lets Encrypt [terms of service](https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf).
- `ACME_DIRECTORY`: **https**: Directory that the certificate manager will use to cache information such as certs and private keys.
- `ACME_EMAIL`: **\<empty\>**: Email used for the ACME registration. Usually it is to notify about problems with issued certificates.
- `ACME_CA_ROOT`: **\<empty\>**: The CA's root certificate. If left empty, it defaults to using the system's trust chain.
- `ALLOW_GRACEFUL_RESTARTS`: **true**: Perform a graceful restart on SIGHUP
- `GRACEFUL_HAMMER_TIME`: **60s**: After a restart the parent process will stop accepting new connections and will allow requests to finish before stopping. Shutdown will be forced if it takes longer than this time.
- `STARTUP_TIMEOUT`: **0**: Shutsdown the server if startup takes longer than the provided time. On Windows setting this sends a waithint to the SVC host to tell the SVC host startup may take some time. Please note startup is determined by the opening of the listeners - HTTP/HTTPS/SSH. Indexers may take longer to startup and can have their own timeouts.
## Database (`database`)
- `DB_TYPE`: **mysql**: The database type in use \[mysql, postgres, mssql, sqlite3\].
- `HOST`: **127.0.0.1:3306**: Database host address and port or absolute path for unix socket \[mysql, postgres\] (ex: /var/run/mysqld/mysqld.sock).
- `NAME`: **gitea**: Database name.
- `USER`: **root**: Database username.
- `PASSWD`: **\<empty\>**: Database user password. Use \`your password\` or """your password""" for quoting if you use special characters in the password.
- `SCHEMA`: **\<empty\>**: For PostgreSQL only, schema to use if different from "public". The schema must exist beforehand,
the user must have creation privileges on it, and the user search path must be set to the look into the schema first
(e.g. `ALTER USER user SET SEARCH_PATH = schema_name,"$user",public;`).
- `SSL_MODE`: **disable**: SSL/TLS encryption mode for connecting to the database. This option is only applied for PostgreSQL and MySQL.
- Valid values for MySQL:
- `true`: Enable TLS with verification of the database server certificate against its root certificate. When selecting this option make sure that the root certificate required to validate the database server certificate (e.g. the CA certificate) is on the system certificate store of both the database and Gitea servers. See your system documentation for instructions on how to add a CA certificate to the certificate store.
- `false`: Disable TLS.
- `disable`: Alias for `false`, for compatibility with PostgreSQL.
- `skip-verify`: Enable TLS without database server certificate verification. Use this option if you have self-signed or invalid certificate on the database server.
- `prefer`: Enable TLS with fallback to non-TLS connection.
- Valid values for PostgreSQL:
- `disable`: Disable TLS.
- `require`: Enable TLS without any verifications.
- `verify-ca`: Enable TLS with verification of the database server certificate against its root certificate.
- `verify-full`: Enable TLS and verify the database server name matches the given certificate in either the `Common Name` or `Subject Alternative Name` fields.
- `SQLITE_TIMEOUT`: **500**: Query timeout for SQLite3 only.
- `SQLITE_JOURNAL_MODE`: **""**: Change journal mode for SQlite3. Can be used to enable [WAL mode](https://www.sqlite.org/wal.html) when high load causes write congestion. See [SQlite3 docs](https://www.sqlite.org/pragma.html#pragma_journal_mode) for possible values. Defaults to the default for the database file, often DELETE.
- `ITERATE_BUFFER_SIZE`: **50**: Internal buffer size for iterating.
- `CHARSET`: **utf8mb4**: For MySQL only, either "utf8" or "utf8mb4". NOTICE: for "utf8mb4" you must use MySQL InnoDB > 5.6. Gitea is unable to check this.
- `PATH`: **data/gitea.db**: For SQLite3 only, the database file path.
- `LOG_SQL`: **true**: Log the executed SQL.
2019-01-19 21:17:08 +00:00
- `DB_RETRIES`: **10**: How many ORM init / DB connect attempts allowed.
- `DB_RETRY_BACKOFF`: **3s**: time.Duration to wait before trying another ORM init / DB connect attempt, if failure occurred.
- `MAX_OPEN_CONNS` **0**: Database maximum open connections - default is 0, meaning there is no limit.
- `MAX_IDLE_CONNS` **2**: Max idle database connections on connection pool, default is 2 - this will be capped to `MAX_OPEN_CONNS`.
- `CONN_MAX_LIFETIME` **0 or 3s**: Sets the maximum amount of time a DB connection may be reused - default is 0, meaning there is no limit (except on MySQL where it is 3s - see #6804 & #7071).
- `AUTO_MIGRATION` **true**: Whether execute database models migrations automatically.
Please see #8540 & #8273 for further discussion of the appropriate values for `MAX_OPEN_CONNS`, `MAX_IDLE_CONNS` & `CONN_MAX_LIFETIME` and their
relation to port exhaustion.
## Indexer (`indexer`)
- `ISSUE_INDEXER_TYPE`: **bleve**: Issue indexer type, currently supported: `bleve`, `db` or `elasticsearch`.
- `ISSUE_INDEXER_CONN_STR`: ****: Issue indexer connection string, available when ISSUE_INDEXER_TYPE is elasticsearch. i.e. http://elastic:changeme@localhost:9200
- `ISSUE_INDEXER_NAME`: **gitea_issues**: Issue indexer name, available when ISSUE_INDEXER_TYPE is elasticsearch
- `ISSUE_INDEXER_PATH`: **indexers/issues.bleve**: Index file used for issue search; available when ISSUE_INDEXER_TYPE is bleve and elasticsearch. Relative paths will be made absolute against _`AppWorkPath`_.
Graceful Queues: Issue Indexing and Tasks (#9363) * Queue: Add generic graceful queues with settings * Queue & Setting: Add worker pool implementation * Queue: Add worker settings * Queue: Make resizing worker pools * Queue: Add name variable to queues * Queue: Add monitoring * Queue: Improve logging * Issues: Gracefulise the issues indexer Remove the old now unused specific queues * Task: Move to generic queue and gracefulise * Issues: Standardise the issues indexer queue settings * Fix test * Queue: Allow Redis to connect to unix * Prevent deadlock during early shutdown of issue indexer * Add MaxWorker settings to queues * Merge branch 'master' into graceful-queues * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_disk.go * Update modules/queue/queue_disk_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Rename queue.Description to queue.ManagedQueue as per @guillep2k * Cancel pool workers when removed * Remove dependency on queue from setting * Update modules/queue/queue_redis.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * As per @guillep2k add mutex locks on shutdown/terminate * move unlocking out of setInternal * Add warning if number of workers < 0 * Small changes as per @guillep2k * No redis host specified not found * Clean up documentation for queues * Update docs/content/doc/advanced/config-cheat-sheet.en-us.md * Update modules/indexer/issues/indexer_test.go * Ensure that persistable channel queue is added to manager * Rename QUEUE_NAME REDIS_QUEUE_NAME * Revert "Rename QUEUE_NAME REDIS_QUEUE_NAME" This reverts commit 1f83b4fc9b9dabda186257b38c265fe7012f90df. Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: techknowlogick <matti@mdranta.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-01-07 11:23:09 +00:00
- The next 4 configuration values are deprecated and should be set in `queue.issue_indexer` however are kept for backwards compatibility:
- `ISSUE_INDEXER_QUEUE_TYPE`: **levelqueue**: Issue indexer queue, currently supports:`channel`, `levelqueue`, `redis`. **DEPRECATED** use settings in `[queue.issue_indexer]`.
- `ISSUE_INDEXER_QUEUE_DIR`: **queues/common**: When `ISSUE_INDEXER_QUEUE_TYPE` is `levelqueue`, this will be the path where the queue will be saved. **DEPRECATED** use settings in `[queue.issue_indexer]`. Relative paths will be made absolute against `%(APP_DATA_PATH)s`.
- `ISSUE_INDEXER_QUEUE_CONN_STR`: **addrs=127.0.0.1:6379 db=0**: When `ISSUE_INDEXER_QUEUE_TYPE` is `redis`, this will store the redis connection string. When `ISSUE_INDEXER_QUEUE_TYPE` is `levelqueue`, this is a directory or additional options of the form `leveldb://path/to/db?option=value&....`, and overrides `ISSUE_INDEXER_QUEUE_DIR`. **DEPRECATED** use settings in `[queue.issue_indexer]`.
- `ISSUE_INDEXER_QUEUE_BATCH_NUMBER`: **20**: Batch queue number. **DEPRECATED** use settings in `[queue.issue_indexer]`.
- `REPO_INDEXER_ENABLED`: **false**: Enables code search (uses a lot of disk space, about 6 times more than the repository size).
- `REPO_INDEXER_TYPE`: **bleve**: Code search engine type, could be `bleve` or `elasticsearch`.
- `REPO_INDEXER_PATH`: **indexers/repos.bleve**: Index file used for code search.
- `REPO_INDEXER_CONN_STR`: ****: Code indexer connection string, available when `REPO_INDEXER_TYPE` is elasticsearch. i.e. http://elastic:changeme@localhost:9200
- `REPO_INDEXER_NAME`: **gitea_codes**: Code indexer name, available when `REPO_INDEXER_TYPE` is elasticsearch
- `REPO_INDEXER_INCLUDE`: **empty**: A comma separated list of glob patterns (see https://github.com/gobwas/glob) to **include** in the index. Use `**.txt` to match any files with .txt extension. An empty list means include all files.
- `REPO_INDEXER_EXCLUDE`: **empty**: A comma separated list of glob patterns (see https://github.com/gobwas/glob) to **exclude** from the index. Files that match this list will not be indexed, even if they match in `REPO_INDEXER_INCLUDE`.
- `REPO_INDEXER_EXCLUDE_VENDORED`: **true**: Exclude vendored files from index.
- `UPDATE_BUFFER_LEN`: **20**: Buffer length of index request. **DEPRECATED** use settings in `[queue.issue_indexer]`.
2018-02-08 02:10:36 +00:00
- `MAX_FILE_SIZE`: **1048576**: Maximum size in bytes of files to be indexed.
- `STARTUP_TIMEOUT`: **30s**: If the indexer takes longer than this timeout to start - fail. (This timeout will be added to the hammer time above for child processes - as bleve will not start until the previous parent is shutdown.) Set to -1 to never timeout.
Graceful Queues: Issue Indexing and Tasks (#9363) * Queue: Add generic graceful queues with settings * Queue & Setting: Add worker pool implementation * Queue: Add worker settings * Queue: Make resizing worker pools * Queue: Add name variable to queues * Queue: Add monitoring * Queue: Improve logging * Issues: Gracefulise the issues indexer Remove the old now unused specific queues * Task: Move to generic queue and gracefulise * Issues: Standardise the issues indexer queue settings * Fix test * Queue: Allow Redis to connect to unix * Prevent deadlock during early shutdown of issue indexer * Add MaxWorker settings to queues * Merge branch 'master' into graceful-queues * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_disk.go * Update modules/queue/queue_disk_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Rename queue.Description to queue.ManagedQueue as per @guillep2k * Cancel pool workers when removed * Remove dependency on queue from setting * Update modules/queue/queue_redis.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * As per @guillep2k add mutex locks on shutdown/terminate * move unlocking out of setInternal * Add warning if number of workers < 0 * Small changes as per @guillep2k * No redis host specified not found * Clean up documentation for queues * Update docs/content/doc/advanced/config-cheat-sheet.en-us.md * Update modules/indexer/issues/indexer_test.go * Ensure that persistable channel queue is added to manager * Rename QUEUE_NAME REDIS_QUEUE_NAME * Revert "Rename QUEUE_NAME REDIS_QUEUE_NAME" This reverts commit 1f83b4fc9b9dabda186257b38c265fe7012f90df. Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: techknowlogick <matti@mdranta.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-01-07 11:23:09 +00:00
## Queue (`queue` and `queue.*`)
Configuration at `[queue]` will set defaults for queues with overrides for individual queues at `[queue.*]`. (However see below.)
- `TYPE`: **persistable-channel**: General queue type, currently support: `persistable-channel` (uses a LevelDB internally), `channel`, `level`, `redis`, `dummy`
- `DATADIR`: **queues/**: Base DataDir for storing persistent and level queues. `DATADIR` for individual queues can be set in `queue.name` sections but will default to `DATADIR/`**`common`**. (Previously each queue would default to `DATADIR/`**`name`**.) Relative paths will be made absolute against `%(APP_DATA_PATH)s`.
Graceful Queues: Issue Indexing and Tasks (#9363) * Queue: Add generic graceful queues with settings * Queue & Setting: Add worker pool implementation * Queue: Add worker settings * Queue: Make resizing worker pools * Queue: Add name variable to queues * Queue: Add monitoring * Queue: Improve logging * Issues: Gracefulise the issues indexer Remove the old now unused specific queues * Task: Move to generic queue and gracefulise * Issues: Standardise the issues indexer queue settings * Fix test * Queue: Allow Redis to connect to unix * Prevent deadlock during early shutdown of issue indexer * Add MaxWorker settings to queues * Merge branch 'master' into graceful-queues * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_disk.go * Update modules/queue/queue_disk_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Rename queue.Description to queue.ManagedQueue as per @guillep2k * Cancel pool workers when removed * Remove dependency on queue from setting * Update modules/queue/queue_redis.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * As per @guillep2k add mutex locks on shutdown/terminate * move unlocking out of setInternal * Add warning if number of workers < 0 * Small changes as per @guillep2k * No redis host specified not found * Clean up documentation for queues * Update docs/content/doc/advanced/config-cheat-sheet.en-us.md * Update modules/indexer/issues/indexer_test.go * Ensure that persistable channel queue is added to manager * Rename QUEUE_NAME REDIS_QUEUE_NAME * Revert "Rename QUEUE_NAME REDIS_QUEUE_NAME" This reverts commit 1f83b4fc9b9dabda186257b38c265fe7012f90df. Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: techknowlogick <matti@mdranta.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-01-07 11:23:09 +00:00
- `LENGTH`: **20**: Maximal queue size before channel queues block
- `BATCH_LENGTH`: **20**: Batch data before passing to the handler
- `CONN_STR`: **redis://127.0.0.1:6379/0**: Connection string for the redis queue type. Options can be set using query params. Similarly LevelDB options can also be set using: **leveldb://relative/path?option=value** or **leveldb:///absolute/path?option=value**, and will override `DATADIR`
- `QUEUE_NAME`: **_queue**: The suffix for default redis and disk queue name. Individual queues will default to **`name`**`QUEUE_NAME` but can be overridden in the specific `queue.name` section.
- `SET_NAME`: **_unique**: The suffix that will be added to the default redis and disk queue `set` name for unique queues. Individual queues will default to
**`name`**`QUEUE_NAME`_`SET_NAME`_ but can be overridden in the specific `queue.name` section.
Graceful Queues: Issue Indexing and Tasks (#9363) * Queue: Add generic graceful queues with settings * Queue & Setting: Add worker pool implementation * Queue: Add worker settings * Queue: Make resizing worker pools * Queue: Add name variable to queues * Queue: Add monitoring * Queue: Improve logging * Issues: Gracefulise the issues indexer Remove the old now unused specific queues * Task: Move to generic queue and gracefulise * Issues: Standardise the issues indexer queue settings * Fix test * Queue: Allow Redis to connect to unix * Prevent deadlock during early shutdown of issue indexer * Add MaxWorker settings to queues * Merge branch 'master' into graceful-queues * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_disk.go * Update modules/queue/queue_disk_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Rename queue.Description to queue.ManagedQueue as per @guillep2k * Cancel pool workers when removed * Remove dependency on queue from setting * Update modules/queue/queue_redis.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * As per @guillep2k add mutex locks on shutdown/terminate * move unlocking out of setInternal * Add warning if number of workers < 0 * Small changes as per @guillep2k * No redis host specified not found * Clean up documentation for queues * Update docs/content/doc/advanced/config-cheat-sheet.en-us.md * Update modules/indexer/issues/indexer_test.go * Ensure that persistable channel queue is added to manager * Rename QUEUE_NAME REDIS_QUEUE_NAME * Revert "Rename QUEUE_NAME REDIS_QUEUE_NAME" This reverts commit 1f83b4fc9b9dabda186257b38c265fe7012f90df. Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: techknowlogick <matti@mdranta.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-01-07 11:23:09 +00:00
- `WRAP_IF_NECESSARY`: **true**: Will wrap queues with a timeoutable queue if the selected queue is not ready to be created - (Only relevant for the level queue.)
- `MAX_ATTEMPTS`: **10**: Maximum number of attempts to create the wrapped queue
- `TIMEOUT`: **GRACEFUL_HAMMER_TIME + 30s**: Timeout the creation of the wrapped queue if it takes longer than this to create.
- Queues by default come with a dynamically scaling worker pool. The following settings configure this:
2022-08-10 17:37:15 +00:00
- `WORKERS`: **0**: Number of initial workers for the queue.
Graceful Queues: Issue Indexing and Tasks (#9363) * Queue: Add generic graceful queues with settings * Queue & Setting: Add worker pool implementation * Queue: Add worker settings * Queue: Make resizing worker pools * Queue: Add name variable to queues * Queue: Add monitoring * Queue: Improve logging * Issues: Gracefulise the issues indexer Remove the old now unused specific queues * Task: Move to generic queue and gracefulise * Issues: Standardise the issues indexer queue settings * Fix test * Queue: Allow Redis to connect to unix * Prevent deadlock during early shutdown of issue indexer * Add MaxWorker settings to queues * Merge branch 'master' into graceful-queues * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_disk.go * Update modules/queue/queue_disk_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Rename queue.Description to queue.ManagedQueue as per @guillep2k * Cancel pool workers when removed * Remove dependency on queue from setting * Update modules/queue/queue_redis.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * As per @guillep2k add mutex locks on shutdown/terminate * move unlocking out of setInternal * Add warning if number of workers < 0 * Small changes as per @guillep2k * No redis host specified not found * Clean up documentation for queues * Update docs/content/doc/advanced/config-cheat-sheet.en-us.md * Update modules/indexer/issues/indexer_test.go * Ensure that persistable channel queue is added to manager * Rename QUEUE_NAME REDIS_QUEUE_NAME * Revert "Rename QUEUE_NAME REDIS_QUEUE_NAME" This reverts commit 1f83b4fc9b9dabda186257b38c265fe7012f90df. Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: techknowlogick <matti@mdranta.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-01-07 11:23:09 +00:00
- `MAX_WORKERS`: **10**: Maximum number of worker go-routines for the queue.
- `BLOCK_TIMEOUT`: **1s**: If the queue blocks for this time, boost the number of workers - the `BLOCK_TIMEOUT` will then be doubled before boosting again whilst the boost is ongoing.
- `BOOST_TIMEOUT`: **5m**: Boost workers will timeout after this long.
2022-08-10 17:37:15 +00:00
- `BOOST_WORKERS`: **1**: This many workers will be added to the worker pool if there is a boost.
Graceful Queues: Issue Indexing and Tasks (#9363) * Queue: Add generic graceful queues with settings * Queue & Setting: Add worker pool implementation * Queue: Add worker settings * Queue: Make resizing worker pools * Queue: Add name variable to queues * Queue: Add monitoring * Queue: Improve logging * Issues: Gracefulise the issues indexer Remove the old now unused specific queues * Task: Move to generic queue and gracefulise * Issues: Standardise the issues indexer queue settings * Fix test * Queue: Allow Redis to connect to unix * Prevent deadlock during early shutdown of issue indexer * Add MaxWorker settings to queues * Merge branch 'master' into graceful-queues * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/indexer/issues/indexer.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Update modules/queue/queue_disk.go * Update modules/queue/queue_disk_channel.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * Rename queue.Description to queue.ManagedQueue as per @guillep2k * Cancel pool workers when removed * Remove dependency on queue from setting * Update modules/queue/queue_redis.go Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com> * As per @guillep2k add mutex locks on shutdown/terminate * move unlocking out of setInternal * Add warning if number of workers < 0 * Small changes as per @guillep2k * No redis host specified not found * Clean up documentation for queues * Update docs/content/doc/advanced/config-cheat-sheet.en-us.md * Update modules/indexer/issues/indexer_test.go * Ensure that persistable channel queue is added to manager * Rename QUEUE_NAME REDIS_QUEUE_NAME * Revert "Rename QUEUE_NAME REDIS_QUEUE_NAME" This reverts commit 1f83b4fc9b9dabda186257b38c265fe7012f90df. Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> Co-authored-by: Lauris BH <lauris@nix.lv> Co-authored-by: techknowlogick <matti@mdranta.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-01-07 11:23:09 +00:00
Gitea creates the following non-unique queues:
- `code_indexer`
- `issue_indexer`
- `notification-service`
- `task`
- `mail`
- `push_update`
And the following unique queues:
- `repo_stats_update`
- `repo-archive`
- `mirror`
- `pr_patch_checker`
Certain queues have defaults that override the defaults set in `[queue]` (this occurs mostly to support older configuration):
- `[queue.issue_indexer]`
- `TYPE` this will default to `[queue]` `TYPE` if it is set but if not it will appropriately convert `[indexer]` `ISSUE_INDEXER_QUEUE_TYPE` if that is set.
- `LENGTH` will default to `[indexer]` `UPDATE_BUFFER_LEN` if that is set.
- `BATCH_LENGTH` will default to `[indexer]` `ISSUE_INDEXER_QUEUE_BATCH_NUMBER` if that is set.
- `DATADIR` will default to `[indexer]` `ISSUE_INDEXER_QUEUE_DIR` if that is set.
- `CONN_STR` will default to `[indexer]` `ISSUE_INDEXER_QUEUE_CONN_STR` if that is set.
- `[queue.mailer]`
- `LENGTH` will default to **100** or whatever `[mailer]` `SEND_BUFFER_LEN` is.
- `[queue.pr_patch_checker]`
- `LENGTH` will default to **1000** or whatever `[repository]` `PULL_REQUEST_QUEUE_LENGTH` is.
- `[queue.mirror]`
- `LENGTH` will default to **1000** or whatever `[repository]` `MIRROR_QUEUE_LENGTH` is.
## Admin (`admin`)
- `DEFAULT_EMAIL_NOTIFICATIONS`: **enabled**: Default configuration for email notifications for users (user configurable). Options: enabled, onmention, disabled
- `DISABLE_REGULAR_ORG_CREATION`: **false**: Disallow regular (non-admin) users from creating organizations.
## Security (`security`)
- `INSTALL_LOCK`: **false**: Controls access to the installation page. When set to "true", the installation page is not accessible.
- `SECRET_KEY`: **\<random at every install\>**: Global secret key. This key is VERY IMPORTANT, if you lost it, the data encrypted by it (like 2FA secret) can't be decrypted anymore.
- `SECRET_KEY_URI`: **<empty>**: Instead of defining SECRET_KEY, this option can be used to use the key stored in a file (example value: `file:/etc/gitea/secret_key`). It shouldn't be lost like SECRET_KEY.
- `LOGIN_REMEMBER_DAYS`: **7**: Cookie lifetime, in days.
- `COOKIE_USERNAME`: **gitea\_awesome**: Name of the cookie used to store the current username.
- `COOKIE_REMEMBER_NAME`: **gitea\_incredible**: Name of cookie used to store authentication
information.
- `REVERSE_PROXY_AUTHENTICATION_USER`: **X-WEBAUTH-USER**: Header name for reverse proxy
authentication.
- `REVERSE_PROXY_AUTHENTICATION_EMAIL`: **X-WEBAUTH-EMAIL**: Header name for reverse proxy
authentication provided email.
- `REVERSE_PROXY_AUTHENTICATION_FULL_NAME`: **X-WEBAUTH-FULLNAME**: Header name for reverse proxy
authentication provided full name.
- `REVERSE_PROXY_LIMIT`: **1**: Interpret X-Forwarded-For header or the X-Real-IP header and set this as the remote IP for the request.
Number of trusted proxy count. Set to zero to not use these headers.
- `REVERSE_PROXY_TRUSTED_PROXIES`: **127.0.0.0/8,::1/128**: List of IP addresses and networks separated by comma of trusted proxy servers. Use `*` to trust all.
- `DISABLE_GIT_HOOKS`: **true**: Set to `false` to enable users with Git Hook privilege to create custom Git Hooks.
WARNING: Custom Git Hooks can be used to perform arbitrary code execution on the host operating system.
This enables the users to access and modify this config file and the Gitea database and interrupt the Gitea service.
By modifying the Gitea database, users can gain Gitea administrator privileges.
It also enables them to access other resources available to the user on the operating system that is running the
Gitea instance and perform arbitrary actions in the name of the Gitea OS user.
This maybe harmful to you website or your operating system.
Setting this to true does not change existing hooks in git repos; adjust it before if necessary.
- `DISABLE_WEBHOOKS`: **false**: Set to `true` to disable webhooks feature.
- `ONLY_ALLOW_PUSH_IF_GITEA_ENVIRONMENT_SET`: **true**: Set to `false` to allow local users to push to gitea-repositories without setting up the Gitea environment. This is not recommended and if you want local users to push to Gitea repositories you should set the environment appropriately.
- `IMPORT_LOCAL_PATHS`: **false**: Set to `false` to prevent all users (including admin) from importing local path on server.
- `INTERNAL_TOKEN`: **\<random at every install if no uri set\>**: Secret used to validate communication within Gitea binary.
- `INTERNAL_TOKEN_URI`: **<empty>**: Instead of defining INTERNAL_TOKEN in the configuration, this configuration option can be used to give Gitea a path to a file that contains the internal token (example value: `file:/etc/gitea/internal_token`)
- `PASSWORD_HASH_ALGO`: **pbkdf2**: The hash algorithm to use \[argon2, pbkdf2, pbkdf2_v1, pbkdf2_hi, scrypt, bcrypt\], argon2 and scrypt will spend significant amounts of memory.
- Note: The default parameters for `pbkdf2` hashing have changed - the previous settings are available as `pbkdf2_v1` but are not recommended.
- The hash functions may be tuned by using `$` after the algorithm:
- `argon2$<time>$<memory>$<threads>$<key-length>`
- `bcrypt$<cost>`
- `pbkdf2$<iterations>$<key-length>`
- `scrypt$<n>$<r>$<p>$<key-length>`
- The defaults are:
- `argon2`: `argon2$2$65536$8$50`
- `bcrypt`: `bcrypt$10`
- `pbkdf2`: `pbkdf2$50000$50`
- `pbkdf2_v1`: `pbkdf2$10000$50`
- `pbkdf2_v2`: `pbkdf2$50000$50`
- `pbkdf2_hi`: `pbkdf2$320000$50`
- `scrypt`: `scrypt$65536$16$2$50`
- Adjusting the algorithm parameters using this functionality is done at your own risk.
- `CSRF_COOKIE_HTTP_ONLY`: **true**: Set false to allow JavaScript to read CSRF cookie.
- `MIN_PASSWORD_LENGTH`: **6**: Minimum password length for new users.
- `PASSWORD_COMPLEXITY`: **off**: Comma separated list of character classes required to pass minimum complexity. If left empty or no valid values are specified, checking is disabled (off):
- lower - use one or more lower latin characters
- upper - use one or more upper latin characters
- digit - use one or more digits
- spec - use one or more special characters as ``!"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~``
- off - do not check password complexity
- `PASSWORD_CHECK_PWN`: **false**: Check [HaveIBeenPwned](https://haveibeenpwned.com/Passwords) to see if a password has been exposed.
- `SUCCESSFUL_TOKENS_CACHE_SIZE`: **20**: Cache successful token hashes. API tokens are stored in the DB as pbkdf2 hashes however, this means that there is a potentially significant hashing load when there are multiple API operations. This cache will store the successfully hashed tokens in a LRU cache as a balance between performance and security.
## Camo (`camo`)
- `ENABLED`: **false**: Enable media proxy, we support images only at the moment.
- `SERVER_URL`: **<empty>**: URL of camo server, it **is required** if camo is enabled.
- `HMAC_KEY`: **<empty>**: Provide the HMAC key for encoding URLs, it **is required** if camo is enabled.
- `ALLWAYS`: **false**: Set to true to use camo for both HTTP and HTTPS content, otherwise only non-HTTPS URLs are proxied
## OpenID (`openid`)
- `ENABLE_OPENID_SIGNIN`: **false**: Allow authentication in via OpenID.
- `ENABLE_OPENID_SIGNUP`: **! DISABLE\_REGISTRATION**: Allow registering via OpenID.
- `WHITELISTED_URIS`: **\<empty\>**: If non-empty, list of POSIX regex patterns matching
OpenID URI's to permit.
- `BLACKLISTED_URIS`: **\<empty\>**: If non-empty, list of POSIX regex patterns matching
OpenID URI's to block.
## OAuth2 Client (`oauth2_client`)
- `REGISTER_EMAIL_CONFIRM`: _[service]_ **REGISTER\_EMAIL\_CONFIRM**: Set this to enable or disable email confirmation of OAuth2 auto-registration. (Overwrites the REGISTER\_EMAIL\_CONFIRM setting of the `[service]` section)
- `OPENID_CONNECT_SCOPES`: **\<empty\>**: List of additional openid connect scopes. (`openid` is implicitly added)
- `ENABLE_AUTO_REGISTRATION`: **false**: Automatically create user accounts for new oauth2 users.
- `USERNAME`: **nickname**: The source of the username for new oauth2 accounts:
- userid - use the userid / sub attribute
- nickname - use the nickname attribute
- email - use the username part of the email attribute
- `UPDATE_AVATAR`: **false**: Update avatar if available from oauth2 provider. Update will be performed on each login.
- `ACCOUNT_LINKING`: **login**: How to handle if an account / email already exists:
- disabled - show an error
- login - show an account linking login
- auto - automatically link with the account (Please be aware that this will grant access to an existing account just because the same username or email is provided. You must make sure that this does not cause issues with your authentication providers.)
## Service (`service`)
- `ACTIVE_CODE_LIVE_MINUTES`: **180**: Time limit (min) to confirm account/email registration.
- `RESET_PASSWD_CODE_LIVE_MINUTES`: **180**: Time limit (min) to confirm forgot password reset
process.
- `REGISTER_EMAIL_CONFIRM`: **false**: Enable this to ask for mail confirmation of registration.
Requires `Mailer` to be enabled.
- `REGISTER_MANUAL_CONFIRM`: **false**: Enable this to manually confirm new registrations.
Requires `REGISTER_EMAIL_CONFIRM` to be disabled.
- `DISABLE_REGISTRATION`: **false**: Disable registration, after which only admin can create
accounts for users.
- `REQUIRE_EXTERNAL_REGISTRATION_PASSWORD`: **false**: Enable this to force externally created
accounts (via GitHub, OpenID Connect, etc) to create a password. Warning: enabling this will
decrease security, so you should only enable it if you know what you're doing.
- `REQUIRE_SIGNIN_VIEW`: **false**: Enable this to force users to log in to view any page or to use API.
- `ENABLE_NOTIFY_MAIL`: **false**: Enable this to send e-mail to watchers of a repository when
something happens, like creating issues. Requires `Mailer` to be enabled.
- `ENABLE_BASIC_AUTHENTICATION`: **true**: Disable this to disallow authenticaton using HTTP
BASIC and the user's password. Please note if you disable this you will not be able to access the
tokens API endpoints using a password. Further, this only disables BASIC authentication using the
password - not tokens or OAuth Basic.
- `ENABLE_REVERSE_PROXY_AUTHENTICATION`: **false**: Enable this to allow reverse proxy authentication.
- `ENABLE_REVERSE_PROXY_AUTO_REGISTRATION`: **false**: Enable this to allow auto-registration
for reverse authentication.
- `ENABLE_REVERSE_PROXY_EMAIL`: **false**: Enable this to allow to auto-registration with a
provided email rather than a generated email.
- `ENABLE_REVERSE_PROXY_FULL_NAME`: **false**: Enable this to allow to auto-registration with a
provided full name for the user.
- `ENABLE_CAPTCHA`: **false**: Enable this to use captcha validation for registration.
- `REQUIRE_CAPTCHA_FOR_LOGIN`: **false**: Enable this to require captcha validation for login. You also must enable `ENABLE_CAPTCHA`.
- `REQUIRE_EXTERNAL_REGISTRATION_CAPTCHA`: **false**: Enable this to force captcha validation
even for External Accounts (i.e. GitHub, OpenID Connect, etc). You also must enable `ENABLE_CAPTCHA`.
- `CAPTCHA_TYPE`: **image**: \[image, recaptcha, hcaptcha, mcaptcha, cfturnstile\]
- `RECAPTCHA_SECRET`: **""**: Go to https://www.google.com/recaptcha/admin to get a secret for recaptcha.
- `RECAPTCHA_SITEKEY`: **""**: Go to https://www.google.com/recaptcha/admin to get a sitekey for recaptcha.
- `RECAPTCHA_URL`: **https://www.google.com/recaptcha/**: Set the recaptcha url - allows the use of recaptcha net.
- `HCAPTCHA_SECRET`: **""**: Sign up at https://www.hcaptcha.com/ to get a secret for hcaptcha.
- `HCAPTCHA_SITEKEY`: **""**: Sign up at https://www.hcaptcha.com/ to get a sitekey for hcaptcha.
- `MCAPTCHA_SECRET`: **""**: Go to your mCaptcha instance to get a secret for mCaptcha.
- `MCAPTCHA_SITEKEY`: **""**: Go to your mCaptcha instance to get a sitekey for mCaptcha.
- `MCAPTCHA_URL` **https://demo.mcaptcha.org/**: Set the mCaptcha URL.
- `CF_TURNSTILE_SECRET` **""**: Go to https://dash.cloudflare.com/?to=/:account/turnstile to get a secret for cloudflare turnstile.
- `CF_TURNSTILE_SITEKEY` **""**: Go to https://dash.cloudflare.com/?to=/:account/turnstile to get a sitekey for cloudflare turnstile.
- `DEFAULT_KEEP_EMAIL_PRIVATE`: **false**: By default set users to keep their email address private.
- `DEFAULT_ALLOW_CREATE_ORGANIZATION`: **true**: Allow new users to create organizations by default.
- `DEFAULT_USER_IS_RESTRICTED`: **false**: Give new users restricted permissions by default
- `DEFAULT_ENABLE_DEPENDENCIES`: **true**: Enable this to have dependencies enabled by default.
Allow cross-repository dependencies on issues (#7901) * in progress changes for #7405, added ability to add cross-repo dependencies * removed unused repolink var * fixed query that was breaking ci tests; fixed check in issue dependency add so that the id of the issue and dependency is checked rather than the indexes * reverted removal of string in local files becasue these are done via crowdin, not updated manually * removed 'Select("issue.*")' from getBlockedByDependencies and getBlockingDependencies based on comments in PR review * changed getBlockedByDependencies and getBlockingDependencies to use a more xorm-like query, also updated the sidebar as a result * simplified the getBlockingDependencies and getBlockedByDependencies methods; changed the sidebar to show the dependencies in a different format where you can see the name of the repository * made some changes to the issue view in the dependencies (issue name on top, repo full name on separate line). Change view of issue in the dependency search results (also showing the full repo name on separate line) * replace call to FindUserAccessibleRepoIDs with SearchRepositoryByName. The former was hardcoded to use isPrivate = false on the repo search, but this code needed it to be true. The SearchRepositoryByName method is used more in the code including on the user's dashboard * some more tweaks to the layout of the issues when showing dependencies and in the search box when you add new dependencies * added Name to the RepositoryMeta struct * updated swagger doc * fixed total count for link header on SearchIssues * fixed indentation * fixed aligment of remove icon on dependencies in issue sidebar * removed unnecessary nil check (unnecessary because issue.loadRepo is called prior to this block) * reverting .css change, somehow missed or forgot that less is used * updated less file and generated css; updated sidebar template with styles to line up delete and issue index * added ordering to the blocked by/depends on queries * fixed sorting in issue dependency search and the depends on/blocks views to show issues from the current repo first, then by created date descending; added a "all cross repository dependencies" setting to allow this feature to be turned off, if turned off, the issue dependency search will work the way it did before (restricted to the current repository) * re-applied my swagger changes after merge * fixed split string condition in issue search * changed ALLOW_CROSS_REPOSITORY_DEPENDENCIES description to sound more global than just the issue dependency search; returning 400 in the cross repo issue search api method if not enabled; fixed bug where the issue count did not respect the state parameter * when adding a dependency to an issue, added a check to make sure the issue and dependency are in the same repo if cross repo dependencies is not enabled * updated sortIssuesSession call in PullRequests, another commit moved this method from pull.go to pull_list.go so I had to re-apply my change here * fixed incorrect setting of user id parameter in search repos call
2019-10-31 05:06:10 +00:00
- `ALLOW_CROSS_REPOSITORY_DEPENDENCIES` : **true** Enable this to allow dependencies on issues from any repository where the user is granted access.
- `ENABLE_USER_HEATMAP`: **true**: Enable this to display the heatmap on users profiles.
- `ENABLE_TIMETRACKING`: **true**: Enable Timetracking feature.
2021-07-23 13:05:37 +00:00
- `DEFAULT_ENABLE_TIMETRACKING`: **true**: Allow repositories to use timetracking by default.
- `DEFAULT_ALLOW_ONLY_CONTRIBUTORS_TO_TRACK_TIME`: **true**: Only allow users with write permissions to track time.
- `EMAIL_DOMAIN_WHITELIST`: **\<empty\>**: If non-empty, list of domain names that can only be used to register
on this instance.
- `EMAIL_DOMAIN_BLOCKLIST`: **\<empty\>**: If non-empty, list of domain names that cannot be used to register on this instance
- `SHOW_REGISTRATION_BUTTON`: **! DISABLE\_REGISTRATION**: Show Registration Button
- `SHOW_MILESTONES_DASHBOARD_PAGE`: **true** Enable this to show the milestones dashboard page - a view of all the user's milestones
- `AUTO_WATCH_NEW_REPOS`: **true**: Enable this to let all organisation users watch new repos when they are created
- `AUTO_WATCH_ON_CHANGES`: **false**: Enable this to make users watch a repository after their first commit to it
- `DEFAULT_USER_VISIBILITY`: **public**: Set default visibility mode for users, either "public", "limited" or "private".
- `ALLOWED_USER_VISIBILITY_MODES`: **public,limited,private**: Set which visibility modes a user can have
- `DEFAULT_ORG_VISIBILITY`: **public**: Set default visibility mode for organisations, either "public", "limited" or "private".
- `DEFAULT_ORG_MEMBER_VISIBLE`: **false** True will make the membership of the users visible when added to the organisation.
- `ALLOW_ONLY_INTERNAL_REGISTRATION`: **false** Set to true to force registration only via Gitea.
- `ALLOW_ONLY_EXTERNAL_REGISTRATION`: **false** Set to true to force registration only using third-party services.
- `NO_REPLY_ADDRESS`: **noreply.DOMAIN** Value for the domain part of the user's email address in the Git log if user has set KeepEmailPrivate to true. DOMAIN resolves to the value in server.DOMAIN.
The user's email will be replaced with a concatenation of the user name in lower case, "@" and NO_REPLY_ADDRESS.
- `USER_DELETE_WITH_COMMENTS_MAX_TIME`: **0** Minimum amount of time a user must exist before comments are kept when the user is deleted.
- `VALID_SITE_URL_SCHEMES`: **http, https**: Valid site url schemes for user profiles
### Service - Explore (`service.explore`)
- `REQUIRE_SIGNIN_VIEW`: **false**: Only allow signed in users to view the explore pages.
- `DISABLE_USERS_PAGE`: **false**: Disable the users explore page.
## SSH Minimum Key Sizes (`ssh.minimum_key_sizes`)
Define allowed algorithms and their minimum key length (use -1 to disable a type):
- `ED25519`: **256**
- `ECDSA`: **256**
- `RSA`: **2047**: We set 2047 here because an otherwise valid 2048 RSA key can be reported as 2047 length.
- `DSA`: **-1**: DSA is now disabled by default. Set to **1024** to re-enable but ensure you may need to reconfigure your SSHD provider
## Webhook (`webhook`)
- `QUEUE_LENGTH`: **1000**: Hook task queue length. Use caution when editing this value.
- `DELIVER_TIMEOUT`: **5**: Delivery timeout (sec) for shooting webhooks.
2022-08-10 17:37:15 +00:00
- `ALLOWED_HOST_LIST`: **external**: Webhook can only call allowed hosts for security reasons. Comma separated list.
- Built-in networks:
- `loopback`: 127.0.0.0/8 for IPv4 and ::1/128 for IPv6, localhost is included.
- `private`: RFC 1918 (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16) and RFC 4193 (FC00::/7). Also called LAN/Intranet.
- `external`: A valid non-private unicast IP, you can access all hosts on public internet.
- `*`: All hosts are allowed.
- CIDR list: `1.2.3.0/8` for IPv4 and `2001:db8::/32` for IPv6
- Wildcard hosts: `*.mydomain.com`, `192.168.100.*`
- `SKIP_TLS_VERIFY`: **false**: Allow insecure certification.
- `PAGING_NUM`: **10**: Number of webhook history events that are shown in one page.
- `PROXY_URL`: **\<empty\>**: Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy. If not given, will use global proxy setting.
- `PROXY_HOSTS`: **\<empty\>`**: Comma separated list of host names requiring proxy. Glob patterns (*) are accepted; use ** to match all hosts. If not given, will use global proxy setting.
## Mailer (`mailer`)
2022-08-10 17:37:15 +00:00
⚠️ This section is for Gitea 1.18 and later. If you are using Gitea 1.17 or older,
please refer to
[Gitea 1.17 app.ini example](https://github.com/go-gitea/gitea/blob/release/v1.17/custom/conf/app.example.ini)
and
[Gitea 1.17 configuration document](https://github.com/go-gitea/gitea/blob/release/v1.17/docs/content/doc/advanced/config-cheat-sheet.en-us.md)
- `ENABLED`: **false**: Enable to use a mail service.
- `PROTOCOL`: **\<empty\>**: Mail server protocol. One of "smtp", "smtps", "smtp+starttls", "smtp+unix", "sendmail", "dummy". _Before 1.18, this was inferred from a combination of `MAILER_TYPE` and `IS_TLS_ENABLED`._
- SMTP family, if your provider does not explicitly say which protocol it uses but does provide a port, you can set SMTP_PORT instead and this will be inferred.
- **sendmail** Use the operating system's `sendmail` command instead of SMTP. This is common on Linux systems.
- **dummy** Send email messages to the log as a testing phase.
- Note that enabling sendmail will ignore all other `mailer` settings except `ENABLED`, `FROM`, `SUBJECT_PREFIX` and `SENDMAIL_PATH`.
- Enabling dummy will ignore all settings except `ENABLED`, `SUBJECT_PREFIX` and `FROM`.
- `SMTP_ADDR`: **\<empty\>**: Mail server address. e.g. smtp.gmail.com. For smtp+unix, this should be a path to a unix socket instead. _Before 1.18, this was combined with `SMTP_PORT` under the name `HOST`._
- `SMTP_PORT`: **\<empty\>**: Mail server port. If no protocol is specified, it will be inferred by this setting. Common ports are listed below. _Before 1.18, this was combined with `SMTP_ADDR` under the name `HOST`._
- 25: insecure SMTP
- 465: SMTP Secure
- 587: StartTLS
- `USE_CLIENT_CERT`: **false**: Use client certificate for TLS/SSL.
- `CLIENT_CERT_FILE`: **custom/mailer/cert.pem**: Client certificate file.
- `CLIENT_KEY_FILE`: **custom/mailer/key.pem**: Client key file.
- `FORCE_TRUST_SERVER_CERT`: **false**: If set to `true`, completely ignores server certificate validation errors. This option is unsafe. Consider adding the certificate to the system trust store instead.
- `USER`: **\<empty\>**: Username of mailing user (usually the sender's e-mail address).
- `PASSWD`: **\<empty\>**: Password of mailing user. Use \`your password\` for quoting if you use special characters in the password.
- Please note: authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via `STARTTLS`) or SMTP host is localhost. See [Email Setup]({{< relref "doc/usage/email-setup.en-us.md" >}}) for more information.
- `ENABLE_HELO`: **true**: Enable HELO operation.
- `HELO_HOSTNAME`: **(retrieved from system)**: HELO hostname.
- `FROM`: **\<empty\>**: Mail from address, RFC 5322. This can be just an email address, or the "Name" \<email@example.com\> format.
- `ENVELOPE_FROM`: **\<empty\>**: Address set as the From address on the SMTP mail envelope. Set to `<>` to send an empty address.
- `SUBJECT_PREFIX`: **\<empty\>**: Prefix to be placed before e-mail subject lines.
- `SENDMAIL_PATH`: **sendmail**: The location of sendmail on the operating system (can be command or full path).
- `SENDMAIL_ARGS`: **\<empty\>**: Specify any extra sendmail arguments. (NOTE: you should be aware that email addresses can look like options - if your `sendmail` command takes options you must set the option terminator `--`)
- `SENDMAIL_TIMEOUT`: **5m**: default timeout for sending email through sendmail
- `SENDMAIL_CONVERT_CRLF`: **true**: Most versions of sendmail prefer LF line endings rather than CRLF line endings. Set this to false if your version of sendmail requires CRLF line endings.
- `SEND_BUFFER_LEN`: **100**: Buffer length of mailing queue. **DEPRECATED** use `LENGTH` in `[queue.mailer]`
- `SEND_AS_PLAIN_TEXT`: **false**: Send mails only in plain text, without HTML alternative.
## Incoming Email (`email.incoming`)
- `ENABLED`: **false**: Enable handling of incoming emails.
- `REPLY_TO_ADDRESS`: **\<empty\>**: The email address including the `%{token}` placeholder that will be replaced per user/action. Example: `incoming+%{token}@example.com`. The placeholder must appear in the user part of the address (before the `@`).
- `HOST`: **\<empty\>**: IMAP server host.
- `PORT`: **\<empty\>**: IMAP server port.
- `USERNAME`: **\<empty\>**: Username of the receiving account.
- `PASSWORD`: **\<empty\>**: Password of the receiving account.
- `USE_TLS`: **false**: Whether the IMAP server uses TLS.
- `SKIP_TLS_VERIFY`: **false**: If set to `true`, completely ignores server certificate validation errors. This option is unsafe.
- `MAILBOX`: **INBOX**: The mailbox name where incoming mail will end up.
- `DELETE_HANDLED_MESSAGE`: **true**: Whether handled messages should be deleted from the mailbox.
- `MAXIMUM_MESSAGE_SIZE`: **10485760**: Maximum size of a message to handle. Bigger messages are ignored. Set to 0 to allow every size.
## Cache (`cache`)
- `ENABLED`: **true**: Enable the cache.
- `ADAPTER`: **memory**: Cache engine adapter, either `memory`, `redis`, `twoqueue` or `memcache`. (`twoqueue` represents a size limited LRU cache.)
- `INTERVAL`: **60**: Garbage Collection interval (sec), for memory and twoqueue cache only.
- `HOST`: **\<empty\>**: Connection string for `redis` and `memcache`. For `twoqueue` sets configuration for the queue.
- Redis: `redis://:macaron@127.0.0.1:6379/0?pool_size=100&idle_timeout=180s`
- Memcache: `127.0.0.1:9090;127.0.0.1:9091`
- TwoQueue LRU cache: `{"size":50000,"recent_ratio":0.25,"ghost_ratio":0.5}` or `50000` representing the maximum number of objects stored in the cache.
- `ITEM_TTL`: **16h**: Time to keep items in cache if not used, Setting it to -1 disables caching.
## Cache - LastCommitCache settings (`cache.last_commit`)
- `ENABLED`: **true**: Enable the cache.
- `ITEM_TTL`: **8760h**: Time to keep items in cache if not used, Setting it to -1 disables caching.
- `COMMITS_COUNT`: **1000**: Only enable the cache when repository's commits count great than.
## Session (`session`)
- `PROVIDER`: **memory**: Session engine provider \[memory, file, redis, db, mysql, couchbase, memcache, postgres\]. Setting `db` will reuse the configuration in `[database]`
- `PROVIDER_CONFIG`: **data/sessions**: For file, the root path; for db, empty (database config will be used); for others, the connection string. Relative paths will be made absolute against _`AppWorkPath`_.
- `COOKIE_SECURE`: **false**: Enable this to force using HTTPS for all session access.
- `COOKIE_NAME`: **i\_like\_gitea**: The name of the cookie used for the session ID.
- `GC_INTERVAL_TIME`: **86400**: GC interval in seconds.
- `SESSION_LIFE_TIME`: **86400**: Session life time in seconds, default is 86400 (1 day)
- `DOMAIN`: **\<empty\>**: Sets the cookie Domain
- `SAME_SITE`: **lax** \[strict, lax, none\]: Set the SameSite setting for the cookie.
## Picture (`picture`)
- `GRAVATAR_SOURCE`: **gravatar**: Can be `gravatar`, `duoshuo` or anything like
`http://cn.gravatar.com/avatar/`.
- `DISABLE_GRAVATAR`: **false**: Enable this to use local avatars only. **DEPRECATED [v1.18+]** moved to database. Use admin panel to configure.
- `ENABLE_FEDERATED_AVATAR`: **false**: Enable support for federated avatars (see
[http://www.libravatar.org](http://www.libravatar.org)). **DEPRECATED [v1.18+]** moved to database. Use admin panel to configure.
- `AVATAR_STORAGE_TYPE`: **default**: Storage type defined in `[storage.xxx]`. Default is `default` which will read `[storage]` if no section `[storage]` will be a type `local`.
Repository avatars (#6986) * Repository avatars - first variant of code from old work for gogs - add migration 87 - add new option in app.ini - add en-US locale string - add new class in repository.less * Add changed index.css, remove unused template name * Update en-us doc about configuration options * Add comments to new functions, add new option to docker app.ini * Add comment for lint * Remove variable, not needed * Fix formatting * Update swagger api template * Check if avatar exists * Fix avatar link/path checks * Typo * TEXT column can't have a default value * Fixes: - remove old avatar file on upload - use ID in name of avatar file - users may upload same files - add simple tests * Fix fmt check * Generate PNG instead of "static" GIF * More informative comment * Fix error message * Update avatar upload checks: - add file size check - add new option - update config docs - add new string to en-us locale * Fixes: - use FileHEader field for check file size - add new test - upload big image * Fix formatting * Update comments * Update log message * Removed wrong style - not needed * Use Sync2 to migrate * Update repos list view - bigger avatar - fix html blocks alignment * A little adjust avatar size * Use small icons for explore/repo list * Use new cool avatar preparation func by @lafriks * Missing changes for new function * Remove unused import, move imports * Missed new option definition in app.ini Add file size check in user/profile avatar upload * Use smaller field length for Avatar * Use session to update repo DB data, update DeleteAvatar - use session too * Fix err variable definition * As suggested @lafriks - return as soon as possible, code readability
2019-05-30 02:22:26 +00:00
- `AVATAR_UPLOAD_PATH`: **data/avatars**: Path to store user avatar image files.
- `AVATAR_MAX_WIDTH`: **4096**: Maximum avatar image width in pixels.
- `AVATAR_MAX_HEIGHT`: **3072**: Maximum avatar image height in pixels.
- `AVATAR_MAX_FILE_SIZE`: **1048576** (1Mb): Maximum avatar image file size in bytes.
- `AVATAR_RENDERED_SIZE_FACTOR`: **3**: The multiplication factor for rendered avatar images. Larger values result in finer rendering on HiDPI devices.
- `REPOSITORY_AVATAR_STORAGE_TYPE`: **default**: Storage type defined in `[storage.xxx]`. Default is `default` which will read `[storage]` if no section `[storage]` will be a type `local`.
Repository avatars (#6986) * Repository avatars - first variant of code from old work for gogs - add migration 87 - add new option in app.ini - add en-US locale string - add new class in repository.less * Add changed index.css, remove unused template name * Update en-us doc about configuration options * Add comments to new functions, add new option to docker app.ini * Add comment for lint * Remove variable, not needed * Fix formatting * Update swagger api template * Check if avatar exists * Fix avatar link/path checks * Typo * TEXT column can't have a default value * Fixes: - remove old avatar file on upload - use ID in name of avatar file - users may upload same files - add simple tests * Fix fmt check * Generate PNG instead of "static" GIF * More informative comment * Fix error message * Update avatar upload checks: - add file size check - add new option - update config docs - add new string to en-us locale * Fixes: - use FileHEader field for check file size - add new test - upload big image * Fix formatting * Update comments * Update log message * Removed wrong style - not needed * Use Sync2 to migrate * Update repos list view - bigger avatar - fix html blocks alignment * A little adjust avatar size * Use small icons for explore/repo list * Use new cool avatar preparation func by @lafriks * Missing changes for new function * Remove unused import, move imports * Missed new option definition in app.ini Add file size check in user/profile avatar upload * Use smaller field length for Avatar * Use session to update repo DB data, update DeleteAvatar - use session too * Fix err variable definition * As suggested @lafriks - return as soon as possible, code readability
2019-05-30 02:22:26 +00:00
- `REPOSITORY_AVATAR_UPLOAD_PATH`: **data/repo-avatars**: Path to store repository avatar image files.
- `REPOSITORY_AVATAR_FALLBACK`: **none**: How Gitea deals with missing repository avatars
- none = no avatar will be displayed
- random = random avatar will be generated
- image = default image will be used (which is set in `REPOSITORY_AVATAR_FALLBACK_IMAGE`)
- `REPOSITORY_AVATAR_FALLBACK_IMAGE`: **/img/repo_default.png**: Image used as default repository avatar (if `REPOSITORY_AVATAR_FALLBACK` is set to image and none was uploaded)
## Project (`project`)
Default templates for project boards:
- `PROJECT_BOARD_BASIC_KANBAN_TYPE`: **To Do, In Progress, Done**
- `PROJECT_BOARD_BUG_TRIAGE_TYPE`: **Needs Triage, High Priority, Low Priority, Closed**
## Issue and pull request attachments (`attachment`)
- `ENABLED`: **true**: Whether issue and pull request attachments are enabled.
- `ALLOWED_TYPES`: **.csv,.docx,.fodg,.fodp,.fods,.fodt,.gif,.gz,.jpeg,.jpg,.log,.md,.mov,.mp4,.odf,.odg,.odp,.ods,.odt,.pdf,.png,.pptx,.svg,.tgz,.txt,.webm,.xls,.xlsx,.zip**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
- `MAX_SIZE`: **4**: Maximum size (MB).
- `MAX_FILES`: **5**: Maximum number of attachments that can be uploaded at once.
- `STORAGE_TYPE`: **local**: Storage type for attachments, `local` for local disk or `minio` for s3 compatible object storage service, default is `local` or other name defined with `[storage.xxx]`
Add a storage layer for attachments (#11387) * Add a storage layer for attachments * Fix some bug * fix test * Fix copyright head and lint * Fix bug * Add setting for minio and flags for migrate-storage * Add documents * fix lint * Add test for minio store type on attachments * fix test * fix test * Apply suggestions from code review Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> * Add warning when storage migrated successfully * Fix drone * fix test * rebase * Fix test * display the error on console * Move minio test to amd64 since minio docker don't support arm64 * refactor the codes * add trace * Fix test * remove log on xorm * Fi download bug * Add a storage layer for attachments * Add setting for minio and flags for migrate-storage * fix lint * Add test for minio store type on attachments * Apply suggestions from code review Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> * Fix drone * fix test * Fix test * display the error on console * Move minio test to amd64 since minio docker don't support arm64 * refactor the codes * add trace * Fix test * Add URL function to serve attachments directly from S3/Minio * Add ability to enable/disable redirection in attachment configuration * Fix typo * Add a storage layer for attachments * Add setting for minio and flags for migrate-storage * fix lint * Add test for minio store type on attachments * Apply suggestions from code review Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> * Fix drone * fix test * Fix test * display the error on console * Move minio test to amd64 since minio docker don't support arm64 * don't change unrelated files * Fix lint * Fix build * update go.mod and go.sum * Use github.com/minio/minio-go/v6 * Remove unused function * Upgrade minio to v7 and some other improvements * fix lint * Fix go mod Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com> Co-authored-by: Tyler <tystuyfzand@gmail.com>
2020-08-18 04:23:45 +00:00
- `SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
- `PATH`: **data/attachments**: Path to store attachments only available when STORAGE_TYPE is `local`
- `MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when STORAGE_TYPE is `minio`
- `MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when STORAGE_TYPE is `minio`
- `MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when STORAGE_TYPE is `minio`
- `MINIO_BUCKET`: **gitea**: Minio bucket to store the attachments only available when STORAGE_TYPE is `minio`
- `MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when STORAGE_TYPE is `minio`
- `MINIO_BASE_PATH`: **attachments/**: Minio base path on the bucket only available when STORAGE_TYPE is `minio`
- `MINIO_USE_SSL`: **false**: Minio enabled ssl only available when STORAGE_TYPE is `minio`
- `MINIO_INSECURE_SKIP_VERIFY`: **false**: Minio skip SSL verification available when STORAGE_TYPE is `minio`
## Log (`log`)
- `ROOT_PATH`: **\<empty\>**: Root path for log files.
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- `MODE`: **console**: Logging mode. For multiple modes, use a comma to separate values. You can configure each mode in per mode log subsections `\[log.modename\]`. By default the file mode will log to `$ROOT_PATH/gitea.log`.
- `LEVEL`: **Info**: General log level. \[Trace, Debug, Info, Warn, Error, Critical, Fatal, None\]
- `STACKTRACE_LEVEL`: **None**: Default log level at which to log create stack traces. \[Trace, Debug, Info, Warn, Error, Critical, Fatal, None\]
- `ENABLE_SSH_LOG`: **false**: save ssh log to log file
- `ENABLE_XORM_LOG`: **true**: Set whether to perform XORM logging. Please note SQL statement logging can be disabled by setting `LOG_SQL` to false in the `[database]` section.
### Router Log (`log`)
- `DISABLE_ROUTER_LOG`: **false**: Mute printing of the router log.
- `ROUTER`: **console**: The mode or name of the log the router should log to. (If you set this to `,` it will log to default Gitea logger.)
NB: You must have `DISABLE_ROUTER_LOG` set to `false` for this option to take effect. Configure each mode in per mode log subsections `\[log.modename.router\]`.
### Access Log (`log`)
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- `ENABLE_ACCESS_LOG`: **false**: Creates an access.log in NCSA common log format, or as per the following template
- `ACCESS`: **file**: Logging mode for the access logger, use a comma to separate values. Configure each mode in per mode log subsections `\[log.modename.access\]`. By default the file mode will log to `$ROOT_PATH/access.log`. (If you set this to `,` it will log to the default Gitea logger.)
- `ACCESS_LOG_TEMPLATE`: **`{{.Ctx.RemoteAddr}} - {{.Identity}} {{.Start.Format "[02/Jan/2006:15:04:05 -0700]" }} "{{.Ctx.Req.Method}} {{.Ctx.Req.URL.RequestURI}} {{.Ctx.Req.Proto}}" {{.ResponseWriter.Status}} {{.ResponseWriter.Size}} "{{.Ctx.Req.Referer}}\" \"{{.Ctx.Req.UserAgent}}"`**: Sets the template used to create the access log.
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- The following variables are available:
Move macaron to chi (#14293) Use [chi](https://github.com/go-chi/chi) instead of the forked [macaron](https://gitea.com/macaron/macaron). Since macaron and chi have conflicts with session share, this big PR becomes a have-to thing. According my previous idea, we can replace macaron step by step but I'm wrong. :( Below is a list of big changes on this PR. - [x] Define `context.ResponseWriter` interface with an implementation `context.Response`. - [x] Use chi instead of macaron, and also a customize `Route` to wrap chi so that the router usage is similar as before. - [x] Create different routers for `web`, `api`, `internal` and `install` so that the codes will be more clear and no magic . - [x] Use https://github.com/unrolled/render instead of macaron's internal render - [x] Use https://github.com/NYTimes/gziphandler instead of https://gitea.com/macaron/gzip - [x] Use https://gitea.com/go-chi/session which is a modified version of https://gitea.com/macaron/session and removed `nodb` support since it will not be maintained. **BREAK** - [x] Use https://gitea.com/go-chi/captcha which is a modified version of https://gitea.com/macaron/captcha - [x] Use https://gitea.com/go-chi/cache which is a modified version of https://gitea.com/macaron/cache - [x] Use https://gitea.com/go-chi/binding which is a modified version of https://gitea.com/macaron/binding - [x] Use https://github.com/go-chi/cors instead of https://gitea.com/macaron/cors - [x] Dropped https://gitea.com/macaron/i18n and make a new one in `code.gitea.io/gitea/modules/translation` - [x] Move validation form structs from `code.gitea.io/gitea/modules/auth` to `code.gitea.io/gitea/modules/forms` to avoid dependency cycle. - [x] Removed macaron log service because it's not need any more. **BREAK** - [x] All form structs have to be get by `web.GetForm(ctx)` in the route function but not as a function parameter on routes definition. - [x] Move Git HTTP protocol implementation to use routers directly. - [x] Fix the problem that chi routes don't support trailing slash but macaron did. - [x] `/api/v1/swagger` now will be redirect to `/api/swagger` but not render directly so that `APIContext` will not create a html render. Notices: - Chi router don't support request with trailing slash - Integration test `TestUserHeatmap` maybe mysql version related. It's failed on my macOS(mysql 5.7.29 installed via brew) but succeed on CI. Co-authored-by: 6543 <6543@obermui.de>
2021-01-26 15:36:53 +00:00
- `Ctx`: the `context.Context` of the request.
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- `Identity`: the SignedUserName or `"-"` if not logged in.
- `Start`: the start time of the request.
- `ResponseWriter`: the responseWriter from the request.
- `RequestID`: the value matching REQUEST_ID_HEADERSdefault: `-`, if not matched.
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- You must be very careful to ensure that this template does not throw errors or panics as this template runs outside of the panic/recovery script.
- `REQUEST_ID_HEADERS`: **\<empty\>**: You can configure multiple values that are splited by comma here. It will match in the order of configuration, and the first match will be finally printed in the access log.
- e.g.
- In the Request Header: X-Request-ID: **test-id-123**
- Configuration in app.ini: REQUEST_ID_HEADERS = X-Request-ID
- Print in log: 127.0.0.1:58384 - - [14/Feb/2023:16:33:51 +0800] "**test-id-123**" ...
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
### Log subsections (`log.name`, `log.name.*`)
- `LEVEL`: **log.LEVEL**: Sets the log-level of this sublogger. Defaults to the `LEVEL` set in the global `[log]` section.
- `STACKTRACE_LEVEL`: **log.STACKTRACE_LEVEL**: Sets the log level at which to log stack traces.
- `MODE`: **name**: Sets the mode of this sublogger - Defaults to the provided subsection name. This allows you to have two different file loggers at different levels.
- `EXPRESSION`: **""**: A regular expression to match either the function name, file or message. Defaults to empty. Only log messages that match the expression will be saved in the logger.
- `FLAGS`: **stdflags**: A comma separated string representing the log flags. Defaults to `stdflags` which represents the prefix: `2009/01/23 01:23:23 ...a/b/c/d.go:23:runtime.Caller() [I]: message`. `none` means don't prefix log lines. See `modules/log/flags.go` for more information.
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- `PREFIX`: **""**: An additional prefix for every log line in this logger. Defaults to empty.
- `COLORIZE`: **false**: Whether to colorize the log lines
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
### Console log mode (`log.console`, `log.console.*`, or `MODE=console`)
- For the console logger `COLORIZE` will default to `true` if not on windows or the terminal is determined to be able to color.
Better logging (#6038) (#6095) * Panic don't fatal on create new logger Fixes #5854 Signed-off-by: Andrew Thornton <art27@cantab.net> * partial broken * Update the logging infrastrcture Signed-off-by: Andrew Thornton <art27@cantab.net> * Reset the skip levels for Fatal and Error Signed-off-by: Andrew Thornton <art27@cantab.net> * broken ncsa * More log.Error fixes Signed-off-by: Andrew Thornton <art27@cantab.net> * Remove nal * set log-levels to lowercase * Make console_test test all levels * switch to lowercased levels * OK now working * Fix vetting issues * Fix lint * Fix tests * change default logging to match current gitea * Improve log testing Signed-off-by: Andrew Thornton <art27@cantab.net> * reset error skip levels to 0 * Update documentation and access logger configuration * Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE * Fix broken level caching * Refactor the router log * Add Router logger * Add colorizing options * Adjust router colors * Only create logger if they will be used * update app.ini.sample * rename Attribute ColorAttribute * Change from white to green for function * Set fatal/error levels * Restore initial trace logger * Fix Trace arguments in modules/auth/auth.go * Properly handle XORMLogger * Improve admin/config page * fix fmt * Add auto-compression of old logs * Update error log levels * Remove the unnecessary skip argument from Error, Fatal and Critical * Add stacktrace support * Fix tests * Remove x/sync from vendors? * Add stderr option to console logger * Use filepath.ToSlash to protect against Windows in tests * Remove prefixed underscores from names in colors.go * Remove not implemented database logger This was removed from Gogs on 4 Mar 2016 but left in the configuration since then. * Ensure that log paths are relative to ROOT_PATH * use path.Join * rename jsonConfig to logConfig * Rename "config" to "jsonConfig" to make it clearer * Requested changes * Requested changes: XormLogger * Try to color the windows terminal If successful default to colorizing the console logs * fixup * Colorize initially too * update vendor * Colorize logs on default and remove if this is not a colorizing logger * Fix documentation * fix test * Use go-isatty to detect if on windows we are on msys or cygwin * Fix spelling mistake * Add missing vendors * More changes * Rationalise the ANSI writer protection * Adjust colors on advice from @0x5c * Make Flags a comma separated list * Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING * Ensure matching is done on the non-colored message - to simpify EXPRESSION
2019-04-02 07:48:31 +00:00
- `STDERR`: **false**: Use Stderr instead of Stdout.
### File log mode (`log.file`, `log.file.*` or `MODE=file`)
- `FILE_NAME`: Set the file name for this logger. Defaults as described above. If relative will be relative to the `ROOT_PATH`
- `LOG_ROTATE`: **true**: Rotate the log files.
- `MAX_SIZE_SHIFT`: **28**: Maximum size shift of a single file, 28 represents 256Mb.
- `DAILY_ROTATE`: **true**: Rotate logs daily.
- `MAX_DAYS`: **7**: Delete the log file after n days
- `COMPRESS`: **true**: Compress old log files by default with gzip
- `COMPRESSION_LEVEL`: **-1**: Compression level
### Conn log mode (`log.conn`, `log.conn.*` or `MODE=conn`)
- `RECONNECT_ON_MSG`: **false**: Reconnect host for every single message.
- `RECONNECT`: **false**: Try to reconnect when connection is lost.
- `PROTOCOL`: **tcp**: Set the protocol, either "tcp", "unix" or "udp".
- `ADDR`: **:7020**: Sets the address to connect to.
### SMTP log mode (`log.smtp`, `log.smtp.*` or `MODE=smtp`)
- `USER`: User email address to send from.
- `PASSWD`: Password for the smtp server.
- `HOST`: **127.0.0.1:25**: The SMTP host to connect to.
- `RECEIVERS`: Email addresses to send to.
- `SUBJECT`: **Diagnostic message from Gitea**
## Cron (`cron`)
- `ENABLED`: **false**: Enable to run all cron tasks periodically with default settings.
- `RUN_AT_START`: **false**: Run cron tasks at application start-up.
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE` accept formats
- Full crontab specs, e.g. `* * * * * ?`
- Descriptors, e.g. `@midnight`, `@every 1h30m` ...
2022-09-25 22:16:46 +00:00
- See more: [cron documentation](https://pkg.go.dev/github.com/gogs/cron@v0.0.0-20171120032916-9f6c956d3e14)
### Basic cron tasks - enabled by default
#### Cron - Cleanup old repository archives (`cron.archive_cleanup`)
- `ENABLED`: **true**: Enable service.
- `RUN_AT_START`: **true**: Run tasks at start up time (if ENABLED).
- `SCHEDULE`: **@midnight**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
- `OLDER_THAN`: **24h**: Archives created more than `OLDER_THAN` ago are subject to deletion, e.g. `12h`.
#### Cron - Update Mirrors (`cron.update_mirrors`)
- `SCHEDULE`: **@every 10m**: Cron syntax for scheduling update mirrors, e.g. `@every 3h`.
- `PULL_LIMIT`: **50**: Limit the number of mirrors added to the queue to this number (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling pull mirror updating).
- `PUSH_LIMIT`: **50**: Limit the number of mirrors added to the queue to this number (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling push mirror updating).
#### Cron - Repository Health Check (`cron.repo_health_check`)
- `SCHEDULE`: **@midnight**: Cron syntax for scheduling repository health check.
- `TIMEOUT`: **60s**: Time duration syntax for health check execution timeout.
- `ARGS`: **\<empty\>**: Arguments for command `git fsck`, e.g. `--unreachable --tags`. See more on http://git-scm.com/docs/git-fsck
#### Cron - Repository Statistics Check (`cron.check_repo_stats`)
- `RUN_AT_START`: **true**: Run repository statistics check at start time.
- `SCHEDULE`: **@midnight**: Cron syntax for scheduling repository statistics check.
Add Package Registry (#16510) * Added package store settings. * Added models. * Added generic package registry. * Added tests. * Added NuGet package registry. * Moved service index to api file. * Added NPM package registry. * Added Maven package registry. * Added PyPI package registry. * Summary is deprecated. * Changed npm name. * Sanitize project url. * Allow only scoped packages. * Added user interface. * Changed method name. * Added missing migration file. * Set page info. * Added documentation. * Added documentation links. * Fixed wrong error message. * Lint template files. * Fixed merge errors. * Fixed unit test storage path. * Switch to json module. * Added suggestions. * Added package webhook. * Add package api. * Fixed swagger file. * Fixed enum and comments. * Fixed NuGet pagination. * Print test names. * Added api tests. * Fixed access level. * Fix User unmarshal. * Added RubyGems package registry. * Fix lint. * Implemented io.Writer. * Added support for sha256/sha512 checksum files. * Improved maven-metadata.xml support. * Added support for symbol package uploads. * Added tests. * Added overview docs. * Added npm dependencies and keywords. * Added no-packages information. * Display file size. * Display asset count. * Fixed filter alignment. * Added package icons. * Formatted instructions. * Allow anonymous package downloads. * Fixed comments. * Fixed postgres test. * Moved file. * Moved models to models/packages. * Use correct error response format per client. * Use simpler search form. * Fixed IsProd. * Restructured data model. * Prevent empty filename. * Fix swagger. * Implemented user/org registry. * Implemented UI. * Use GetUserByIDCtx. * Use table for dependencies. * make svg * Added support for unscoped npm packages. * Add support for npm dist tags. * Added tests for npm tags. * Unlink packages if repository gets deleted. * Prevent user/org delete if a packages exist. * Use package unlink in repository service. * Added support for composer packages. * Restructured package docs. * Added missing tests. * Fixed generic content page. * Fixed docs. * Fixed swagger. * Added missing type. * Fixed ambiguous column. * Organize content store by sha256 hash. * Added admin package management. * Added support for sorting. * Add support for multiple identical versions/files. * Added missing repository unlink. * Added file properties. * make fmt * lint * Added Conan package registry. * Updated docs. * Unify package names. * Added swagger enum. * Use longer TEXT column type. * Removed version composite key. * Merged package and container registry. * Removed index. * Use dedicated package router. * Moved files to new location. * Updated docs. * Fixed JOIN order. * Fixed GROUP BY statement. * Fixed GROUP BY #2. * Added symbol server support. * Added more tests. * Set NOT NULL. * Added setting to disable package registries. * Moved auth into service. * refactor * Use ctx everywhere. * Added package cleanup task. * Changed packages path. * Added container registry. * Refactoring * Updated comparison. * Fix swagger. * Fixed table order. * Use token auth for npm routes. * Enabled ReverseProxy auth. * Added packages link for orgs. * Fixed anonymous org access. * Enable copy button for setup instructions. * Merge error * Added suggestions. * Fixed merge. * Handle "generic". * Added link for TODO. * Added suggestions. * Changed temporary buffer filename. * Added suggestions. * Apply suggestions from code review Co-authored-by: Thomas Boerger <thomas@webhippie.de> * Update docs/content/doc/packages/nuget.en-us.md Co-authored-by: wxiaoguang <wxiaoguang@gmail.com> Co-authored-by: Thomas Boerger <thomas@webhippie.de>
2022-03-30 08:42:47 +00:00
#### Cron - Cleanup hook_task Table (`cron.cleanup_hook_task_table`)
- `ENABLED`: **true**: Enable cleanup hook_task job.
- `RUN_AT_START`: **false**: Run cleanup hook_task at start time (if ENABLED).
- `SCHEDULE`: **@midnight**: Cron syntax for cleaning hook_task table.
- `CLEANUP_TYPE` **OlderThan** OlderThan or PerWebhook Method to cleanup hook_task, either by age (i.e. how long ago hook_task record was delivered) or by the number to keep per webhook (i.e. keep most recent x deliveries per webhook).
- `OLDER_THAN`: **168h**: If CLEANUP_TYPE is set to OlderThan, then any delivered hook_task records older than this expression will be deleted.
- `NUMBER_TO_KEEP`: **10**: If CLEANUP_TYPE is set to PerWebhook, this is number of hook_task records to keep for a webhook (i.e. keep the most recent x deliveries).
Add Package Registry (#16510) * Added package store settings. * Added models. * Added generic package registry. * Added tests. * Added NuGet package registry. * Moved service index to api file. * Added NPM package registry. * Added Maven package registry. * Added PyPI package registry. * Summary is deprecated. * Changed npm name. * Sanitize project url. * Allow only scoped packages. * Added user interface. * Changed method name. * Added missing migration file. * Set page info. * Added documentation. * Added documentation links. * Fixed wrong error message. * Lint template files. * Fixed merge errors. * Fixed unit test storage path. * Switch to json module. * Added suggestions. * Added package webhook. * Add package api. * Fixed swagger file. * Fixed enum and comments. * Fixed NuGet pagination. * Print test names. * Added api tests. * Fixed access level. * Fix User unmarshal. * Added RubyGems package registry. * Fix lint. * Implemented io.Writer. * Added support for sha256/sha512 checksum files. * Improved maven-metadata.xml support. * Added support for symbol package uploads. * Added tests. * Added overview docs. * Added npm dependencies and keywords. * Added no-packages information. * Display file size. * Display asset count. * Fixed filter alignment. * Added package icons. * Formatted instructions. * Allow anonymous package downloads. * Fixed comments. * Fixed postgres test. * Moved file. * Moved models to models/packages. * Use correct error response format per client. * Use simpler search form. * Fixed IsProd. * Restructured data model. * Prevent empty filename. * Fix swagger. * Implemented user/org registry. * Implemented UI. * Use GetUserByIDCtx. * Use table for dependencies. * make svg * Added support for unscoped npm packages. * Add support for npm dist tags. * Added tests for npm tags. * Unlink packages if repository gets deleted. * Prevent user/org delete if a packages exist. * Use package unlink in repository service. * Added support for composer packages. * Restructured package docs. * Added missing tests. * Fixed generic content page. * Fixed docs. * Fixed swagger. * Added missing type. * Fixed ambiguous column. * Organize content store by sha256 hash. * Added admin package management. * Added support for sorting. * Add support for multiple identical versions/files. * Added missing repository unlink. * Added file properties. * make fmt * lint * Added Conan package registry. * Updated docs. * Unify package names. * Added swagger enum. * Use longer TEXT column type. * Removed version composite key. * Merged package and container registry. * Removed index. * Use dedicated package router. * Moved files to new location. * Updated docs. * Fixed JOIN order. * Fixed GROUP BY statement. * Fixed GROUP BY #2. * Added symbol server support. * Added more tests. * Set NOT NULL. * Added setting to disable package registries. * Moved auth into service. * refactor * Use ctx everywhere. * Added package cleanup task. * Changed packages path. * Added container registry. * Refactoring * Updated comparison. * Fix swagger. * Fixed table order. * Use token auth for npm routes. * Enabled ReverseProxy auth. * Added packages link for orgs. * Fixed anonymous org access. * Enable copy button for setup instructions. * Merge error * Added suggestions. * Fixed merge. * Handle "generic". * Added link for TODO. * Added suggestions. * Changed temporary buffer filename. * Added suggestions. * Apply suggestions from code review Co-authored-by: Thomas Boerger <thomas@webhippie.de> * Update docs/content/doc/packages/nuget.en-us.md Co-authored-by: wxiaoguang <wxiaoguang@gmail.com> Co-authored-by: Thomas Boerger <thomas@webhippie.de>
2022-03-30 08:42:47 +00:00
#### Cron - Cleanup expired packages (`cron.cleanup_packages`)
- `ENABLED`: **true**: Enable cleanup expired packages job.
- `RUN_AT_START`: **true**: Run job at start time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Notify every time this job runs.
- `SCHEDULE`: **@midnight**: Cron syntax for the job.
- `OLDER_THAN`: **24h**: Unreferenced package data created more than OLDER_THAN ago is subject to deletion.
#### Cron - Update Migration Poster ID (`cron.update_migration_poster_id`)
- `SCHEDULE`: **@midnight** : Interval as a duration between each synchronization, it will always attempt synchronization when the instance starts.
#### Cron - Sync External Users (`cron.sync_external_users`)
- `SCHEDULE`: **@midnight** : Interval as a duration between each synchronization, it will always attempt synchronization when the instance starts.
- `UPDATE_EXISTING`: **true**: Create new users, update existing user data and disable users that are not in external source anymore (default) or only create new users if UPDATE_EXISTING is set to false.
### Extended cron tasks (not enabled by default)
#### Cron - Garbage collect all repositories ('cron.git_gc_repos')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
- `TIMEOUT`: **60s**: Time duration syntax for garbage collection execution timeout.
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `ARGS`: **\<empty\>**: Arguments for command `git gc`, e.g. `--aggressive --auto`. The default value is same with [git] -> GC_ARGS
#### Cron - Update the '.ssh/authorized_keys' file with Gitea SSH keys ('cron.resync_all_sshkeys')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Resynchronize pre-receive, update and post-receive hooks of all repositories ('cron.resync_all_hooks')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Reinitialize all missing Git repositories for which records exist ('cron.reinit_missing_repos')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Delete all repositories missing their Git files ('cron.delete_missing_repos')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Delete generated repository avatars ('cron.delete_generated_repository_avatars')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Delete all old actions from database ('cron.delete_old_actions')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
- `SCHEDULE`: **@every 168h**: Cron syntax to set how often to check.
- `OLDER_THAN`: **@every 8760h**: any action older than this expression will be deleted from database, suggest using `8760h` (1 year) because that's the max length of heatmap.
#### Cron - Check for new Gitea versions ('cron.update_checker')
- `ENABLED`: **true**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `ENABLE_SUCCESS_NOTICE`: **true**: Set to false to switch off success notices.
- `SCHEDULE`: **@every 168h**: Cron syntax for scheduling a work, e.g. `@every 168h`.
- `HTTP_ENDPOINT`: **https://dl.gitea.io/gitea/version.json**: the endpoint that Gitea will check for newer versions
#### Cron - Delete all old system notices from database ('cron.delete_old_system_notices')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `NO_SUCCESS_NOTICE`: **false**: Set to true to switch off success notices.
- `SCHEDULE`: **@every 168h**: Cron syntax to set how often to check.
- `OLDER_THAN`: **@every 8760h**: any system notice older than this expression will be deleted from database.
#### Cron - Garbage collect LFS pointers in repositories ('cron.gc_lfs')
- `ENABLED`: **false**: Enable service.
- `RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
- `SCHEDULE`: **@every 24h**: Cron syntax to set how often to check.
- `OLDER_THAN`: **168h**: Only attempt to garbage collect LFSMetaObjects older than this (default 7 days)
- `LAST_UPDATED_MORE_THAN_AGO`: **72h**: Only attempt to garbage collect LFSMetaObjects that have not been attempted to be garbage collected for this long (default 3 days)
- `NUMBER_TO_CHECK_PER_REPO`: **100**: Minimum number of stale LFSMetaObjects to check per repo. Set to `0` to always check all.
- `PROPORTION_TO_CHECK_PER_REPO`: **0.6**: Check at least this proportion of LFSMetaObjects per repo. (This may cause all stale LFSMetaObjects to be checked.)
## Git (`git`)
- `PATH`: **""**: The path of Git executable. If empty, Gitea searches through the PATH environment.
- `HOME_PATH`: **%(APP_DATA_PATH)s/home**: The HOME directory for Git.
This directory will be used to contain the `.gitconfig` and possible `.gnupg` directories that Gitea's git calls will use. If you can confirm Gitea is the only application running in this environment, you can set it to the normal home directory for Gitea user.
- `DISABLE_DIFF_HIGHLIGHT`: **false**: Disables highlight of added and removed changes.
- `MAX_GIT_DIFF_LINES`: **1000**: Max number of lines allowed of a single file in diff view.
- `MAX_GIT_DIFF_LINE_CHARACTERS`: **5000**: Max character count per line highlighted in diff view.
- `MAX_GIT_DIFF_FILES`: **100**: Max number of files shown in diff view.
- `COMMITS_RANGE_SIZE`: **50**: Set the default commits range size
- `BRANCHES_RANGE_SIZE`: **20**: Set the default branches range size
- `GC_ARGS`: **\<empty\>**: Arguments for command `git gc`, e.g. `--aggressive --auto`. See more on http://git-scm.com/docs/git-gc/
- `ENABLE_AUTO_GIT_WIRE_PROTOCOL`: **true**: If use Git wire protocol version 2 when Git version >= 2.18, default is true, set to false when you always want Git wire protocol version 1.
To enable this for Git over SSH when using a OpenSSH server, add `AcceptEnv GIT_PROTOCOL` to your sshd_config file.
- `PULL_REQUEST_PUSH_MESSAGE`: **true**: Respond to pushes to a non-default branch with a URL for creating a Pull Request (if the repository has them enabled)
- `VERBOSE_PUSH`: **true**: Print status information about pushes as they are being processed.
- `VERBOSE_PUSH_DELAY`: **5s**: Only print verbose information if push takes longer than this delay.
- `LARGE_OBJECT_THRESHOLD`: **1048576**: (Go-Git only), don't cache objects greater than this in memory. (Set to 0 to disable.)
- `DISABLE_CORE_PROTECT_NTFS`: **false** Set to true to forcibly set `core.protectNTFS` to false.
- `DISABLE_PARTIAL_CLONE`: **false** Disable the usage of using partial clones for git.
2018-07-06 05:49:37 +00:00
## Git - Timeout settings (`git.timeout`)
2023-01-10 21:00:42 +00:00
- `DEFAULT`: **360**: Git operations default timeout seconds.
2018-07-06 05:49:37 +00:00
- `MIGRATE`: **600**: Migrate external repositories timeout seconds.
- `MIRROR`: **300**: Mirror external repositories timeout seconds.
- `CLONE`: **300**: Git clone from internal repositories timeout seconds.
- `PULL`: **300**: Git pull from internal repositories timeout seconds.
- `GC`: **60**: Git repository GC timeout seconds.
## Metrics (`metrics`)
- `ENABLED`: **false**: Enables /metrics endpoint for prometheus.
- `ENABLED_ISSUE_BY_LABEL`: **false**: Enable issue by label metrics with format `gitea_issues_by_label{label="bug"} 2`.
- `ENABLED_ISSUE_BY_REPOSITORY`: **false**: Enable issue by repository metrics with format `gitea_issues_by_repository{repository="org/repo"} 5`.
- `TOKEN`: **\<empty\>**: You need to specify the token, if you want to include in the authorization the metrics . The same token need to be used in prometheus parameters `bearer_token` or `bearer_token_file`.
## API (`api`)
- `ENABLE_SWAGGER`: **true**: Enables the API documentation endpoints (`/api/swagger`, `/api/v1/swagger`, …). True or false.
- `MAX_RESPONSE_ITEMS`: **50**: Max number of items in a page.
- `DEFAULT_PAGING_NUM`: **30**: Default paging number of API.
- `DEFAULT_GIT_TREES_PER_PAGE`: **1000**: Default and maximum number of items per page for Git trees API.
- `DEFAULT_MAX_BLOB_SIZE`: **10485760** (10MiB): Default max size of a blob that can be returned by the blobs API.
2019-03-08 16:42:50 +00:00
## OAuth2 (`oauth2`)
- `ENABLE`: **true**: Enables OAuth2 provider.
2019-03-08 16:42:50 +00:00
- `ACCESS_TOKEN_EXPIRATION_TIME`: **3600**: Lifetime of an OAuth2 access token in seconds
- `REFRESH_TOKEN_EXPIRATION_TIME`: **730**: Lifetime of an OAuth2 refresh token in hours
- `INVALIDATE_REFRESH_TOKENS`: **false**: Check if refresh token has already been used
- `JWT_SIGNING_ALGORITHM`: **RS256**: Algorithm used to sign OAuth2 tokens. Valid values: \[`HS256`, `HS384`, `HS512`, `RS256`, `RS384`, `RS512`, `ES256`, `ES384`, `ES512`\]
- `JWT_SECRET`: **\<empty\>**: OAuth2 authentication secret for access and refresh tokens, change this to a unique string. This setting is only needed if `JWT_SIGNING_ALGORITHM` is set to `HS256`, `HS384` or `HS512`.
- `JWT_SIGNING_PRIVATE_KEY_FILE`: **jwt/private.pem**: Private key file path used to sign OAuth2 tokens. The path is relative to `APP_DATA_PATH`. This setting is only needed if `JWT_SIGNING_ALGORITHM` is set to `RS256`, `RS384`, `RS512`, `ES256`, `ES384` or `ES512`. The file must contain a RSA or ECDSA private key in the PKCS8 format. If no key exists a 4096 bit key will be created for you.
- `MAX_TOKEN_LENGTH`: **32767**: Maximum length of token/cookie to accept from OAuth2 provider
2019-03-08 16:42:50 +00:00
## i18n (`i18n`)
- `LANGS`: **en-US,zh-CN,zh-HK,zh-TW,de-DE,fr-FR,nl-NL,lv-LV,ru-RU,uk-UA,ja-JP,es-ES,pt-BR,pt-PT,pl-PL,bg-BG,it-IT,fi-FI,tr-TR,cs-CZ,sv-SE,ko-KR,el-GR,fa-IR,hu-HU,id-ID,ml-IN**:
List of locales shown in language selector. The first locale will be used as the default if user browser's language doesn't match any locale in the list.
- `NAMES`: **English,简体中文,繁體中文(香港),繁體中文(台灣),Deutsch,Français,Nederlands,Latviešu,Русский,Українська,日本語,Español,Português do Brasil,Português de Portugal,Polski,Български,Italiano,Suomi,Türkçe,Čeština,Српски,Svenska,한국어,Ελληνικά,فارسی,Magyar nyelv,Bahasa Indonesia,മലയാളം**: Visible names corresponding to the locales
## Markup (`markup`)
2018-01-06 11:28:31 +00:00
- `MERMAID_MAX_SOURCE_CHARACTERS`: **5000**: Set the maximum size of a Mermaid source. (Set to -1 to disable)
Gitea can support Markup using external tools. The example below will add a markup named `asciidoc`.
2018-01-06 11:28:31 +00:00
```ini
[markup.asciidoc]
ENABLED = true
NEED_POSTPROCESS = true
2018-01-06 11:28:31 +00:00
FILE_EXTENSIONS = .adoc,.asciidoc
RENDER_COMMAND = "asciidoc --out-file=- -"
IS_INPUT_FILE = false
```
- ENABLED: **false** Enable markup support; set to **true** to enable this renderer.
- NEED\_POSTPROCESS: **true** set to **true** to replace links / sha1 and etc.
- FILE\_EXTENSIONS: **\<empty\>** List of file extensions that should be rendered by an external
command. Multiple extensions needs a comma as splitter.
- RENDER\_COMMAND: External command to render all matching extensions.
- IS\_INPUT\_FILE: **false** Input is not a standard input but a file param followed `RENDER_COMMAND`.
- RENDER_CONTENT_MODE: **sanitized** How the content will be rendered.
- sanitized: Sanitize the content and render it inside current page, default to only allow a few HTML tags and attributes. Customized sanitizer rules can be defined in `[markup.sanitizer.*]`.
- no-sanitizer: Disable the sanitizer and render the content inside current page. It's **insecure** and may lead to XSS attack if the content contains malicious code.
- iframe: Render the content in a separate standalone page and embed it into current page by iframe. The iframe is in sandbox mode with same-origin disabled, and the JS code are safely isolated from parent page.
2018-01-06 11:28:31 +00:00
Two special environment variables are passed to the render command:
- `GITEA_PREFIX_SRC`, which contains the current URL prefix in the `src` path tree. To be used as prefix for links.
- `GITEA_PREFIX_RAW`, which contains the current URL prefix in the `raw` path tree. To be used as prefix for image paths.
If `RENDER_CONTENT_MODE` is `sanitized`, Gitea supports customizing the sanitization policy for rendered HTML. The example below will support KaTeX output from pandoc.
```ini
[markup.sanitizer.TeX]
; Pandoc renders TeX segments as <span>s with the "math" class, optionally
; with "inline" or "display" classes depending on context.
ELEMENT = span
ALLOW_ATTR = class
REGEXP = ^\s*((math(\s+|$)|inline(\s+|$)|display(\s+|$)))+
ALLOW_DATA_URI_IMAGES = true
```
- `ELEMENT`: The element this policy applies to. Must be non-empty.
- `ALLOW_ATTR`: The attribute this policy allows. Must be non-empty.
- `REGEXP`: A regex to match the contents of the attribute against. Must be present but may be empty for unconditional whitelisting of this attribute.
- `ALLOW_DATA_URI_IMAGES`: **false** Allow data uri images (`<img src="data:image/png;base64,..."/>`).
Multiple sanitisation rules can be defined by adding unique subsections, e.g. `[markup.sanitizer.TeX-2]`.
To apply a sanitisation rules only for a specify external renderer they must use the renderer name, e.g. `[markup.sanitizer.asciidoc.rule-1]`.
If the rule is defined above the renderer ini section or the name does not match a renderer it is applied to every renderer.
## Highlight Mappings (`highlight.mapping`)
- `file_extension e.g. .toml`: **language e.g. ini**. File extension to language mapping overrides.
- Gitea will highlight files using the `linguist-language` or `gitlab-language` attribute from the `.gitattributes` file
if available. If this is not set or the language is unavailable, the file extension will be looked up
in this mapping or the filetype using heuristics.
## Time (`time`)
2019-10-13 13:23:14 +00:00
- `FORMAT`: Time format to display on UI. i.e. RFC1123 or 2006-01-02 15:04:05
- `DEFAULT_UI_LOCATION`: Default location of time on the UI, so that we can display correct user's time on UI. i.e. Asia/Shanghai
2019-10-13 13:23:14 +00:00
## Task (`task`)
Task queue configuration has been moved to `queue.task`. However, the below configuration values are kept for backwards compatibility:
2019-10-13 13:23:14 +00:00
- `QUEUE_TYPE`: **channel**: Task queue type, could be `channel` or `redis`.
- `QUEUE_LENGTH`: **1000**: Task queue length, available only when `QUEUE_TYPE` is `channel`.
- `QUEUE_CONN_STR`: **redis://127.0.0.1:6379/0**: Task queue connection string, available only when `QUEUE_TYPE` is `redis`. If redis needs a password, use `redis://123@127.0.0.1:6379/0`.
2019-10-13 13:23:14 +00:00
## Migrations (`migrations`)
- `MAX_ATTEMPTS`: **3**: Max attempts per http/https request on migrations.
- `RETRY_BACKOFF`: **3**: Backoff time per http/https request retry (seconds)
- `ALLOWED_DOMAINS`: **\<empty\>**: Domains allowlist for migrating repositories, default is blank. It means everything will be allowed. Multiple domains could be separated by commas. Wildcard is supported: `github.com, *.github.com`.
- `BLOCKED_DOMAINS`: **\<empty\>**: Domains blocklist for migrating repositories, default is blank. Multiple domains could be separated by commas. When `ALLOWED_DOMAINS` is not blank, this option has a higher priority to deny domains. Wildcard is supported.
- `ALLOW_LOCALNETWORKS`: **false**: Allow private addresses defined by RFC 1918, RFC 1122, RFC 4632 and RFC 4291. If a domain is allowed by `ALLOWED_DOMAINS`, this option will be ignored.
- `SKIP_TLS_VERIFY`: **false**: Allow skip tls verify
## Federation (`federation`)
2022-06-19 23:48:17 +00:00
- `ENABLED`: **false**: Enable/Disable federation capabilities
- `SHARE_USER_STATISTICS`: **true**: Enable/Disable user statistics for nodeinfo if federation is enabled
User keypairs and HTTP signatures for ActivityPub federation using go-ap (#19133) * go.mod: add go-fed/{httpsig,activity/pub,activity/streams} dependency go get github.com/go-fed/activity/streams@master go get github.com/go-fed/activity/pub@master go get github.com/go-fed/httpsig@master * activitypub: implement /api/v1/activitypub/user/{username} (#14186) Return informations regarding a Person (as defined in ActivityStreams https://www.w3.org/TR/activitystreams-vocabulary/#dfn-person). Refs: https://github.com/go-gitea/gitea/issues/14186 Signed-off-by: Loïc Dachary <loic@dachary.org> * activitypub: add the public key to Person (#14186) Refs: https://github.com/go-gitea/gitea/issues/14186 Signed-off-by: Loïc Dachary <loic@dachary.org> * activitypub: go-fed conformant Clock instance Signed-off-by: Loïc Dachary <loic@dachary.org> * activitypub: signing http client Signed-off-by: Loïc Dachary <loic@dachary.org> * activitypub: implement the ReqSignature middleware Signed-off-by: Loïc Dachary <loic@dachary.org> * activitypub: hack_16834 Signed-off-by: Loïc Dachary <loic@dachary.org> * Fix CI checks-backend errors with go mod tidy Signed-off-by: Anthony Wang <ta180m@pm.me> * Change 2021 to 2022, properly format package imports Signed-off-by: Anthony Wang <ta180m@pm.me> * Run make fmt and make generate-swagger Signed-off-by: Anthony Wang <ta180m@pm.me> * Use Gitea JSON library, add assert for pkp Signed-off-by: Anthony Wang <ta180m@pm.me> * Run make fmt again, fix err var redeclaration Signed-off-by: Anthony Wang <ta180m@pm.me> * Remove LogSQL from ActivityPub person test Signed-off-by: Anthony Wang <ta180m@pm.me> * Assert if json.Unmarshal succeeds Signed-off-by: Anthony Wang <ta180m@pm.me> * Cleanup, handle invalid usernames for ActivityPub person GET request Signed-off-by: Anthony Wang <ta180m@pm.me> * Rename hack_16834 to user_settings Signed-off-by: Anthony Wang <ta180m@pm.me> * Use the httplib module instead of http for GET requests * Clean up whitespace with make fmt * Use time.RFC1123 and make the http.Client proxy-aware * Check if digest algo is supported in setting module * Clean up some variable declarations * Remove unneeded copy * Use system timezone instead of setting.DefaultUILocation * Use named constant for httpsigExpirationTime * Make pubKey IRI #main-key instead of /#main-key * Move /#main-key to #main-key in tests * Implemented Webfinger endpoint. * Add visible check. * Add user profile as alias. * Add actor IRI and remote interaction URL to WebFinger response * fmt * Fix lint errors * Use go-ap instead of go-fed * Run go mod tidy to fix missing modules in go.mod and go.sum * make fmt * Convert remaining code to go-ap * Clean up go.sum * Fix JSON unmarshall error * Fix CI errors by adding @context to Person() and making sure types match * Correctly decode JSON in api_activitypub_person_test.go * Force CI rerun * Fix TestActivityPubPersonInbox segfault * Fix lint error * Use @mariusor's suggestions for idiomatic go-ap usage * Correctly add inbox/outbox IRIs to person * Code cleanup * Remove another LogSQL from ActivityPub person test * Move httpsig algos slice to an init() function * Add actor IRI and remote interaction URL to WebFinger response * Update TestWebFinger to check for ActivityPub IRI in aliases * make fmt * Force CI rerun * WebFinger: Add CORS header and fix Href -> Template for remote interactions The CORS header is needed due to https://datatracker.ietf.org/doc/html/rfc7033#section-5 and fixes some Peertube <-> Gitea federation issues * make lint-backend * Make sure Person endpoint has Content-Type application/activity+json and includes PreferredUsername, URL, and Icon Setting the correct Content-Type is essential for federating with Mastodon * Use UTC instead of GMT * Rename pkey to pubKey * Make sure HTTP request Date in GMT * make fmt * dont drop err * Make sure API responses always refer to username in original case Copied from what I wrote on #19133 discussion: Handling username case is a very tricky issue and I've already encountered a Mastodon <-> Gitea federation bug due to Gitea considering Ta180m and ta180m to be the same user while Mastodon thinks they are two different users. I think the best way forward is for Gitea to only use the original case version of the username for federation so other AP software don't get confused. * Move httpsig algs constant slice to modules/setting/federation.go * Add new federation settings to app.example.ini and config-cheat-sheet * Return if marshalling error * Make sure Person IRIs are generated correctly This commit ensures that if the setting.AppURL is something like "http://127.0.0.1:42567" (like in the integration tests), a trailing slash will be added after that URL. * If httpsig verification fails, fix Host header and try again This fixes a very rare bug when Gitea and another AP server (confirmed to happen with Mastodon) are running on the same machine, Gitea fails to verify incoming HTTP signatures. This is because the other AP server creates the sig with the public Gitea domain as the Host. However, when Gitea receives the request, the Host header is instead localhost, so the signature verification fails. Manually changing the host header to the correct value and trying the veification again fixes the bug. * Revert "If httpsig verification fails, fix Host header and try again" This reverts commit f53e46c721a037c55facb9200106a6b491bf834c. The bug was actually caused by nginx messing up the Host header when reverse-proxying since I didn't have the line `proxy_set_header Host $host;` in my nginx config for Gitea. * Go back to using ap.IRI to generate inbox and outbox IRIs * use const for key values * Update routers/web/webfinger.go * Use ctx.JSON in Person response to make code cleaner * Revert "Use ctx.JSON in Person response to make code cleaner" This doesn't work because the ctx.JSON() function already sends the response out and it's too late to edit the headers. This reverts commit 95aad988975be3393c76094864ed6ba962157e0c. * Use activitypub.ActivityStreamsContentType for Person response Content Type * Limit maximum ActivityPub request and response sizes to a configurable setting * Move setting key constants to models/user/setting_keys.go * Fix failing ActivityPubPerson integration test by checking the correct field for username * Add a warning about changing settings that can break federation * Add better comments * Don't multiply Federation.MaxSize by 1<<20 twice * Add more better comments * Fix failing ActivityPubMissingPerson test We now use ctx.ContextUser so the message printed out when a user does not exist is slightly different * make generate-swagger For some reason I didn't realize that /templates/swagger/v1_json.tmpl was machine-generated by make generate-swagger... I've been editing it by hand for three months! 🤦 * Move getting the RFC 2616 time to a separate function * More code cleanup * Update go-ap to fix empty liked collection and removed unneeded HTTP headers * go mod tidy * Add ed25519 to httpsig algorithms * Use go-ap/jsonld to add @context and marshal JSON * Change Gitea user agent from the default to Gitea/Version * Use ctx.ServerError and remove all remote interaction code from webfinger.go
2022-06-19 05:25:12 +00:00
- `MAX_SIZE`: **4**: Maximum federation request and response size (MB)
WARNING: Changing the settings below can break federation.
- `ALGORITHMS`: **rsa-sha256, rsa-sha512, ed25519**: HTTP signature algorithms
- `DIGEST_ALGORITHM`: **SHA-256**: HTTP signature digest algorithm
- `GET_HEADERS`: **(request-target), Date**: GET headers for federation requests
- `POST_HEADERS`: **(request-target), Date, Digest**: POST headers for federation requests
Add Package Registry (#16510) * Added package store settings. * Added models. * Added generic package registry. * Added tests. * Added NuGet package registry. * Moved service index to api file. * Added NPM package registry. * Added Maven package registry. * Added PyPI package registry. * Summary is deprecated. * Changed npm name. * Sanitize project url. * Allow only scoped packages. * Added user interface. * Changed method name. * Added missing migration file. * Set page info. * Added documentation. * Added documentation links. * Fixed wrong error message. * Lint template files. * Fixed merge errors. * Fixed unit test storage path. * Switch to json module. * Added suggestions. * Added package webhook. * Add package api. * Fixed swagger file. * Fixed enum and comments. * Fixed NuGet pagination. * Print test names. * Added api tests. * Fixed access level. * Fix User unmarshal. * Added RubyGems package registry. * Fix lint. * Implemented io.Writer. * Added support for sha256/sha512 checksum files. * Improved maven-metadata.xml support. * Added support for symbol package uploads. * Added tests. * Added overview docs. * Added npm dependencies and keywords. * Added no-packages information. * Display file size. * Display asset count. * Fixed filter alignment. * Added package icons. * Formatted instructions. * Allow anonymous package downloads. * Fixed comments. * Fixed postgres test. * Moved file. * Moved models to models/packages. * Use correct error response format per client. * Use simpler search form. * Fixed IsProd. * Restructured data model. * Prevent empty filename. * Fix swagger. * Implemented user/org registry. * Implemented UI. * Use GetUserByIDCtx. * Use table for dependencies. * make svg * Added support for unscoped npm packages. * Add support for npm dist tags. * Added tests for npm tags. * Unlink packages if repository gets deleted. * Prevent user/org delete if a packages exist. * Use package unlink in repository service. * Added support for composer packages. * Restructured package docs. * Added missing tests. * Fixed generic content page. * Fixed docs. * Fixed swagger. * Added missing type. * Fixed ambiguous column. * Organize content store by sha256 hash. * Added admin package management. * Added support for sorting. * Add support for multiple identical versions/files. * Added missing repository unlink. * Added file properties. * make fmt * lint * Added Conan package registry. * Updated docs. * Unify package names. * Added swagger enum. * Use longer TEXT column type. * Removed version composite key. * Merged package and container registry. * Removed index. * Use dedicated package router. * Moved files to new location. * Updated docs. * Fixed JOIN order. * Fixed GROUP BY statement. * Fixed GROUP BY #2. * Added symbol server support. * Added more tests. * Set NOT NULL. * Added setting to disable package registries. * Moved auth into service. * refactor * Use ctx everywhere. * Added package cleanup task. * Changed packages path. * Added container registry. * Refactoring * Updated comparison. * Fix swagger. * Fixed table order. * Use token auth for npm routes. * Enabled ReverseProxy auth. * Added packages link for orgs. * Fixed anonymous org access. * Enable copy button for setup instructions. * Merge error * Added suggestions. * Fixed merge. * Handle "generic". * Added link for TODO. * Added suggestions. * Changed temporary buffer filename. * Added suggestions. * Apply suggestions from code review Co-authored-by: Thomas Boerger <thomas@webhippie.de> * Update docs/content/doc/packages/nuget.en-us.md Co-authored-by: wxiaoguang <wxiaoguang@gmail.com> Co-authored-by: Thomas Boerger <thomas@webhippie.de>
2022-03-30 08:42:47 +00:00
## Packages (`packages`)
- `ENABLED`: **true**: Enable/Disable package registry capabilities
- `CHUNKED_UPLOAD_PATH`: **tmp/package-upload**: Path for chunked uploads. Defaults to `APP_DATA_PATH` + `tmp/package-upload`
2022-11-30 00:41:29 +00:00
- `LIMIT_TOTAL_OWNER_COUNT`: **-1**: Maximum count of package versions a single owner can have (`-1` means no limits)
- `LIMIT_TOTAL_OWNER_SIZE`: **-1**: Maximum size of packages a single owner can use (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_CARGO`: **-1**: Maximum size of a Cargo upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_CHEF`: **-1**: Maximum size of a Chef upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
2022-11-30 00:41:29 +00:00
- `LIMIT_SIZE_COMPOSER`: **-1**: Maximum size of a Composer upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_CONAN`: **-1**: Maximum size of a Conan upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_CONDA`: **-1**: Maximum size of a Conda upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
2022-11-30 00:41:29 +00:00
- `LIMIT_SIZE_CONTAINER`: **-1**: Maximum size of a Container upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_GENERIC`: **-1**: Maximum size of a Generic upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_HELM`: **-1**: Maximum size of a Helm upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_MAVEN`: **-1**: Maximum size of a Maven upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_NPM`: **-1**: Maximum size of a npm upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_NUGET`: **-1**: Maximum size of a NuGet upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_PUB`: **-1**: Maximum size of a Pub upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_PYPI`: **-1**: Maximum size of a PyPI upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_RUBYGEMS`: **-1**: Maximum size of a RubyGems upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
- `LIMIT_SIZE_VAGRANT`: **-1**: Maximum size of a Vagrant upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
Add Package Registry (#16510) * Added package store settings. * Added models. * Added generic package registry. * Added tests. * Added NuGet package registry. * Moved service index to api file. * Added NPM package registry. * Added Maven package registry. * Added PyPI package registry. * Summary is deprecated. * Changed npm name. * Sanitize project url. * Allow only scoped packages. * Added user interface. * Changed method name. * Added missing migration file. * Set page info. * Added documentation. * Added documentation links. * Fixed wrong error message. * Lint template files. * Fixed merge errors. * Fixed unit test storage path. * Switch to json module. * Added suggestions. * Added package webhook. * Add package api. * Fixed swagger file. * Fixed enum and comments. * Fixed NuGet pagination. * Print test names. * Added api tests. * Fixed access level. * Fix User unmarshal. * Added RubyGems package registry. * Fix lint. * Implemented io.Writer. * Added support for sha256/sha512 checksum files. * Improved maven-metadata.xml support. * Added support for symbol package uploads. * Added tests. * Added overview docs. * Added npm dependencies and keywords. * Added no-packages information. * Display file size. * Display asset count. * Fixed filter alignment. * Added package icons. * Formatted instructions. * Allow anonymous package downloads. * Fixed comments. * Fixed postgres test. * Moved file. * Moved models to models/packages. * Use correct error response format per client. * Use simpler search form. * Fixed IsProd. * Restructured data model. * Prevent empty filename. * Fix swagger. * Implemented user/org registry. * Implemented UI. * Use GetUserByIDCtx. * Use table for dependencies. * make svg * Added support for unscoped npm packages. * Add support for npm dist tags. * Added tests for npm tags. * Unlink packages if repository gets deleted. * Prevent user/org delete if a packages exist. * Use package unlink in repository service. * Added support for composer packages. * Restructured package docs. * Added missing tests. * Fixed generic content page. * Fixed docs. * Fixed swagger. * Added missing type. * Fixed ambiguous column. * Organize content store by sha256 hash. * Added admin package management. * Added support for sorting. * Add support for multiple identical versions/files. * Added missing repository unlink. * Added file properties. * make fmt * lint * Added Conan package registry. * Updated docs. * Unify package names. * Added swagger enum. * Use longer TEXT column type. * Removed version composite key. * Merged package and container registry. * Removed index. * Use dedicated package router. * Moved files to new location. * Updated docs. * Fixed JOIN order. * Fixed GROUP BY statement. * Fixed GROUP BY #2. * Added symbol server support. * Added more tests. * Set NOT NULL. * Added setting to disable package registries. * Moved auth into service. * refactor * Use ctx everywhere. * Added package cleanup task. * Changed packages path. * Added container registry. * Refactoring * Updated comparison. * Fix swagger. * Fixed table order. * Use token auth for npm routes. * Enabled ReverseProxy auth. * Added packages link for orgs. * Fixed anonymous org access. * Enable copy button for setup instructions. * Merge error * Added suggestions. * Fixed merge. * Handle "generic". * Added link for TODO. * Added suggestions. * Changed temporary buffer filename. * Added suggestions. * Apply suggestions from code review Co-authored-by: Thomas Boerger <thomas@webhippie.de> * Update docs/content/doc/packages/nuget.en-us.md Co-authored-by: wxiaoguang <wxiaoguang@gmail.com> Co-authored-by: Thomas Boerger <thomas@webhippie.de>
2022-03-30 08:42:47 +00:00
## Mirror (`mirror`)
- `ENABLED`: **true**: Enables the mirror functionality. Set to **false** to disable all mirrors. Pre-existing mirrors remain valid but won't be updated; may be converted to regular repo.
- `DISABLE_NEW_PULL`: **false**: Disable the creation of **new** pull mirrors. Pre-existing mirrors remain valid. Will be ignored if `mirror.ENABLED` is `false`.
- `DISABLE_NEW_PUSH`: **false**: Disable the creation of **new** push mirrors. Pre-existing mirrors remain valid. Will be ignored if `mirror.ENABLED` is `false`.
- `DEFAULT_INTERVAL`: **8h**: Default interval between each check
- `MIN_INTERVAL`: **10m**: Minimum interval for checking. (Must be >1m).
## LFS (`lfs`)
Storage configuration for lfs data. It will be derived from default `[storage]` or
`[storage.xxx]` when set `STORAGE_TYPE` to `xxx`. When derived, the default of `PATH`
is `data/lfs` and the default of `MINIO_BASE_PATH` is `lfs/`.
- `STORAGE_TYPE`: **local**: Storage type for lfs, `local` for local disk or `minio` for s3 compatible object storage service or other name defined with `[storage.xxx]`
- `SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
- `PATH`: **./data/lfs**: Where to store LFS files, only available when `STORAGE_TYPE` is `local`. If not set it fall back to deprecated LFS_CONTENT_PATH value in [server] section.
- `MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
- `MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
- `MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is` `minio`
- `MINIO_BUCKET`: **gitea**: Minio bucket to store the lfs only available when `STORAGE_TYPE` is `minio`
- `MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
- `MINIO_BASE_PATH`: **lfs/**: Minio base path on the bucket only available when `STORAGE_TYPE` is `minio`
- `MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
- `MINIO_INSECURE_SKIP_VERIFY`: **false**: Minio skip SSL verification available when STORAGE_TYPE is `minio`
## Storage (`storage`)
Default storage configuration for attachments, lfs, avatars and etc.
- `SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
- `MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
- `MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
- `MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is` `minio`
- `MINIO_BUCKET`: **gitea**: Minio bucket to store the data only available when `STORAGE_TYPE` is `minio`
- `MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
- `MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
- `MINIO_INSECURE_SKIP_VERIFY`: **false**: Minio skip SSL verification available when STORAGE_TYPE is `minio`
And you can also define a customize storage like below:
```ini
[storage.my_minio]
STORAGE_TYPE = minio
; Minio endpoint to connect only available when STORAGE_TYPE is `minio`
MINIO_ENDPOINT = localhost:9000
; Minio accessKeyID to connect only available when STORAGE_TYPE is `minio`
MINIO_ACCESS_KEY_ID =
; Minio secretAccessKey to connect only available when STORAGE_TYPE is `minio`
MINIO_SECRET_ACCESS_KEY =
; Minio bucket to store the attachments only available when STORAGE_TYPE is `minio`
MINIO_BUCKET = gitea
; Minio location to create bucket only available when STORAGE_TYPE is `minio`
MINIO_LOCATION = us-east-1
; Minio enabled ssl only available when STORAGE_TYPE is `minio`
MINIO_USE_SSL = false
; Minio skip SSL verification available when STORAGE_TYPE is `minio`
MINIO_INSECURE_SKIP_VERIFY = false
```
And used by `[attachment]`, `[lfs]` and etc. as `STORAGE_TYPE`.
## Repository Archive Storage (`storage.repo-archive`)
Configuration for repository archive storage. It will inherit from default `[storage]` or
`[storage.xxx]` when set `STORAGE_TYPE` to `xxx`. The default of `PATH`
is `data/repo-archive` and the default of `MINIO_BASE_PATH` is `repo-archive/`.
- `STORAGE_TYPE`: **local**: Storage type for repo archive, `local` for local disk or `minio` for s3 compatible object storage service or other name defined with `[storage.xxx]`
- `SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
- `PATH`: **./data/repo-archive**: Where to store archive files, only available when `STORAGE_TYPE` is `local`.
- `MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
- `MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
- `MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is` `minio`
- `MINIO_BUCKET`: **gitea**: Minio bucket to store the lfs only available when `STORAGE_TYPE` is `minio`
- `MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
- `MINIO_BASE_PATH`: **repo-archive/**: Minio base path on the bucket only available when `STORAGE_TYPE` is `minio`
- `MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
- `MINIO_INSECURE_SKIP_VERIFY`: **false**: Minio skip SSL verification available when STORAGE_TYPE is `minio`
## Proxy (`proxy`)
- `PROXY_ENABLED`: **false**: Enable the proxy if true, all requests to external via HTTP will be affected, if false, no proxy will be used even environment http_proxy/https_proxy
- `PROXY_URL`: **\<empty\>**: Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy
- `PROXY_HOSTS`: **\<empty\>**: Comma separated list of host names requiring proxy. Glob patterns (*) are accepted; use ** to match all hosts.
i.e.
```ini
PROXY_ENABLED = true
PROXY_URL = socks://127.0.0.1:1080
PROXY_HOSTS = *.github.com
```
Implement actions (#21937) Close #13539. Co-authored by: @lunny @appleboy @fuxiaohei and others. Related projects: - https://gitea.com/gitea/actions-proto-def - https://gitea.com/gitea/actions-proto-go - https://gitea.com/gitea/act - https://gitea.com/gitea/act_runner ### Summary The target of this PR is to bring a basic implementation of "Actions", an internal CI/CD system of Gitea. That means even though it has been merged, the state of the feature is **EXPERIMENTAL**, and please note that: - It is disabled by default; - It shouldn't be used in a production environment currently; - It shouldn't be used in a public Gitea instance currently; - Breaking changes may be made before it's stable. **Please comment on #13539 if you have any different product design ideas**, all decisions reached there will be adopted here. But in this PR, we don't talk about **naming, feature-creep or alternatives**. ### ⚠️ Breaking `gitea-actions` will become a reserved user name. If a user with the name already exists in the database, it is recommended to rename it. ### Some important reviews - What is `DEFAULT_ACTIONS_URL` in `app.ini` for? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1055954954 - Why the api for runners is not under the normal `/api/v1` prefix? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061173592 - Why DBFS? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061301178 - Why ignore events triggered by `gitea-actions` bot? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1063254103 - Why there's no permission control for actions? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1090229868 ### What it looks like <details> #### Manage runners <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205870657-c72f590e-2e08-4cd4-be7f-2e0abb299bbf.png"> #### List runs <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205872794-50fde990-2b45-48c1-a178-908e4ec5b627.png"> #### View logs <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205872501-9b7b9000-9542-4991-8f55-18ccdada77c3.png"> </details> ### How to try it <details> #### 1. Start Gitea Clone this branch and [install from source](https://docs.gitea.io/en-us/install-from-source). Add additional configurations in `app.ini` to enable Actions: ```ini [actions] ENABLED = true ``` Start it. If all is well, you'll see the management page of runners: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205877365-8e30a780-9b10-4154-b3e8-ee6c3cb35a59.png"> #### 2. Start runner Clone the [act_runner](https://gitea.com/gitea/act_runner), and follow the [README](https://gitea.com/gitea/act_runner/src/branch/main/README.md) to start it. If all is well, you'll see a new runner has been added: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205878000-216f5937-e696-470d-b66c-8473987d91c3.png"> #### 3. Enable actions for a repo Create a new repo or open an existing one, check the `Actions` checkbox in settings and submit. <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205879705-53e09208-73c0-4b3e-a123-2dcf9aba4b9c.png"> <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205879383-23f3d08f-1a85-41dd-a8b3-54e2ee6453e8.png"> If all is well, you'll see a new tab "Actions": <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205881648-a8072d8c-5803-4d76-b8a8-9b2fb49516c1.png"> #### 4. Upload workflow files Upload some workflow files to `.gitea/workflows/xxx.yaml`, you can follow the [quickstart](https://docs.github.com/en/actions/quickstart) of GitHub Actions. Yes, Gitea Actions is compatible with GitHub Actions in most cases, you can use the same demo: ```yaml name: GitHub Actions Demo run-name: ${{ github.actor }} is testing out GitHub Actions 🚀 on: [push] jobs: Explore-GitHub-Actions: runs-on: ubuntu-latest steps: - run: echo "🎉 The job was automatically triggered by a ${{ github.event_name }} event." - run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by GitHub!" - run: echo "🔎 The name of your branch is ${{ github.ref }} and your repository is ${{ github.repository }}." - name: Check out repository code uses: actions/checkout@v3 - run: echo "💡 The ${{ github.repository }} repository has been cloned to the runner." - run: echo "🖥️ The workflow is now ready to test your code on the runner." - name: List files in the repository run: | ls ${{ github.workspace }} - run: echo "🍏 This job's status is ${{ job.status }}." ``` If all is well, you'll see a new run in `Actions` tab: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205884473-79a874bc-171b-4aaf-acd5-0241a45c3b53.png"> #### 5. Check the logs of jobs Click a run and you'll see the logs: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205884800-994b0374-67f7-48ff-be9a-4c53f3141547.png"> #### 6. Go on You can try more examples in [the documents](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions) of GitHub Actions, then you might find a lot of bugs. Come on, PRs are welcome. </details> See also: [Feature Preview: Gitea Actions](https://blog.gitea.io/2022/12/feature-preview-gitea-actions/) --------- Co-authored-by: a1012112796 <1012112796@qq.com> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com> Co-authored-by: delvh <dev.lh@web.de> Co-authored-by: ChristopherHX <christopher.homberger@web.de> Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-01-31 01:45:19 +00:00
## Actions (`actions`)
- `ENABLED`: **false**: Enable/Disable actions capabilities
- `DEFAULT_ACTIONS_URL`: **https://gitea.com**: Default address to get action plugins, e.g. the default value means downloading from "<https://gitea.com/actions/checkout>" for "uses: actions/checkout@v3"
Implement actions (#21937) Close #13539. Co-authored by: @lunny @appleboy @fuxiaohei and others. Related projects: - https://gitea.com/gitea/actions-proto-def - https://gitea.com/gitea/actions-proto-go - https://gitea.com/gitea/act - https://gitea.com/gitea/act_runner ### Summary The target of this PR is to bring a basic implementation of "Actions", an internal CI/CD system of Gitea. That means even though it has been merged, the state of the feature is **EXPERIMENTAL**, and please note that: - It is disabled by default; - It shouldn't be used in a production environment currently; - It shouldn't be used in a public Gitea instance currently; - Breaking changes may be made before it's stable. **Please comment on #13539 if you have any different product design ideas**, all decisions reached there will be adopted here. But in this PR, we don't talk about **naming, feature-creep or alternatives**. ### ⚠️ Breaking `gitea-actions` will become a reserved user name. If a user with the name already exists in the database, it is recommended to rename it. ### Some important reviews - What is `DEFAULT_ACTIONS_URL` in `app.ini` for? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1055954954 - Why the api for runners is not under the normal `/api/v1` prefix? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061173592 - Why DBFS? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061301178 - Why ignore events triggered by `gitea-actions` bot? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1063254103 - Why there's no permission control for actions? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1090229868 ### What it looks like <details> #### Manage runners <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205870657-c72f590e-2e08-4cd4-be7f-2e0abb299bbf.png"> #### List runs <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205872794-50fde990-2b45-48c1-a178-908e4ec5b627.png"> #### View logs <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205872501-9b7b9000-9542-4991-8f55-18ccdada77c3.png"> </details> ### How to try it <details> #### 1. Start Gitea Clone this branch and [install from source](https://docs.gitea.io/en-us/install-from-source). Add additional configurations in `app.ini` to enable Actions: ```ini [actions] ENABLED = true ``` Start it. If all is well, you'll see the management page of runners: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205877365-8e30a780-9b10-4154-b3e8-ee6c3cb35a59.png"> #### 2. Start runner Clone the [act_runner](https://gitea.com/gitea/act_runner), and follow the [README](https://gitea.com/gitea/act_runner/src/branch/main/README.md) to start it. If all is well, you'll see a new runner has been added: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205878000-216f5937-e696-470d-b66c-8473987d91c3.png"> #### 3. Enable actions for a repo Create a new repo or open an existing one, check the `Actions` checkbox in settings and submit. <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205879705-53e09208-73c0-4b3e-a123-2dcf9aba4b9c.png"> <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205879383-23f3d08f-1a85-41dd-a8b3-54e2ee6453e8.png"> If all is well, you'll see a new tab "Actions": <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205881648-a8072d8c-5803-4d76-b8a8-9b2fb49516c1.png"> #### 4. Upload workflow files Upload some workflow files to `.gitea/workflows/xxx.yaml`, you can follow the [quickstart](https://docs.github.com/en/actions/quickstart) of GitHub Actions. Yes, Gitea Actions is compatible with GitHub Actions in most cases, you can use the same demo: ```yaml name: GitHub Actions Demo run-name: ${{ github.actor }} is testing out GitHub Actions 🚀 on: [push] jobs: Explore-GitHub-Actions: runs-on: ubuntu-latest steps: - run: echo "🎉 The job was automatically triggered by a ${{ github.event_name }} event." - run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by GitHub!" - run: echo "🔎 The name of your branch is ${{ github.ref }} and your repository is ${{ github.repository }}." - name: Check out repository code uses: actions/checkout@v3 - run: echo "💡 The ${{ github.repository }} repository has been cloned to the runner." - run: echo "🖥️ The workflow is now ready to test your code on the runner." - name: List files in the repository run: | ls ${{ github.workspace }} - run: echo "🍏 This job's status is ${{ job.status }}." ``` If all is well, you'll see a new run in `Actions` tab: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205884473-79a874bc-171b-4aaf-acd5-0241a45c3b53.png"> #### 5. Check the logs of jobs Click a run and you'll see the logs: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205884800-994b0374-67f7-48ff-be9a-4c53f3141547.png"> #### 6. Go on You can try more examples in [the documents](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions) of GitHub Actions, then you might find a lot of bugs. Come on, PRs are welcome. </details> See also: [Feature Preview: Gitea Actions](https://blog.gitea.io/2022/12/feature-preview-gitea-actions/) --------- Co-authored-by: a1012112796 <1012112796@qq.com> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com> Co-authored-by: delvh <dev.lh@web.de> Co-authored-by: ChristopherHX <christopher.homberger@web.de> Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-01-31 01:45:19 +00:00
`DEFAULT_ACTIONS_URL` indicates where should we find the relative path action plugin. i.e. when use an action in a workflow file like
```yaml
name: versions
on:
push:
branches:
- main
- releases/*
jobs:
build:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
```
Now we need to know how to get actions/checkout, this configuration is the default git server to get it. That means we will get the repository via git clone ${DEFAULT_ACTIONS_URL}/actions/checkout and fetch tag v3.
To help people who don't want to mirror these actions in their git instances, the default value is https://gitea.com
To help people run actions totally in their network, they can change the value and copy all necessary action repositories into their git server.
Of course we should support the form in future PRs like
```yaml
steps:
- uses: gitea.com/actions/checkout@v3
```
although Github don't support this form.
## Other (`other`)
- `SHOW_FOOTER_BRANDING`: **false**: Show Gitea branding in the footer.
- `SHOW_FOOTER_VERSION`: **true**: Show Gitea and Go version information in the footer.
2019-10-01 23:25:32 +00:00
- `SHOW_FOOTER_TEMPLATE_LOAD_TIME`: **true**: Show time of template execution in the footer.
- `ENABLE_SITEMAP`: **true**: Generate sitemap.
- `ENABLE_FEED`: **true**: Enable/Disable RSS/Atom feed.