During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da563)
(cherry picked from commit f7535a1cef)
(cherry picked from commit 1a90cd37c3)
(cherry picked from commit d86d71340a)
This adds a new `doctor` check: `fix-push-mirrors-without-git-remote`. The new check looks for push mirrors that do not have their remotes configured in git. If automatic fixing is enabled, it will remove these push mirrors from the database.
The check is not run by default, and thus, must be invoked manually. It should be usable in a half-migrated state, too, and as such, fixes#1800.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1853
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 9038e07ef3)
(cherry picked from commit b15bafcbc7)
(cherry picked from commit 93ba05a2dd)
(cherry picked from commit e418ea8082)
(cherry picked from commit 321790a91e)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
Fix gitlab migration unit test
Closes#1837.
The differences in dates can be explained by commit e19b9653ea, which
changed the order in which "created_date" and "updated_date" are
considered.
(cherry picked from commit b0bba20aa4)
Mock HTTP requests in GitLab migration test
This introduces a new utility which can be added to other tests
making HTTP calls to a live service, to cache the responses of this
service in the repository.
(cherry picked from commit 52053b1389)
Enable mocked HTTP responses for GitLab migration test
(cherry picked from commit 19cefc4de2)
Simplify HTTP mocking utility in unit tests
Follow-up to https://codeberg.org/forgejo/forgejo/pulls/1841
(cherry picked from commit ca517c8bb4)
(cherry picked from commit b227e0dd6b)
(cherry picked from commit 6cc9d06556)
(cherry picked from commit f0746e648d)
(cherry picked from commit 414193341b)
- When someone really wants to avoid sharing their email, they could
configure git to use the noreply email for git commits. However if they
also wanted to use SSH signing, it would not show up as verified as the
noreply email address was technically not an activated email address for
the user.
- Add unit tests for the `ParseCommitWithSSHSignature` function.
- Resolves https://codeberg.org/Codeberg/Community/issues/946
(cherry picked from commit 1685de7eba)
(cherry picked from commit b1e8858de9)
(cherry picked from commit 1a6bf24d28)
(cherry picked from commit 0122943345)
(cherry picked from commit cc83614853)
(cherry picked from commit 429febe0dc)
(cherry picked from commit 58a9c2ebe9)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828b)
(cherry picked from commit 6487efcb9d)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d997011)
(cherry picked from commit 435a54f140)
(cherry picked from commit 8ec7b3e448)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff)
(cherry picked from commit 19f295c16b)
(cherry picked from commit 3367dcb2cf)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040)
(cherry picked from commit de5bb2a224)
(cherry picked from commit 8f8e52f31a)
(cherry picked from commit e0d5130312)
(cherry picked from commit f1288d6d9b)
(cherry picked from commit 1db4736fd7)
(cherry picked from commit e8dcbb6cd6)
(cherry picked from commit 09625d6476)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad)
(cherry picked from commit 9b7bbae8c4)
(cherry picked from commit f750b71d3d)
(cherry picked from commit f79af36679)
(cherry picked from commit e76eee334e)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8d)
(cherry picked from commit 053dbd3d50)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a)
(cherry picked from commit d48b84f623)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125cc)
- Databases are one of the most important parts of Forgejo, every
interaction with Forgejo uses the database in one way or another.
Therefore, it is important to maintain the database and recognize when
Forgejo is not doing well with the database. Forgejo already has the
option to log *every* SQL query along with its execution time, but
monitoring becomes impractical for larger instances and takes up
unnecessary storage in the logs.
- Add a QoL enhancement that allows instance administrators to specify a
threshold value beyond which query execution time is logged as a warning
in the xorm logger. The default value is a conservative five seconds to
avoid this becoming a source of spam in the logs.
- The use case for this patch is that with an instance the size of Codeberg, monitoring SQL logs is not very fruitful and most of them are uninteresting. Recently, in the context of persistent deadlock issues (https://codeberg.org/forgejo/forgejo/issues/220), I have noticed that certain queries hold locks on tables like comment and issue for several seconds. This patch helps to identify which queries these are and when they happen.
- Added unit test.
(cherry picked from commit 24bbe7886f)
(cherry picked from commit 6e29145b3c)
(cherry picked from commit 63731e3071)
(cherry picked from commit 3ce1a09736)
(cherry picked from commit a64426907d)
(cherry picked from commit 4b19215691)
(cherry picked from commit e635674435)
(cherry picked from commit 9cf501f1af)
(cherry picked from commit 0d6b934eba)
(cherry picked from commit 4b6c273879)
(cherry picked from commit 89b1315338)
(cherry picked from commit edd8e66ce9)
[GITEA] Add slow SQL query warning (squash) document the setting
(cherry picked from commit ce38599c51)
(cherry picked from commit 794aa67c68)
(cherry picked from commit a4c2c6b004)
(cherry picked from commit 97912752bc)
(cherry picked from commit 00b5327c97)
(cherry picked from commit 1069c860e7)
(cherry picked from commit 84241f42c8)
(cherry picked from commit e4bda0e845)
(cherry picked from commit 7357fb91bf)
(cherry picked from commit a8dd7f6da2)
(cherry picked from commit e636e9f4be)
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda)
(cherry picked from commit 76dffc8621)
(cherry picked from commit ff0615b9d0)
(cherry picked from commit 8712eaa394)
(cherry picked from commit 0c11587582)
(cherry picked from commit 3cbd9fb792)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534c)
(cherry picked from commit d706d9e222)
(cherry picked from commit 6d46261a3f)
(cherry picked from commit f864d18ad3)
(cherry picked from commit 80f8620d0d)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25c)
(cherry picked from commit 63e99df3d1)
(cherry picked from commit b65d777bc7)
(cherry picked from commit 2961f4f632)
(cherry picked from commit f7f723628c)
(cherry picked from commit 9ed7915826)
(cherry picked from commit 8b9ead4608)
(cherry picked from commit 50eeaf1fbc)
(cherry picked from commit ee6f32820e)
(cherry picked from commit bf337bed35)
(cherry picked from commit 6be9501ec0)
(cherry picked from commit b39860570d)
(cherry picked from commit 3f30f486d5)
(cherry picked from commit 5680ecdbe9)
(cherry picked from commit da6a19ad16)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63)
(cherry picked from commit fef1a6dac5)
(cherry picked from commit b0c5165145)
(cherry picked from commit 7ad51b9f8d)
(cherry picked from commit 64f053f383)
(cherry picked from commit f5e78e4c20)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
This field adds the possibility to set the update date when modifying
an issue through the API.
A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.
That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.
A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.
(cherry picked from commit c524d33402)
Add a SetIssueUpdateDate() function in services/issue.go
That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.
(cherry picked from commit f061caa655)
Add an updated_at field to the API calls related to Issue's Labels.
The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.
(cherry picked from commit ea36cf80f5)
Add an updated_at field to the API call for issue's attachment creation
The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.
(cherry picked from commit 96150971ca)
Checking Issue changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate
- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate
- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate
(cherry picked from commit 4926a5d7a2)
Add an updated_at field to the API call for issue's comment creation
The update date is used as the comment creation date, and is applied to
the issue as the update creation date.
(cherry picked from commit 76c8faecdc)
Add an updated_at field to the API call for issue's comment edition
The update date is used as the comment update date, and is applied to
the issue as an update date.
(cherry picked from commit cf787ad7fd)
Add an updated_at field to the API call for comment's attachment creation
The update date is applied to the comment, and is set as the asset
creation date.
(cherry picked from commit 1e4ff424d3)
Checking Comment changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate
- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate
- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate
(cherry picked from commit da932152f1)
Pettier code to set the update time of comments
Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)
XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.
(cherry picked from commit 1f6a42808d)
Issue edition: Keep the max of the milestone and issue update dates.
When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.
This ensures that a milestone's update date is the max of all issue's
update dates.
(cherry picked from commit 8f22ea182e)
Rewrite the 'AutoDate' tests using subtests
Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.
The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate
(cherry picked from commit 961fd13c55)
(cherry picked from commit d52f4eea44)
(cherry picked from commit 3540ea2a43)
Conflicts:
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade00)
Conflicts:
routers/api/v1/repo/issue_label.go
https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6)
(cherry picked from commit 2030f3b965)
(cherry picked from commit f02aeb7698)
Conflicts:
routers/api/v1/repo/issue_attachment.go
routers/api/v1/repo/issue_comment_attachment.go
https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35)
(cherry picked from commit 8424d0ab3d)
(cherry picked from commit 5cc62caec7)
(cherry picked from commit d6300d5dcd)
[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)
[this is a follow-up to PR #764]
When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.
-----
Comment:
While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...
I'll try to write a functional test, base on models/issues/issue_xref_test.go
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63)
(cherry picked from commit 5110476ee9)
(cherry picked from commit 77ba6be1da)
(cherry picked from commit 9c8337b5c4)
(cherry picked from commit 1d689eb686)
(cherry picked from commit 511c519c87)
(cherry picked from commit 2f0b4a8f61)
(cherry picked from commit fdd4da111c)
[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit c5139a75b9)
- Implements https://codeberg.org/forgejo/discussions/issues/32#issuecomment-918737
- Allows to add Forgejo-specific migrations that don't interfere with Gitea's migration logic. Please do note that we cannot liberally add migrations for Gitea tables, as they might do their own migrations in a future version on that table, and that could undo our migrations. Luckily, we don't have a scenario where that's needed and thus not taken into account.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/795
(cherry picked from commit 8ee32978c0)
(cherry picked from commit c240b34f59)
(cherry picked from commit 03936c6492)
(cherry picked from commit a20ed852f8)
(cherry picked from commit 1dfa82676f)
(cherry picked from commit c39ae0bf8a)
(cherry picked from commit cfaff08996)
(cherry picked from commit 94a458835a)
(cherry picked from commit 61a3cf77df)
(cherry picked from commit abb350fde8)
(cherry picked from commit 5194829d6b)
(cherry picked from commit 89239a60f2)
(cherry picked from commit 683cfd86ef)
(cherry picked from commit f4546cfed9)
(cherry picked from commit 86614d5826)
(cherry picked from commit e4b9c32187)
(cherry picked from commit 8c253719af)
(cherry picked from commit 857365d6c1)
(cherry picked from commit a488b3952f)
(cherry picked from commit 98313c4910)
(cherry picked from commit 430d95e824)
(cherry picked from commit 08bf9d918f)
(cherry picked from commit f8a170e2d0)
(cherry picked from commit d20e325378)
(cherry picked from commit 6c0aa7dd4f)
(cherry picked from commit 46c08c26c7)
(cherry picked from commit 9ee22153c4)
[DB] Ensure forgejo migration up to date (squash)
- Hook Forgejo's `EnsureUpToDate` to Gitea's `EnsureUpToDate`, such that
the Forgejo migrations are also being checked to be up to date.
- I'm not sure how I missed this and if this has caused any problems,
but due to the lack of any open issue about it it seems to not be a big
problem.
(cherry picked from commit 6c65b6dcf6)
(cherry picked from commit 6d45c37d84)
[DB] Add test for TestEnsureUpToDate (squash)
- Add a test for the behavior of `EnsureUpToDate`, to ensure it will
error when needed and succeed when the forgejo version is up to date.
- Add forgejo_migrations package to GO_TEST_PACKAGES, to avoid running
it with `test-unit` and instead test it with `test-*-migration`.
(cherry picked from commit b172a50691)
(cherry picked from commit d8af308820)
(cherry picked from commit e69e64a32c)
(cherry picked from commit 4e8363fad4)
(cherry picked from commit fc9ecd6c53)
(cherry picked from commit e11dcc60f2)
use backticks to avoid backslash
(cherry picked from commit 34212791ee)
(cherry picked from commit bde9473c69)
(cherry picked from commit d4deb43084)
(cherry picked from commit 08e91649b0)
(cherry picked from commit 2b988e5415)
[TESTS] auth LinkAccount test coverage (squash)
(cherry picked from commit a2b2e3066b)
(cherry picked from commit 841d1b5073)
(cherry picked from commit 35da630ad8)
(cherry picked from commit caf2dc4fa7)
(cherry picked from commit 6eb81e67ba)
(cherry picked from commit d59757239f)
(cherry picked from commit 38a121b688)
(cherry picked from commit 20613874ee)
(cherry picked from commit 6d2705e108)
(cherry picked from commit f177b72814)
(cherry picked from commit 75e1fc4c83)
(cherry picked from commit ba64fa9867)
(cherry picked from commit 0b8ab0893e)
(cherry picked from commit 1419d11435)
(cherry picked from commit 38766847e0)
(cherry picked from commit 6f23426a6a)
(cherry picked from commit 9e0ff9ca54)
(cherry picked from commit 353f3601c3)
(cherry picked from commit 6e4ae401d8)
(cherry picked from commit 1a7afe4153)
(cherry picked from commit f9f3e0cc02)
(cherry picked from commit 22fd0337f3)
(cherry picked from commit ee57e138d1)
(cherry picked from commit 21f9b7e73d)
(cherry picked from commit 17c548c092)
Fix https://github.com/go-gitea/gitea/pull/28547#issuecomment-1867740842
Since https://gitea.com/xorm/xorm/pulls/2383 merged, xorm now supports
UPDATE JOIN.
To keep consistent from different databases, xorm use
`engine.Join().Update`, but the actural generated SQL are different
between different databases.
For MySQL, it's `UPDATE talbe1 JOIN table2 ON join_conditions SET xxx
Where xxx`.
For MSSQL, it's `UPDATE table1 SET xxx FROM TABLE1, TABLE2 WHERE
join_conditions`.
For SQLITE per https://www.sqlite.org/lang_update.html, sqlite support
`UPDATE table1 SET xxx FROM table2 WHERE join conditions` from
3.33.0(2020-8-14).
POSTGRES is the same as SQLITE.
This is a regression from #28220 .
`builder.Cond` will not add `` ` `` automatically but xorm method
`Get/Find` adds `` ` ``.
This PR also adds tests to prevent the method from being implemented
incorrectly. The tests are added in `integrations` to test every
database.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This reverts commit b35d3fddfa.
This is totally wrong. I think `Update join` hasn't been supported well
by xorm.
I just revert the PR and will try to send another one.
Using the Go Official tool `golang.org/x/tools/cmd/deadcode@latest`
mentioned by [go blog](https://go.dev/blog/deadcode).
Just use `deadcode .` in the project root folder and it gives a list of
unused functions. Though it has some false alarms.
This PR removes dead code detected in `models/issues`.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
- If a topic has zero repository count, it means that none of the
repositories are using that topic, that would make them 'useless' to
keep. One caveat is that if that topic is going to be used in the
future, it will be added again to the database, but simply with a new
ID.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1964
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Windows-based shells will add a CRLF when piping the token into
ssh-keygen command resulting in
verification error. This resolves#21527.
---------
Co-authored-by: Heiko Besemann <heiko.besemann@qbeyond.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
It will fix#28268 .
<img width="1313" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/cb1e07d5-7a12-4691-a054-8278ba255bfc">
<img width="1318" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/4fd60820-97f1-4c2c-a233-d3671a5039e9">
## ⚠️ BREAKING ⚠️
But need to give up some features:
<img width="1312" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/281c0d51-0e7d-473f-bbed-216e2f645610">
However, such abandonment may fix#28055 .
## Backgroud
When the user switches the dashboard context to an org, it means they
want to search issues in the repos that belong to the org. However, when
they switch to themselves, it means all repos they can access because
they may have created an issue in a public repo that they don't own.
<img width="286" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/182dcd5b-1c20-4725-93af-96e8dfae5b97">
It's a confusing design. Think about this: What does "In your
repositories" mean when the user switches to an org? Repos belong to the
user or the org?
Whatever, it has been broken by #26012 and its following PRs. After the
PR, it searches for issues in repos that the dashboard context user owns
or has been explicitly granted access to, so it causes #28268.
## How to fix it
It's not really difficult to fix it. Just extend the repo scope to
search issues when the dashboard context user is the doer. Since the
user may create issues or be mentioned in any public repo, we can just
set `AllPublic` to true, which is already supported by indexers. The DB
condition will also support it in this PR.
But the real difficulty is how to count the search results grouped by
repos. It's something like "search issues with this keyword and those
filters, and return the total number and the top results. **Then, group
all of them by repo and return the counts of each group.**"
<img width="314" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/5206eb20-f8f5-49b9-b45a-1be2fcf679f4">
Before #26012, it was being done in the DB, but it caused the results to
be incomplete (see the description of #26012).
And to keep this, #26012 implement it in an inefficient way, just count
the issues by repo one by one, so it cannot work when `AllPublic` is
true because it's almost impossible to do this for all public repos.
1bfcdeef4c/modules/indexer/issues/indexer.go (L318-L338)
## Give up unnecessary features
We may can resovle `TODO: use "group by" of the indexer engines to
implement it`, I'm sure it can be done with Elasticsearch, but IIRC,
Bleve and Meilisearch don't support "group by".
And the real question is, does it worth it? Why should we need to know
the counts grouped by repos?
Let me show you my search dashboard on gitea.com.
<img width="1304" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/2bca2d46-6c71-4de1-94cb-0c9af27c62ff">
I never think the long repo list helps anything.
And if we agree to abandon it, things will be much easier. That is this
PR.
## TODO
I know it's important to filter by repos when searching issues. However,
it shouldn't be the way we have it now. It could be implemented like
this.
<img width="1316" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/99ee5f21-cbb5-4dfe-914d-cb796cb79fbe">
The indexers support it well now, but it requires some frontend work,
which I'm not good at. So, I think someone could help do that in another
PR and merge this one to fix the bug first.
Or please block this PR and help to complete it.
Finally, "Switch dashboard context" is also a design that needs
improvement. In my opinion, it can be accomplished by adding filtering
conditions instead of "switching".
