There is a serious issue with the v176 migration where there is a mistaken missing
label_id selection.
*introduced by #14912*
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Never add labels not from this repository or organisation and remove org labels on transfer
Prevent the addition of labels from outside of the repository or
organisation and remove organisation labels on transfer.
Related #14908
Signed-off-by: Andrew Thornton <art27@cantab.net>
* switch to use sql
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove AS
Signed-off-by: Andrew Thornton <art27@cantab.net>
* subquery alias
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Give me some AS?
Signed-off-by: Andrew Thornton <art27@cantab.net>
* double AS
Signed-off-by: Andrew Thornton <art27@cantab.net>
* try try again
Signed-off-by: Andrew Thornton <art27@cantab.net>
* once more around the merry go round
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix api problem
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add outside label consistency check into doctor
This PR adds another consistency check into doctor in order to detect
labels that have been added from outside of repositories and organisations
Fix#14908
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix migration
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prep for merge
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix postgres ID sequences broken by recreate-table
Unfortunately there is a subtle problem with recreatetable on postgres which
leads to the sequences not being renamed and not being left at 0.
Fix#14725
Signed-off-by: Andrew Thornton <art27@cantab.net>
* let us try information_schema instead
Signed-off-by: Andrew Thornton <art27@cantab.net>
* try again
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
* Ensure validation occurs on clone addresses too
Fix#14984
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix api tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* chore: rewrite format.
* chore: update format
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
* chore: update format
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
* chore: Adjacent parameters with the same type should be grouped together
* chore: update format.
* API: fix set milestone on PR creation
pr creation via API failed with 404, because we searched
for milestoneID 0, due to uninitialized var usage D:
* add tests
* fix expected status codes
* fix tests
Co-authored-by: 6543 <6543@obermui.de>
* Never add labels not from this repository or organisation and remove org labels on transfer
Prevent the addition of labels from outside of the repository or
organisation and remove organisation labels on transfer.
Related #14908
* switch to use sql
* subquery alias
* once more around the merry go round
* fix api problem
Closed milestones and issues should only be marked overdue if they were
closed after their deadline.
Fix: #14536
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make auto check manual merge as a chooseable mod and add manual merge way on ui
as title, Before this pr, we use same way with GH to check manually merge.
It good, but in some special cases, misjudgments can occur. and it's hard
to fix this bug. So I add option to allow repo manager block "auto check manual merge"
function, Then it will have same style like gitlab(allow empty pr). and to compensate for
not being able to detect THE PR merge automatically, I added a manual approach.
Signed-off-by: a1012112796 <1012112796@qq.com>
* make swager
* api support
* ping ci
* fix TestPullCreate_EmptyChangesWithCommits
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Apply review suggestions and add test
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* fix build
* test error message
* make fmt
* Fix indentation issues identified by @silverwind
Co-authored-by: silverwind <me@silverwind.io>
* Fix tests and make manually merged disabled error on API the same
Signed-off-by: Andrew Thornton <art27@cantab.net>
* a small nit
* fix wrong commit id error
* fix bug
* simple test
* fix test
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Most DBs apart from SQLite will use a default Collation that is not case insensitive.
This means that SearchIssuesByKeyword becomes case sensitive for db indexing - in
contrast to the bleve and elastic indexers.
This PR simply uses UPPER(...) to do the LIKE - and although it may be more efficient
to change collations this would be a non-trivial task.
Fix#13663
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make repo as "pending transfer" if on transfer start doer has no right to create repo in new destination
* if new pending transfer ocured, create UI & Mail notifications
Instead of causing a log.Fatal, we should handle broken OAuth2
providers by disabling them.
Fix#8930
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Create Xorm session provider
This PR creates a Xorm session provider which creates
the appropriate Session table for macaron/session.
Fix#7137
Signed-off-by: Andrew Thornton <art27@cantab.net>
* extraneous l
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use key instead of ID to be compatible with go-macaron/session
Signed-off-by: Andrew Thornton <art27@cantab.net>
* And change the migration too.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update spacing of imports
Co-authored-by: 6543 <6543@obermui.de>
* Update modules/session/xorm.go
Co-authored-by: techknowlogick <matti@mdranta.net>
* add xorm provider to the virtual provider
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prep for master merge
* prep for merge master
* As per @lunny
* move migration out of the way
* Move to call this db session as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Prevent adding nil label to .AddedLabels or .RemovedLabels
There are possibly a few old databases out there with malmigrated data that can
cause panics with empty labels being migrated.
This PR adds a few tests to prevent nil labels being added.
Fix#14466
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add doctor command to remove the broken label comments
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Fix GPG key deletion when user is deleted
Per #14531, deleting a user account will delete the user's GPG keys
from the `gpg_key` table but not from `gpg_key_import`, which causes
an error when creating an account with the same email and attempting
to re-add the same key. This commit deletes all entries from
`gpg_key_import` that match any GPG key IDs belonging to the user.
* Format added code in models/user.go
* Create a new function for listing GPG keys and apply it
Create a new function `listGPGKeys` and replace a previous use
of `ListGPGKeys`. Thanks to @6543 for the patch.
Co-authored-by: Anton Khimich <anton.khimicha@mail.utoronto.ca>
Co-authored-by: 6543 <6543@obermui.de>
Migrations currently uses the default Xorm mapper which is
not the same as the mapper Gitea actually uses.
This means that there is a difference between the struct
parsing and mapping to database tables in migrations as
compared to normal Sync2.
This was the cause for the catastrophic problem in v168 -
untagged fields are not mapped in the same way in migrations
as compared to outside of migrations.
This is also likely the cause of some weird subtle failures
in other migrations as any untagged field may not be being
mapped exactly the same way.
This PR suggests that we ensure that the mapper is set at
the start of the migrations code - but also enforces a strict
clean mapper between each migration.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix mig 141
* Add Migration to fix it
* update null values to false first
* Alter Table if posible
* use dropTableColumns instead of recreateTable
* MySQL use Alter
* Postgres use Alter
* Update models/migrations/v167.go
* Apply suggestions from code review
* use 2x add col & 2x update & 2x drop col
* let sqlite be the only issue
* use recreate since it just WORKS
Close **Prune hook_task Table (#10741)**
Added a cron job to delete webhook deliveries in the hook_task table. It can be turned on/off and the schedule controlled globally via app.ini. The data can be deleted by either the age of the delivery which is the default or by deleting the all but the most recent deliveries _per webhook_.
Note: I had previously submitted pr #11416 but I closed it when I realized that I had deleted per repository instead of per webhook. Also, I decided allowing the settings to be overridden via the ui was overkill. Also this version allows the deletion by age which is probably what most people would want.
* Add redirect for user
* Add redirect for orgs
* Add user redirect test
* Appease linter
* Add comment to DeleteUserRedirect function
* Fix locale changes
* Fix GetUserByParams
* Fix orgAssignment
* Remove debug logging
* Add redirect prompt
* Dont Export DeleteUserRedirect & only use it within a session
* Unexport newUserRedirect
* cleanup
* Fix & Dedub API code
* Format Template
* Add Migration & rm dublicat
* Refactor: unexport newRepoRedirect() & rm dedub del exec
* if this fails we'll need to re-rename the user directory
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* refactor models.DeleteComment and delete related reactions too
* use deleteComment for UserDeleteWithCommentsMaxDays in DeleteUser
* nits
* Use time.Duration as other time settings have
* docs
* Resolve Fixme & fix potential deadlock
* Disabled by Default
* Update Config Value Description
* switch args
* Update models/issue_comment.go
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* add notification about running stopwatch to header
* serialize seconds, duration in stopwatches api
* ajax update stopwatch
i should get my testenv working locally...
* new variant: hover dialog
* noscript compatibility
* js: live-update stopwatch time
* js live update robustness
* Add support for ed25519_sk and ecdsa_sk SSH keys
These start with sk-ssh-ed25519@openssh.com and sk-ecdsa-sha2-nistp256@openssh.com.
They are supported in recent versions of go x/crypto/ssh and OpenSSH 8.2
or higher.
* skip ssh-keygen
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Implement ghost comment mitigation
Adds a config option USER_DELETE_WITH_COMMENTS_MAX_DAYS to the [service] section. See https://codeberg.org/Codeberg/Discussion/issues/24 for the underlying issue.
* cleanup
* use setting module correctly
* add to docs
Co-authored-by: Moritz Marquardt <git@momar.de>
* Add review requested filter on pull request overview #13682
fix formatting
* add review_requested filter to /repos/issues/search API endpoint
* only Approve and Reject status should supersede Request status
* add support for team reviews
* refactor: remove duplication of issue filtering conditions
* move SaltGeneration into HashPasswort and rename it to what it does
* Migration: Where Password is Valid with Empty String delete it
* prohibit empty password hash
* let SetPassword("") unset pwd stuff
Fixed#8861
* use ajax on PR review page
* handle review comments
* extract duplicate code
FetchCodeCommentsByLine was initially more or less copied from fetchCodeCommentsByReview. Now they both use a common findCodeComments function instead
* use the Engine that was passed into the method
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix wrong type on hooktask to convert typ from char(16) to varchar(16)
* Fix bugs
* Improve code
* Use different trim function for MSSQL
* Fix bug
* Removed wrong changed line
* Removed wrong changed line
* Fix nullable
* Fix lint
* Ignore sqlite on migration
* Fix mssql modify column failure
* Move modifyColumn to migrations.go so that other migrate function could use it
* Added MirrorInterval to the API
* Remove MirrorInterval from CreateRepository
* Removed Duplicate UpdateMirror Function
* Updated Error Logging
* Update Log Message for is not Mirror
Co-authored-by: 6543 <6543@obermui.de>
* Delete Debug Statement that snuck in
Co-authored-by: zeripath <art27@cantab.net>
* Add Check for If Interval is too small
* Output to API Call
* Add Error Object when time is Less than Min Interval
* Frequency Error Message
Co-authored-by: zeripath <art27@cantab.net>
* Allow Zero Mirror Interval
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
Fixes#14187: mention handling extracted from email notification code
Fixes#14013: add notification for mentions in pull request code comments
Fixes#13450: Not receiving any emails with setting "Only Email on Mention"
* Ensure that schema search path is set with every connection on postgres
Unfortunately every connection to postgres requires that the search path is
set appropriately.
This PR shadows the postgres driver to ensure that as soon as a connection
is open, the search_path is set appropriately.
Fix#14088
Signed-off-by: Andrew Thornton <art27@cantab.net>
* no golangci-lint that is not a helpful suggestion
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use Execer if available
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This is "minimal" in the sense that only the Authorization Code Flow
from OpenID Connect Core is implemented. No discovery, no configuration
endpoint, and no user scope management.
OpenID Connect is an extension to the (already implemented) OAuth 2.0
protocol, and essentially an `id_token` JWT is added to the access token
endpoint response when using the Authorization Code Flow. I also added
support for the "nonce" field since it is required to be used in the
id_token if the client decides to include it in its initial request.
In order to enable this extension an OAuth 2.0 scope containing
"openid" is needed. Other OAuth 2.0 requests should not be impacted by
this change.
This minimal implementation is enough to enable single sign-on (SSO)
for other sites, e.g. by using something like `mod_auth_openidc` to
only allow access to a CI server if a user has logged into Gitea.
Fixes: #1310
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Change topic name size from 25 to 50
* recreateTable requires full bean definition
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Disable SSH key addition and deletion when externally managed
When a user has a login source which has SSH key management
key addition and deletion using the UI should be disabled.
Fix#13983
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make only externally managed keys disabled
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* remove github.com/unknwon/com from models
* dont use "com.ToStr()"
* replace "com.ToStr" with "fmt.Sprint" where its easy to do
* more refactor
* fix test
* just "proxy" Copy func for now
* as per @lunny
* now uses the same permission model as for the activity feed:
only include activities in repos, that the doer has access to.
this might be somewhat slower.
* also improves handling of user.KeepActivityPrivate (still shows
the heatmap to self & admins)
* extend tests
* adjust integration test to new behaviour
* add access to actions for admins
* extend heatmap unit tests
* Show dropdown with all statuses for commit
* Use popups
* Remove unnecessary change
* Style popup
* Use divided list
* As per @silverwind
* Refactor GetLastCommitStatus
* Missing dropdown on repo home and commit page
* Fix tests
* Make status icon be a part of a link on PR list
* Fix missing translation call
* Indent fix
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Trim the branch prefix from action.GetBranch
#13882 has revealed that the refname of an action is actually only a
refname pattern and necessarily a branch. For examplem pushing to
refs/heads/master will result in action with refname refs/heads/master
but pushing to master will result in a refname master.
The simplest solution to providing a fix here is to trim the prefix
therefore this PR proposes this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/action.go
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: a1012112796 <1012112796@qq.com>
The frontpage uses a rather strange method to obtain the commit's avatar
which I've overlooked earlier. I don't exactly understand how it works
but this change fixes the wrong default avatars by using the function
that was in previous use.
Also introduced a few constants for size an size increase factor.
Fixes: https://github.com/go-gitea/gitea/issues/13844
* Direct avatar rendering
This adds new template helpers for avatar rendering which output image
elements with direct links to avatars which makes them cacheable by the
browsers.
This should be a major performance improvment for pages with many avatars.
* fix avatars of other user's profile pages
* fix top border on user avatar name
* uncircle avatars
* remove old incomplete avatar selector
* use title attribute for name and add it back on blame
* minor refactor
* tweak comments
* fix url path join and adjust test to new result
* dedupe functions
* add black list and white list support for migrating repositories
* fix fmt
* fix lint
* fix vendor
* fix modules.txt
* clean diff
* specify log message
* use blocklist/allowlist
* allways use lowercase to match url
* Apply allow/block
* Settings: use existing "migrations" section
* convert domains lower case
* dont store unused value
* Block private addresses for migration by default
* fix lint
* use proposed-upstream func to detect private IP addr
* a nit
* add own error for blocked migration, add tests, imprufe api
* fix test
* fix-if-localhost-is-ipv4
* rename error & error message
* rename setting options
* Apply suggestions from code review
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* ui: show 'owner' tag for real owner
Signed-off-by: a1012112796 <1012112796@qq.com>
* Update custom/conf/app.example.ini
* simplify logic
fix logic
fix a small bug about original author
* remove system manager tag
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add time filter for issue search
* Add limit option for paggination
* Add Filter for: Created by User, Assigned to User, Mentioning User
* update swagger
* Add Tests for limit, before & since
* Improve error feedback for duplicate deploy keys
Instead of a generic HTTP 500 error page, a flash message is rendered
with the deploy key page template so inform the user that a key with the
intended title already exists.
* API returns 422 error when key with name exists
* Add email validity checking
Add email validity checking for the following routes:
[Web interface]
1. User registration
2. User creation by admin
3. Adding an email through user settings
[API]
1. POST /admin/users
2. PATCH /admin/users/:username
3. POST /user/emails
* Add further tests
* Add signup email tests
* Add email validity check for linking existing account
* Address PR comments
* Remove unneeded DB session
* Move email check to updateUser
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
When migrating repositories with reactions with deleted users, the original
author id may be -1. This means that it is possible to end up attempting
to create multiple reactions with the same [ Type, IssueID, CommentID, UserID,
OriginalAuthorID ] thus breaking the constraints.
On SQLite this appears to cause a deadlock but on other dbs this will
cause the migration to fail.
This PR extends the constraint to include the original author username
in the constraint.
Fix#13271
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When replying to an outdated comment it should not appear on the files page
This happened because the comment took the latest commitID as its base instead of the
reviewID that it was replying to.
There was also no way of creating an already outdated comment - and a
reply to a review on an outdated line should be outdated.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix broken migration
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix mssql
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create temporary table because ... well MSSQL ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create temporary table because ... well MSSQL ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create temporary table because ... well MSSQL ...
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix mssql
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move session within the batch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* regen the sqlcmd each time round the loop
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc5214023.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb56.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685e.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* When replying to an outdated comment it should not appear on the files page
This happened because the comment took the latest commitID as its base instead of the
reviewID that it was replying to.
There was also no way of creating an already outdated comment - and a
reply to a review on an outdated line should be outdated.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Refactor Logger to make a logger interface and make it possible to
wrap loggers for specific purposes.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Create function to group label comments
* Combine multiple label additions into one
* Group removed and added labels in the same comment
* Fix indentation on comments.tmpl
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* added mastodon provider to oauth code
* changed go.mod and vendor/modules.txt to add updated goth
* vendored mastodon and new goth
* committing result of go mod tidy && go mod vendor
* added pic and mastodon to oauth models
* handled instance url
* applied lafriks suggestion
* Update web_src/js/index.js
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
* Ensure topics added using the API are added to the repository
Fix#12426
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Store task errors following migrations and display them
When migrate tasks fail store the error in the task table
and ensure that they show on the status page.
Fix#13242
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update web_src/js/index.js
* Hide the failed first
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Keep database transactions not too big
* Fix#13255
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Only cache the last repo
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* show author for releases created outside Gitea UI.
Also show the number of commits behind the default branch for tags created outside the UI
don't show the tag date again for tags pushed to the repo. Since it is already on the sidebar and looks like duplication
* add migration for already existing tags
* update as per review
* fix build
* add space
* fix import statments
* Update models/migrations/v113.go
Co-Authored-By: zeripath <art27@cantab.net>
* Update models/migrations/v114.go
Co-authored-by: 6543 <6543@obermui.de>
* Update services/release/release.go
Co-authored-by: 6543 <6543@obermui.de>
* impruve
* remove dependency on models package
* Close the gitrepos in a defer to ensure that they are closed.
* gofmt
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix images in wiki edit preview (#11546)
Make sure wiki editor sets wiki to true so gitea renders it as a wiki page.
Also change the context data attr for edit form. This looks wrong but everywhere else in our code assumes the urlPrefix to be just the repo url when rendering and manually adds /wiki to the rendered url regardless.
Fixes#11540
* Avatar support minio
* Support repo avatar minio storage
* Add missing migration
* Fix bug
* Fix test
* Add test for minio store type on avatars and repo avatars; Add documents
* Fix bug
* Fix bug
* Add back missed avatar link method
* refactor codes
* Simplify the codes
* Code improvements
* Fix lint
* Fix test mysql
* Fix test mysql
* Fix test mysql
* Fix settings
* Fix test
* fix test
* Fix bug
* [Enhancement] Allow admin to merge pr with protected file changes
As tilte, show protected message in diff page and merge box.
Signed-off-by: a1012112796 <1012112796@qq.com>
* remove unused ver
* Update options/locale/locale_en-US.ini
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
* Add TrN
* Apply suggestions from code review
* fix lint
* Update options/locale/locale_en-US.ini
Co-authored-by: zeripath <art27@cantab.net>
* Apply suggestions from code review
* move pr proteced files check to TestPatch
* Call TestPatch when protected branches settings changed
* Apply review suggestion @CirnoT
* move to service @lunny
* slightly restructure routers/private/hook.go
Adds a lot of comments and simplifies the logic
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* skip duplicate protected files check
* fix check logic
* slight refactor of TestPatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking for protected files changes in TestPatch use the temporary repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix introduced issue with hook
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the check on PR index being greater than 0 as it unnecessary
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Provide self-registering storage system
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More simplification
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove old strings from setting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* oops attachments not attachment
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add timestamps to Star, Label, LanguageStat, Follow, Watch and Collaboration
* Star do not need updated
* LanguageStat do not need update (they wont change)
* fix unit-test
Add team support for review request
Block #11355
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Prohibit automatic downgrades by checking the version of the db and warning if the version number should be lower.
Close#13107
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
Instead of a generic HTTP 500 error page, a flash message is rendered with the deploy key page template to inform the user that a key with the intended title already exists.
Fixes#13110
This PR updates golangci-lint to the latest version 1.31.0.
The upgrade introduced a new check for which I've fixed or disabled most cases.
Signed-off-by: kolaente <k@knt.li>
* Add ssh certificate support
* Add ssh certificate support to builtin ssh
* Write trusted-user-ca-keys.pem based on configuration
* Update app.example.ini
* Update templates/user/settings/keys_principal.tmpl
Co-authored-by: silverwind <me@silverwind.io>
* Remove unused locale string
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* Add missing creation of SSH.Rootpath
* Update cheatsheet, example and locale strings
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
* Optimizations based on feedback
* Validate CA keys for external sshd
* Add filename option and change default filename
Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is
RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem
Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty.
Add some more documentation.
* Remove unneeded principalkey functions
* Add blank line
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option
This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default
email,username this means that users only can add the principals
that match their email or username.
To allow anything the admin need to set the option anything.
This allows for a safe default in gitea which protects against malicious
users using other user's prinicipals. (before that user could set it).
This commit also has some small other fixes from the last code review.
* Rewrite principal keys file on user deletion
* Use correct rewrite method
* Set correct AuthorizedPrincipalsBackup default setting
* Rewrite principalsfile when adding principals
* Add update authorized_principals option to admin dashboard
* Handle non-primary emails
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add the command actually to the dashboard template
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* By default do not show principal options unless there are CA keys set or they are explicitly set
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allow settings when enabled
* Fix typos in TrustedUserCAKeys path
* Allow every CASignatureAlgorithms algorithm
As this depends on the content of TrustedUserCAKeys we should allow all
signature algorithms as admins can choose the specific algorithm on their
signing CA
* Update models/ssh_key.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix linting issue
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
`models.getUserRepoPermission(...)` calls `HasOrgVisible` which
uses `models.x` potentially outside of the transaction `e` provided
as an argument to `getUserRepoPermission`.
This PR switches to use `hasOrgVisible(e, ...)`.
Fix#12983
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Disable DSA ssh keys by default
OpenSSH has disabled DSA keys since version 7.0
As the docker runs openssh > v7.0 we should just disable
DSA keys by default.
Refers to #11417
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Just disable DSA keys by default
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove DSA type
* Fix Tests
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
(Re)Load issue labels when labels are added or removed
This means that the label state that the webhooks produce accurately matches
the changes that they are reporting.
Fix#10660
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Completely quote AppPath and CustomConf paths
Properly handle spaces in AppPath and CustomConf within hooks and
authorized_keys. Unfortunately here we don't seem to be able to get away
with using go-shellquote as it appears that Windows doesn't play too
well with singlequote quoting - therefore we will avoid singlequote
quoting unless we absolutely cannot get away without it, e.g. \n or !.
Fix#10813
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix Test_CmdKeys
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Improved total count of issue when filtered.
* Fixed size of slice when selected 1 repository.
* Improved function of error check.
* improved comment
* Added parameter of return header.
Co-authored-by: 6543 <6543@obermui.de>
* Updated corresponded to the current vendored of "xorm.io/xorm".
* Dedublicated it by store the Options Struct into a variable.
* format code
* Update routers/api/v1/repo/issue.go
Co-authored-by: 6543 <6543@obermui.de>
* Update routers/api/v1/repo/issue.go
Co-authored-by: 6543 <6543@obermui.de>
* Updated number of range.
Co-authored-by: 6543 <6543@obermui.de>
* Updated number of range.
Co-authored-by: 6543 <6543@obermui.de>
* Removed total value.
* make fmt
* Improved value of sql.
Co-authored-by: zeripath <art27@cantab.net>
* Improved value of sql.
* improved message
* improved message
* improved message
* fixed message
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* move GitCommit to APIFormat convertion into convert package
* rename Commit convert functions
* move stopwatch to api convertion into convert package & rm unused code & extend test
* fix compare time
* Gitea not Gogs ;)
if check one user's unit in different repos, it's not necessary to
get user data every time.
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add migration for password algorithm change
#12688 changed the default for the user table leading to sync2 warnings
Unfortunately changing defaults requires a complete table rewrite in general.
However, just dropping columns could be bad - so this PR leverages the
techniques used in recreate table to recreate from the inferred schema
and recreates the user table.
This is not necessarily the correct thing to do - but code sometimes speaks
louder than words.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* oops
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ok lets use the shorter bits for other dbs
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/migrations/v150.go
* Update models/migrations/v150.go
* fix migration
Signed-off-by: Andrew Thornton <art27@cantab.net>
* mv v150 to v151.go
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Rather than rely on the user running the gitea server and db setting the
schema search_path correctly - if gitea is run with a schema we should
simply set the search_path to have that schema first in the path.
Fix#12505
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use different structs for MigrateRepoOptions on UI and API
* Fix TokenAuth and rename UID to an understandable Name
* fix swagger doc
* simplify & mk redable
* R E F A C T O R:
migration has now internal 3 structs to store its options:
* the Options for WebUI: modules/auth/repo_form.go
* the Options for API: modules/structs/repo.go
* the option struct with after validation for internal prossessing: modules/migrations/base/options.go
* Copyright Header
* Deprecate UID - add RepoOwner
* adopt repo.go -> migrate.go
* add comment about each struct purpose
* lint
* Add field with isIssueWriter to front end
* Make branch field editable
* Switch frontend to form and POST from javascript
* Add /issue/id/ref endpoint to routes
* Use UpdateIssueTitle model to change ref in backend
* Removed crossreference check and adding comments on branch change
* Use ref returned from POST to update the field
* Prevent calling loadRepo from models/
* Branch/tag refreshed without page reload
* Remove filter for empty branch name
* Add clear option to tag list as well
* Delete button translation and coloring
* Fix for not showing selected branch name in new issue
* Check that branch is not being changed on a PR
* Change logic
* Notification when changing issue ref
* Fix for renamed permission parameter
* Fix for failing build
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gitea <gitea@fake.local>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* LFS support to be stored on minio
* Fix test
* Fix lint
* Fix lint
* Fix check
* Fix test
* Update documents and add migration for LFS
* Fix some bugs
Provides new command: `gitea doctor recreate-table` which will recreate
db tables and copy the old data in to the new table.
This function can be used to remove the old warning of struct defaults being
out of date.
Fix#8868Fix#3265Fix#8894
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Created and Updated to Milestone table and expose via API
* Expose to UI - To Overloaded ?!?
* fix unit test
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* additional data for type StopWatch in swagger api
* fix lint-backend issue with gofmt
* fix format in v1_json with 'make generate-swagger'
* using issue.LoadRepo() instead of getRepositoryByID()
Co-authored-by: jochen@homeland <no-go@localhost>
Co-authored-by: zeripath <art27@cantab.net>
* Restrict TLS connections to 1.2 minimum
* Set Argon2 as the default KDF
* Fix user.yml
* Remove TLS minversion changes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migration as per @techknowlogick
Signed-off-by: Andrew Thornton <art27@cantab.net>
* set the password algo in the fixtures
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the v148 migration - it needs recreate table to change the defaults
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Nadim Kobeissi <nadim@symbolic.software>
When adding Avatar email-hash pairs we simply want the DB table to
represent a Set. We don't care if the hash-pair is already present,
so we just simply Insert and ignore the error.
Unfortunately this seems to cause some DBs to log the duplicate
insert to their logs - looking like a bug a in Gitea.
Now, there is no standard way in SQL to say Insert but if there's
an error ignore it. MySQL has INSERT IGNORE, PostgreSQL >= 9.5 has
INSERT ... ON CONFLICT DO NOTHING, but I do not believe that SQLite
or MSSQL have variants.
This PR places the insert in a transaction which we are happy to fail
if there is an error - hopefully this will stop the unnecessary
logging.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add cron running API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* placate-swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* return not found
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Prevent NPE on commenting on lines with invalidated comments
Only check for a review if we are replying to a previous review.
Prevent the NPE in #12239 by assuming that a comment without a Review is
non-pending.
Fix#12239
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add hack around to show the broken comments
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migration and remove template hacks
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
* Fix bug preventing transfer to private organization
The code assessing whether a private organization was visible to a user before
allowing transfer was incorrect due to testing membership the wrong way round
This PR fixes this issue and renames the function performing the test to be
clearer.
Further looking at the API for transfer repository - no testing was
performed to ensure that the acting user could actually see the new
owning organization.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* change IsUserPartOfOrg everywhere
Replace all calls to os.Remove/os.RemoveAll by retrying util.Remove/util.RemoveAll and remove circular dependencies from util.
Fix#12339
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
* Handle MSSQL constraints
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update models/migrations/v145.go
* Prevent hang with Sync2
* Agh it's uniques not indexes
* Let us try a different way of finding constraints on the language column
Signed-off-by: Andrew Thornton <art27@cantab.net>
* minor simplification
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try drop index instead?
Signed-off-by: Andrew Thornton <art27@cantab.net>
The code for dropTableColumns has a slightly confusing portion whereby the session is committed for MSSQL but not for other variants.
The v102 migration doesn't actually start a transaction so this weirdness does not affect it. However it probably should attempt to run this in a transaction.
Signed-off-by: Andrew Thornton art27@cantab.net
In #12379 it was discovered that enry v2 has a maximum language length
of 34 characters which is larger than the 30 previously provided.
This PR updates the language column to 50.
Fix#12379
* Don't use legacy send for messages
* Add migrations to ensure Matrix webhooks use PUT
* Set HTTP method to PUT as default
* Fix sql condition..
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Rename getTxnID -> getMatrixTxnID
* Use local variable instead of constant value
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
