user, topic, project, label, milestone, repository, pull_request,
release, asset, comment, reaction, review providers
Signed-off-by: Earl Warren <contact@earl-warren.org>
Preserve file size when creating attachments
Introduced in c6f5029708
repoList.LoadAttributes has a ctx argument now
Rename `repo.GetOwner` to `repo.LoadOwner`
bd66fa586a
upgrade to the latest gof3
(cherry picked from commit c770713656)
[F3] ID remapping logic is in place, remove workaround
(cherry picked from commit d0fee30167)
[F3] it is experimental, do not enable by default
(cherry picked from commit de325b21d0)
(cherry picked from commit 547e7b3c40)
(cherry picked from commit 820df3a56b)
(cherry picked from commit eaba87689b)
(cherry picked from commit 1b86896b3b)
(cherry picked from commit 0046aac1c6)
(cherry picked from commit f14220df8f)
(cherry picked from commit 559b731001)
(cherry picked from commit 801f7d600d)
(cherry picked from commit 6aa76e9bcf)
(cherry picked from commit a8757dcb07)
[F3] promote F3 users to matching OAuth2 users on first sign-in
(cherry picked from commit bd7fef7496)
(cherry picked from commit 07412698e8)
(cherry picked from commit d143e5b2a3)
[F3] upgrade to gof3 50a6e740ac04
Add new methods GetIDString() & SetIDString() & ToFormatInterface()
Change the prototype of the fixture function
(cherry picked from commit d7b263ff8b)
(cherry picked from commit b3eaf2249d)
(cherry picked from commit d492ddd9bb)
[F3] add GetLocalMatchingRemote with a default implementation
(cherry picked from commit 0a22015039)
(cherry picked from commit f1310c38fb)
(cherry picked from commit deb68552f2)
[F3] GetLocalMatchingRemote for user
(cherry picked from commit e73cb837f5)
(cherry picked from commit a24bc0b85e)
(cherry picked from commit 846a522ecc)
[F3] GetAdminUser now has a ctx argument
(cherry picked from commit 37357a92af)
(cherry picked from commit 660bc1673c)
(cherry picked from commit 72d692a767)
[F3] introduce UserTypeF3
To avoid conflicts should UserTypeRemoteUser be used differently by Gitea
(cherry picked from commit 6de2701bb3)
[F3] user.Put: idempotency
(cherry picked from commit 821e38573c)
(cherry picked from commit f7638f5414)
[F3] upgrade to urfave v2
(cherry picked from commit cc3dbdfd1d)
[F3] update gof3
(cherry picked from commit 2eee960751)
[F3] move f3 under forgejo-cli
* simplify the tests by re-using the forgejo-cli helpers to capture
the output
* unify CmdF3 to be structured in the same way CmdActions is
(cherry picked from commit 4c9fe58b74)
[F3] replace f3 with forgejo-cli f3
(cherry picked from commit 7ba7ceef1b)
[F3] s/ListOptions/Paginator/
[F3] user: add unit tests
[F3] user comparison of F3 managed users is on content
[F3] issue: add unit tests
[F3] gof3 now has one more argument to Put()
[F3] re-use gof3 unit tests for the driver
(cherry picked from commit af7ee6200c)
Conflicts:
tests/integration/integration_test.go
because of some code removed in forgejo-development, trivial
context conflict resolution
[F3] more idempotent tests (#1275)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1275
Co-authored-by: Loïc Dachary <loic@dachary.org>
Co-committed-by: Loïc Dachary <loic@dachary.org>
[F3] tests: do SQL update if nothing changes
[F3] tests comment idempotence
[F3] tests milestone idempotence
[F3] tests pull_request idempotence
[F3] tests release idempotence
[F3] tests asset idempotence
[F3] tests project idempotence
[F3] tests review idempotence
(cherry picked from commit 91038bb4e8)
(cherry picked from commit a7d2a65214)
(cherry picked from commit 59a17e5a34)
[F3] sub command of forgejo-cli
(cherry picked from commit 4d098e9b83)
[F3] implement --quiet, --debug, --verbose
(cherry picked from commit 82e2e17b45)
[F3] fix off by one error when importing repositories
(cherry picked from commit 31689b1397)
[F3] upgrade gof3
(cherry picked from commit 87b8cfe5a1)
[F3] set the logger for all drivers
The logger is set for the local Forgejo driver only. Even when --debug
is specified, the other drivers do not display debug
information. Use the gof3 context to set the logger for all of them at
once.
(cherry picked from commit 8aa7de8ba0)
[F3] the closed date of an issue may be nil
(cherry picked from commit 93d3eaf0b5)
[F3] update gof3 to support system users
there now is a workaround to hardcode system users when they are not
supported by the API
(cherry picked from commit 915484daa7)
(cherry picked from commit b47ac73b8a)
[F3] upgrade gof3 with a version that can deal with system users
When they are missing from what the API returns, it will replace the
missing user with the Ghost user instead of leaving it be a null pointer.
(cherry picked from commit 9eeeab7f8e)
[F3] tests do not need a running Forgejo server
(cherry picked from commit b2b9749ac9)
[F3] upgrade gof3 to correctly fetch PRs from forks
(cherry picked from commit d2448de302)
[F3] upgrade gof3 to resolve incorrect object ID mappings
(cherry picked from commit af8c9de89f)
[F3] mirroring a repository needs --mirror instead of --bare
(cherry picked from commit 9941131920)
[F3] PR create the pull/N/head from the original PR head
It is incorrect to assume they are identical because:
* the IDs of a PR may be remapped and pull/N/head will become
pull/M/head
* the head of a remote fork is a branch named after the fork
(cherry picked from commit 9c220bf23e)
[F3] gof3 upgrade with non overlapping PR references
(cherry picked from commit f1b2f82e7e)
[F3] refactor issue insertion to preserve the creation date
issues_model.NewIssue() is convenient but will override the creation
date. Update the database instead.
(cherry picked from commit 729f4be1e4)
[F3] gof3 upgrade to get performance improvements
(cherry picked from commit 996ac35d4d)
(cherry picked from commit 906e9eb3f5)
(cherry picked from commit c340e22197)
(cherry picked from commit bb0ed72e08)
(cherry picked from commit 500e640d6d)
[F3] TestForgeMethods needs to populate the database
(cherry picked from commit e6da71229f)
(cherry picked from commit e3bd088895)
(cherry picked from commit 2255136187)
(cherry picked from commit 69584b1baf)
(cherry picked from commit bc37771dc3)
(cherry picked from commit 90592146c6)
(cherry picked from commit 6160eb38d9)
(cherry picked from commit 4ed79ea8eb)
(cherry picked from commit 8cb9c266ab)
(cherry picked from commit 7b346e7bb2)
(cherry picked from commit 0345dd562d)
(cherry picked from commit 0f8821c1b1)
[F3] resolve
(cherry picked from commit 2acd211536)
(cherry picked from commit 704317c24e)
(cherry picked from commit b127296da6)
(cherry picked from commit 000b6f823e)
(cherry picked from commit 7bd1b35139)
(cherry picked from commit 6ba434bf2f)
(cherry picked from commit 5c0826c529)
(cherry picked from commit 00f7d12512)
(cherry picked from commit 13550cb0b5)
(cherry picked from commit 3b16d9e114)
(cherry picked from commit 1b0db139d6)
[F3] licenses
(cherry picked from commit 2bccd8c1ef)
(cherry picked from commit a92c48c8c2)
Fixes#27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
This PR removed `unittest.MainTest` the second parameter
`TestOptions.GiteaRoot`. Now it detects the root directory by current
working directory.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
I noticed, that the push mirrors endpoint, is the only endpoint which
returns the times in long format rather than as time.Time().
I think the behavior should be consistent across the project.
----
## ⚠️ BREAKING ⚠️
This PR changes the time format used in API responses for all
push_mirror endpoints which return a push mirror.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This PR adds a new field `RemoteAddress` to both mirror types which
contains the sanitized remote address for easier (database) access to
that information. Will be used in the audit PR if merged.
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Resolves https://codeberg.org/forgejo/forgejo/issues/580
- Return a `upload_field` to any release API response, which points to
the API URL for uploading new assets.
- Adds unit test.
- Adds integration testing to verify URL is returned correctly and that
upload endpoint actually works
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Add a new `CreateSecretOption` struct for creating secrets
- Implement a `CreateOrgSecret` function to create a secret in an
organization
- Add a new route in `api.go` to handle the creation of organization
secrets
- Update the Swagger template to include the new `CreateOrgSecret` API
endpoint
---------
Signed-off-by: appleboy <appleboy.tw@gmail.com>
## Archived labels
This adds the structure to allow for archived labels.
Archived labels are, just like closed milestones or projects, a medium to hide information without deleting it.
It is especially useful if there are outdated labels that should no longer be used without deleting the label entirely.
## Changes
1. UI and API have been equipped with the support to mark a label as archived
2. The time when a label has been archived will be stored in the DB
## Outsourced for the future
There's no special handling for archived labels at the moment.
This will be done in the future.
## Screenshots
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The API should only return the real Mail of a User, if the caller is
logged in. The check do to this don't work. This PR fixes this. This not
really a security issue, but can lead to Spam.
---------
Co-authored-by: silverwind <me@silverwind.io>
- The `NoBetterThan` function can only handle comparisons between
"pending," "success," "error," and "failure." For any other comparison,
we directly return false. This prevents logic errors like the one in
#26121.
- The callers of the `NoBetterThan` function should also avoid making
incomparable calls.
---------
Co-authored-by: yp05327 <576951401@qq.com>
Co-authored-by: puni9869 <80308335+puni9869@users.noreply.github.com>
To avoid deadlock problem, almost database related functions should be
have ctx as the first parameter.
This PR do a refactor for some of these functions.
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
this will allow us to fully localize it later
PS: we can not migrate back as the old value was a one-way conversion
prepare for #25213
---
*Sponsored by Kithara Software GmbH*
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
close https://github.com/go-gitea/gitea/issues/16321
Provided a webhook trigger for requesting someone to review the Pull
Request.
Some modifications have been made to the returned `PullRequestPayload`
based on the GitHub webhook settings, including:
- add a description of the current reviewer object as
`RequestedReviewer` .
- setting the action to either **review_requested** or
**review_request_removed** based on the operation.
- adding the `RequestedReviewers` field to the issues_model.PullRequest.
This field will be loaded into the PullRequest through
`LoadRequestedReviewers()` when `ToAPIPullRequest` is called.
After the Pull Request is merged, I will supplement the relevant
documentation.
The `GetAllCommits` endpoint can be pretty slow, especially in repos
with a lot of commits. The issue is that it spends a lot of time
calculating information that may not be useful/needed by the user.
The `stat` param was previously added in #21337 to address this, by
allowing the user to disable the calculating stats for each commit. But
this has two issues:
1. The name `stat` is rather misleading, because disabling `stat`
disables the Stat **and** Files. This should be separated out into two
different params, because getting a list of affected files is much less
expensive than calculating the stats
2. There's still other costly information provided that the user may not
need, such as `Verification`
This PR, adds two parameters to the endpoint, `files` and `verification`
to allow the user to explicitly disable this information when listing
commits. The default behavior is true.
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
Close#7570
1. Clearly define the wiki path behaviors, see
`services/wiki/wiki_path.go` and tests
2. Keep compatibility with old contents
3. Allow to use dashes in titles, eg: "2000-01-02 Meeting record"
4. Add a "Pages" link in the dropdown, otherwise users can't go to the
Pages page easily.
5. Add a "View original git file" link in the Pages list, even if some
file names are broken, users still have a chance to edit or remove it,
without cloning the wiki repo to local.
6. Fix 500 error when the name contains prefix spaces.
This PR also introduces the ability to support sub-directories, but it
can't be done at the moment due to there are a lot of legacy wiki data,
which use "%2F" in file names.
Co-authored-by: Giteabot <teabot@gitea.io>
Adds API endpoints to manage issue/PR dependencies
* `GET /repos/{owner}/{repo}/issues/{index}/blocks` List issues that are
blocked by this issue
* `POST /repos/{owner}/{repo}/issues/{index}/blocks` Block the issue
given in the body by the issue in path
* `DELETE /repos/{owner}/{repo}/issues/{index}/blocks` Unblock the issue
given in the body by the issue in path
* `GET /repos/{owner}/{repo}/issues/{index}/dependencies` List an
issue's dependencies
* `POST /repos/{owner}/{repo}/issues/{index}/dependencies` Create a new
issue dependencies
* `DELETE /repos/{owner}/{repo}/issues/{index}/dependencies` Remove an
issue dependency
Closes https://github.com/go-gitea/gitea/issues/15393Closes#22115
Co-authored-by: Andrew Thornton <art27@cantab.net>
Fix: #22990
---
Before, the return value of the api is always false,regrardless of
whether the entry of `sync_on_commit` is true or false.
I have confirmed that the value of `sync_on_commit` dropped into the
database is correct.
So, I think it is enough to make some small changes.
Add a new "exclusive" option per label. This makes it so that when the
label is named `scope/name`, no other label with the same `scope/`
prefix can be set on an issue.
The scope is determined by the last occurence of `/`, so for example
`scope/alpha/name` and `scope/beta/name` are considered to be in
different scopes and can coexist.
Exclusive scopes are not enforced by any database rules, however they
are enforced when editing labels at the models level, automatically
removing any existing labels in the same scope when either attaching a
new label or replacing all labels.
In menus use a circle instead of checkbox to indicate they function as
radio buttons per scope. Issue filtering by label ensures that only a
single scoped label is selected at a time. Clicking with alt key can be
used to remove a scoped label, both when editing individual issues and
batch editing.
Label rendering refactor for consistency and code simplification:
* Labels now consistently have the same shape, emojis and tooltips
everywhere. This includes the label list and label assignment menus.
* In label list, show description below label same as label menus.
* Don't use exactly black/white text colors to look a bit nicer.
* Simplify text color computation. There is no point computing luminance
in linear color space, as this is a perceptual problem and sRGB is
closer to perceptually linear.
* Increase height of label assignment menus to show more labels. Showing
only 3-4 labels at a time leads to a lot of scrolling.
* Render all labels with a new RenderLabel template helper function.
Label creation and editing in multiline modal menu:
* Change label creation to open a modal menu like label editing.
* Change menu layout to place name, description and colors on separate
lines.
* Don't color cancel button red in label editing modal menu.
* Align text to the left in model menu for better readability and
consistent with settings layout elsewhere.
Custom exclusive scoped label rendering:
* Display scoped label prefix and suffix with slightly darker and
lighter background color respectively, and a slanted edge between them
similar to the `/` symbol.
* In menus exclusive labels are grouped with a divider line.
---------
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
To avoid duplicated load of the same data in an HTTP request, we can set
a context cache to do that. i.e. Some pages may load a user from a
database with the same id in different areas on the same page. But the
code is hidden in two different deep logic. How should we share the
user? As a result of this PR, now if both entry functions accept
`context.Context` as the first parameter and we just need to refactor
`GetUserByID` to reuse the user from the context cache. Then it will not
be loaded twice on an HTTP request.
But of course, sometimes we would like to reload an object from the
database, that's why `RemoveContextData` is also exposed.
The core context cache is here. It defines a new context
```go
type cacheContext struct {
ctx context.Context
data map[any]map[any]any
lock sync.RWMutex
}
var cacheContextKey = struct{}{}
func WithCacheContext(ctx context.Context) context.Context {
return context.WithValue(ctx, cacheContextKey, &cacheContext{
ctx: ctx,
data: make(map[any]map[any]any),
})
}
```
Then you can use the below 4 methods to read/write/del the data within
the same context.
```go
func GetContextData(ctx context.Context, tp, key any) any
func SetContextData(ctx context.Context, tp, key, value any)
func RemoveContextData(ctx context.Context, tp, key any)
func GetWithContextCache[T any](ctx context.Context, cacheGroupKey string, cacheTargetID any, f func() (T, error)) (T, error)
```
Then let's take a look at how `system.GetString` implement it.
```go
func GetSetting(ctx context.Context, key string) (string, error) {
return cache.GetWithContextCache(ctx, contextCacheKey, key, func() (string, error) {
return cache.GetString(genSettingCacheKey(key), func() (string, error) {
res, err := GetSettingNoCache(ctx, key)
if err != nil {
return "", err
}
return res.SettingValue, nil
})
})
}
```
First, it will check if context data include the setting object with the
key. If not, it will query from the global cache which may be memory or
a Redis cache. If not, it will get the object from the database. In the
end, if the object gets from the global cache or database, it will be
set into the context cache.
An object stored in the context cache will only be destroyed after the
context disappeared.
