- If the session doesn't exist, it shouldn't be expected that the
variable is non-nil. Define the session variable instead and insert that.
- Add unit tests to test the behavior of the database sessions code .
- Regression caused by dd30d9d5c0.
- Resolves https://codeberg.org/forgejo/forgejo/issues/2042
(cherry picked from commit 90307ad200)
(cherry picked from commit 874ef1978d)
(cherry picked from commit 27d5f035fc)
(cherry picked from commit 65dbc4303b)
[GITEA] Fix session generation for database (squash) timeutil.Mock
because of e743570f65 * Refactor timeutil package (#28623)
(cherry picked from commit acc6b51be2)
(cherry picked from commit 02b74317f2)
(cherry picked from commit 63b9b624bd)
(cherry picked from commit 7752ff8baa)
(cherry picked from commit c0af4d9438)
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
(cherry picked from commit 03989418a7)
(cherry picked from commit f50e0dfe5e)
(cherry picked from commit cad9184a36)
(cherry picked from commit e2da5d7fe1)
(cherry picked from commit 3a80534d4d)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da563)
(cherry picked from commit f7535a1cef)
(cherry picked from commit 1a90cd37c3)
(cherry picked from commit d86d71340a)
(cherry picked from commit 9e5cce1afc)
(cherry picked from commit 2013fb3fab)
(cherry picked from commit 88b9d21d11)
(cherry picked from commit 72c020298e)
(cherry picked from commit 6525f730df)
This adds a new `doctor` check: `fix-push-mirrors-without-git-remote`. The new check looks for push mirrors that do not have their remotes configured in git. If automatic fixing is enabled, it will remove these push mirrors from the database.
The check is not run by default, and thus, must be invoked manually. It should be usable in a half-migrated state, too, and as such, fixes#1800.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1853
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 9038e07ef3)
(cherry picked from commit b15bafcbc7)
(cherry picked from commit 93ba05a2dd)
(cherry picked from commit e418ea8082)
(cherry picked from commit 321790a91e)
(cherry picked from commit f4e19d3323)
(cherry picked from commit 4d9923dee8)
(cherry picked from commit 049df69eda)
Conflicts:
services/doctor/push_mirror_consistency.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit c79cba8d55)
(cherry picked from commit f3a3969c02)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
(cherry picked from commit 079b995d49)
(cherry picked from commit 6952ea6ee3)
(cherry picked from commit 6c7d5a5d14)
(cherry picked from commit 49c39f0ed5)
(cherry picked from commit a8f9727388)
Fix gitlab migration unit test
Closes#1837.
The differences in dates can be explained by commit e19b9653ea, which
changed the order in which "created_date" and "updated_date" are
considered.
(cherry picked from commit b0bba20aa4)
Mock HTTP requests in GitLab migration test
This introduces a new utility which can be added to other tests
making HTTP calls to a live service, to cache the responses of this
service in the repository.
(cherry picked from commit 52053b1389)
Enable mocked HTTP responses for GitLab migration test
(cherry picked from commit 19cefc4de2)
Simplify HTTP mocking utility in unit tests
Follow-up to https://codeberg.org/forgejo/forgejo/pulls/1841
(cherry picked from commit ca517c8bb4)
(cherry picked from commit b227e0dd6b)
(cherry picked from commit 6cc9d06556)
(cherry picked from commit f0746e648d)
(cherry picked from commit 414193341b)
(cherry picked from commit 6e93df3bbb)
(cherry picked from commit db0dbab552)
(cherry picked from commit 8f9c9c63fb)
(cherry picked from commit e74e262030)
(cherry picked from commit 2e0933edcf)
(cherry picked from commit 65060c6961)
- When someone really wants to avoid sharing their email, they could
configure git to use the noreply email for git commits. However if they
also wanted to use SSH signing, it would not show up as verified as the
noreply email address was technically not an activated email address for
the user.
- Add unit tests for the `ParseCommitWithSSHSignature` function.
- Resolves https://codeberg.org/Codeberg/Community/issues/946
(cherry picked from commit 1685de7eba)
(cherry picked from commit b1e8858de9)
(cherry picked from commit 1a6bf24d28)
(cherry picked from commit 0122943345)
(cherry picked from commit cc83614853)
(cherry picked from commit 429febe0dc)
(cherry picked from commit 58a9c2ebe9)
(cherry picked from commit fef94aff1c)
(cherry picked from commit 5c6ecd7579)
(cherry picked from commit ffa33a82bf)
(cherry picked from commit a97de1d5bb)
(cherry picked from commit 57ab2b4a40)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828b)
(cherry picked from commit 6487efcb9d)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d997011)
(cherry picked from commit 435a54f140)
(cherry picked from commit 8ec7b3e448)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff)
(cherry picked from commit 19f295c16b)
(cherry picked from commit 3367dcb2cf)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040)
(cherry picked from commit de5bb2a224)
(cherry picked from commit 8f8e52f31a)
(cherry picked from commit e0d5130312)
(cherry picked from commit f1288d6d9b)
(cherry picked from commit 1db4736fd7)
(cherry picked from commit e8dcbb6cd6)
(cherry picked from commit 09625d6476)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad)
(cherry picked from commit 9b7bbae8c4)
(cherry picked from commit f750b71d3d)
(cherry picked from commit f79af36679)
(cherry picked from commit e76eee334e)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8d)
(cherry picked from commit 053dbd3d50)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a)
(cherry picked from commit d48b84f623)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125cc)
(cherry picked from commit 367374ecc3)
Conflicts:
models/user/user_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa4)
(cherry picked from commit 7f12610ff6)
[GITEA] notifies admins on new user registration (squash) DeleteByID
trivial conflict because of
778ad795fd Refactor deletion (#28610)
(cherry picked from commit 05682614e5)
(cherry picked from commit 64bd374803)
(cherry picked from commit 63d086f666)
(cherry picked from commit 3cd48ef4d5)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 6578ec4ed6)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2300
- Databases are one of the most important parts of Forgejo, every
interaction with Forgejo uses the database in one way or another.
Therefore, it is important to maintain the database and recognize when
Forgejo is not doing well with the database. Forgejo already has the
option to log *every* SQL query along with its execution time, but
monitoring becomes impractical for larger instances and takes up
unnecessary storage in the logs.
- Add a QoL enhancement that allows instance administrators to specify a
threshold value beyond which query execution time is logged as a warning
in the xorm logger. The default value is a conservative five seconds to
avoid this becoming a source of spam in the logs.
- The use case for this patch is that with an instance the size of Codeberg, monitoring SQL logs is not very fruitful and most of them are uninteresting. Recently, in the context of persistent deadlock issues (https://codeberg.org/forgejo/forgejo/issues/220), I have noticed that certain queries hold locks on tables like comment and issue for several seconds. This patch helps to identify which queries these are and when they happen.
- Added unit test.
(cherry picked from commit 24bbe7886f)
(cherry picked from commit 6e29145b3c)
(cherry picked from commit 63731e3071)
(cherry picked from commit 3ce1a09736)
(cherry picked from commit a64426907d)
(cherry picked from commit 4b19215691)
(cherry picked from commit e635674435)
(cherry picked from commit 9cf501f1af)
(cherry picked from commit 0d6b934eba)
(cherry picked from commit 4b6c273879)
(cherry picked from commit 89b1315338)
(cherry picked from commit edd8e66ce9)
[GITEA] Add slow SQL query warning (squash) document the setting
(cherry picked from commit ce38599c51)
(cherry picked from commit 794aa67c68)
(cherry picked from commit a4c2c6b004)
(cherry picked from commit 97912752bc)
(cherry picked from commit 00b5327c97)
(cherry picked from commit 1069c860e7)
(cherry picked from commit 84241f42c8)
(cherry picked from commit e4bda0e845)
(cherry picked from commit 7357fb91bf)
(cherry picked from commit a8dd7f6da2)
(cherry picked from commit e636e9f4be)
(cherry picked from commit bf04ae8603)
(cherry picked from commit 93b19e3568)
(cherry picked from commit 83f91363ad)
(cherry picked from commit e34a05bc73)
(cherry picked from commit 68569aeee9)
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda)
(cherry picked from commit 76dffc8621)
(cherry picked from commit ff0615b9d0)
(cherry picked from commit 8712eaa394)
(cherry picked from commit 0c11587582)
(cherry picked from commit 3cbd9fb792)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534c)
(cherry picked from commit d706d9e222)
(cherry picked from commit 6d46261a3f)
(cherry picked from commit f864d18ad3)
(cherry picked from commit 80f8620d0d)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25c)
(cherry picked from commit 63e99df3d1)
(cherry picked from commit b65d777bc7)
(cherry picked from commit 2961f4f632)
(cherry picked from commit f7f723628c)
(cherry picked from commit 9ed7915826)
(cherry picked from commit 8b9ead4608)
(cherry picked from commit 50eeaf1fbc)
(cherry picked from commit ee6f32820e)
(cherry picked from commit bf337bed35)
(cherry picked from commit 6be9501ec0)
(cherry picked from commit b39860570d)
(cherry picked from commit 3f30f486d5)
(cherry picked from commit 5680ecdbe9)
(cherry picked from commit da6a19ad16)
(cherry picked from commit 5462493a77)
(cherry picked from commit 530fe57dde)
(cherry picked from commit f174f35644)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59)
(cherry picked from commit 6e3c0be555)
This solves two bugs. One bug is that due to the JOIN with the
`forgejo_blocked_users` table, duplicated users were generated if a user
had more than one user blocked, this lead to receiving more than one
entry in the actions table. The other bug is that if a user blocked more
than one user, it would still receive a action entry by a
blocked user, because the SQL query would not exclude the other
duplicated users that was generated by the JOIN.
The new solution is somewhat non-optimal in my eyes, but it's better
than rewriting the query to become a potential perfomance blocker (usage
of WHERE IN, which cannot be rewritten to a JOIN). It simply removes the
watchers after it was retrieved by the SQL query.
(cherry picked from commit c63c00b39b)
(cherry picked from commit ad3cdc5705)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480)
(cherry picked from commit 0c32a4fde5)
(cherry picked from commit 1791130e3c)
(cherry picked from commit 37858b7e8f)
(cherry picked from commit a3e2bfd7e9)
(cherry picked from commit 7009b9fe87)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec34791)
(cherry picked from commit e2f1b73752)
[MODERATION] organization blocking a user (#802)
- Resolves#476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a10421)
(cherry picked from commit 37b4e6ef9b)
(cherry picked from commit c17c121f2c)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83c)
(cherry picked from commit 4743eaa6a0)
(cherry picked from commit eff5b43d2e)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed)
(cherry picked from commit b1f3069a22)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7)
(cherry picked from commit 6d754db3e5)
(cherry picked from commit 2a89ddc0ac)
(cherry picked from commit 4a147bff7e)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c339185)
(cherry picked from commit 5a11569a01)
(cherry picked from commit 2373c801ee)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707)
(cherry picked from commit cfa539e590)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c88)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec87016178)
(cherry picked from commit 313e6174d8)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d075)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be13)
(cherry picked from commit f911dc4025)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fda)
(cherry picked from commit 856a2e0903)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e)
(cherry picked from commit d3d88667cb)
(cherry picked from commit 6818de13a9)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a)
(cherry picked from commit d510ea52d0)
(cherry picked from commit 8249e93a14)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d)
(cherry picked from commit 85505e0f81)
(cherry picked from commit 0f3cf17761)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e54)
(cherry picked from commit 1194fe4899)
(cherry picked from commit 9abb95a844)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a3)
(cherry picked from commit 67f37c8346)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b4)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c1)
(cherry picked from commit d3f9134aee)
(cherry picked from commit 7afe154c5c)
(cherry picked from commit 99ac7353eb)
(cherry picked from commit a9cde00c5c)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac330)
(cherry picked from commit a92b4cfeb6)
(cherry picked from commit acaaaf07d9)
(cherry picked from commit 735818863c)
(cherry picked from commit f50fa43b32)
(cherry picked from commit e166836433)
(cherry picked from commit 82a0e4a381)
(cherry picked from commit ff233c19c4)
(cherry picked from commit 8ad87d215f)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba)
(cherry picked from commit 7ee8db0f01)
(cherry picked from commit e4f8b999bc)
(cherry picked from commit 05aea60b13)
(cherry picked from commit dc0d61b012)
(cherry picked from commit f53fa583de)
(cherry picked from commit c65b89a58d)
(cherry picked from commit 69e50b9969)
(cherry picked from commit ec127440b8)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366)
(cherry picked from commit 2776aec7e8)
(cherry picked from commit 1fbde36dc7)
(cherry picked from commit 1293db3c4e)
(cherry picked from commit 6476802175)
(cherry picked from commit 5740f2fc83)
(cherry picked from commit afc12d7b6e)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb)
(cherry picked from commit ed7de91f6a)
(cherry picked from commit 2d97929b9b)
(cherry picked from commit 50d035a7b0)
(cherry picked from commit 0a0c07d78a)
(cherry picked from commit 85e55c4dbc)
(cherry picked from commit d8282122ad)
(cherry picked from commit 3f0b3b6cc5)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596)
(cherry picked from commit f0e3acadd3)
(cherry picked from commit 682c4effe6)
(cherry picked from commit e43c2d84fd)
(cherry picked from commit 9c8e53ccc7)
(cherry picked from commit a9eb7ac783)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40)
(cherry picked from commit aa6e8672f9)
(cherry picked from commit 58c7947e95)
(cherry picked from commit f1aacb1851)
(cherry picked from commit 0bf174af87)
(cherry picked from commit f9706f4335)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea9)
(cherry picked from commit 97b16bc19a)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafd)
(cherry picked from commit 259912e3a6)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032)
(cherry picked from commit a176fee160)
(cherry picked from commit 0480b76dfe)
(cherry picked from commit 4bc06b7b38)
(cherry picked from commit 073094cf72)
(cherry picked from commit ac6201c647)
(cherry picked from commit 7e0812674d)
(cherry picked from commit 068c741e56)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
- Forgejo has the option to delete users, in which all data except
issues and comments are removed, this makes sense in some cases where
users need to be removed cleanly but without removing their existing bug
reports or comments to an discussion. In the case of spammers, admins
have the option to enable purging, where comments are removed.
- Add issues to the list of things to be removed if purge is checked.
- No unit testing, as this gigantic function doesn't have one to begin
with.
- Add integration test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1268
(cherry picked from commit 3ed381c758)
(cherry picked from commit 44d00650ce)
(cherry picked from commit 7f4da82779)
(cherry picked from commit d629314def)
Conflicts:
models/fixtures/issue.yml
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 794dcc218f)
(cherry picked from commit c433f2ecb6)
(cherry picked from commit bb23683f4b)
(cherry picked from commit 634c5604d4)
(cherry picked from commit 219073f5c5)
(cherry picked from commit 32893dbab1)
(cherry picked from commit 0ef40cfb5a)
(cherry picked from commit e535409cab3c276fd8db6b402f85934ef5127491)
(cherry picked from commit 29059f611b)
(cherry picked from commit cd480c5b8b)
(cherry picked from commit 340e657392)
(cherry picked from commit 3a7a5564d0)
(cherry picked from commit 1dbcaca726)
(cherry picked from commit c491c439e2)
(cherry picked from commit c8fe2140cc)
(cherry picked from commit c72564e3ee)
(cherry picked from commit 2084f3fa11)
(cherry picked from commit 918e65327d)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63)
(cherry picked from commit fef1a6dac5)
(cherry picked from commit b0c5165145)
(cherry picked from commit 7ad51b9f8d)
(cherry picked from commit 64f053f383)
(cherry picked from commit f5e78e4c20)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4b)
(cherry picked from commit d955ab3ab0)
(cherry picked from commit 9220088f90)
(cherry picked from commit c73ac63696)
(cherry picked from commit 747a176048)
Conflicts:
models/user/user.go
routers/web/user/setting/account.go
https://codeberg.org/forgejo/forgejo/pulls/2295
This field adds the possibility to set the update date when modifying
an issue through the API.
A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.
That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.
A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.
(cherry picked from commit c524d33402)
Add a SetIssueUpdateDate() function in services/issue.go
That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.
(cherry picked from commit f061caa655)
Add an updated_at field to the API calls related to Issue's Labels.
The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.
(cherry picked from commit ea36cf80f5)
Add an updated_at field to the API call for issue's attachment creation
The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.
(cherry picked from commit 96150971ca)
Checking Issue changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate
- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate
- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate
(cherry picked from commit 4926a5d7a2)
Add an updated_at field to the API call for issue's comment creation
The update date is used as the comment creation date, and is applied to
the issue as the update creation date.
(cherry picked from commit 76c8faecdc)
Add an updated_at field to the API call for issue's comment edition
The update date is used as the comment update date, and is applied to
the issue as an update date.
(cherry picked from commit cf787ad7fd)
Add an updated_at field to the API call for comment's attachment creation
The update date is applied to the comment, and is set as the asset
creation date.
(cherry picked from commit 1e4ff424d3)
Checking Comment changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate
- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate
- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate
(cherry picked from commit da932152f1)
Pettier code to set the update time of comments
Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)
XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.
(cherry picked from commit 1f6a42808d)
Issue edition: Keep the max of the milestone and issue update dates.
When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.
This ensures that a milestone's update date is the max of all issue's
update dates.
(cherry picked from commit 8f22ea182e)
Rewrite the 'AutoDate' tests using subtests
Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.
The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate
(cherry picked from commit 961fd13c55)
(cherry picked from commit d52f4eea44)
(cherry picked from commit 3540ea2a43)
Conflicts:
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade00)
Conflicts:
routers/api/v1/repo/issue_label.go
https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6)
(cherry picked from commit 2030f3b965)
(cherry picked from commit f02aeb7698)
Conflicts:
routers/api/v1/repo/issue_attachment.go
routers/api/v1/repo/issue_comment_attachment.go
https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35)
(cherry picked from commit 8424d0ab3d)
(cherry picked from commit 5cc62caec7)
(cherry picked from commit d6300d5dcd)
[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)
[this is a follow-up to PR #764]
When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.
-----
Comment:
While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...
I'll try to write a functional test, base on models/issues/issue_xref_test.go
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63)
(cherry picked from commit 5110476ee9)
(cherry picked from commit 77ba6be1da)
(cherry picked from commit 9c8337b5c4)
(cherry picked from commit 1d689eb686)
(cherry picked from commit 511c519c87)
(cherry picked from commit 2f0b4a8f61)
(cherry picked from commit fdd4da111c)
[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit c5139a75b9)
(cherry picked from commit c7b572c35d)
(cherry picked from commit aec7503ff6)
(cherry picked from commit 87c65f2a49)
(cherry picked from commit bd47ee33c2)
(cherry picked from commit f3dbd90a74)
- Implements https://codeberg.org/forgejo/discussions/issues/32#issuecomment-918737
- Allows to add Forgejo-specific migrations that don't interfere with Gitea's migration logic. Please do note that we cannot liberally add migrations for Gitea tables, as they might do their own migrations in a future version on that table, and that could undo our migrations. Luckily, we don't have a scenario where that's needed and thus not taken into account.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/795
(cherry picked from commit 8ee32978c0)
(cherry picked from commit c240b34f59)
(cherry picked from commit 03936c6492)
(cherry picked from commit a20ed852f8)
(cherry picked from commit 1dfa82676f)
(cherry picked from commit c39ae0bf8a)
(cherry picked from commit cfaff08996)
(cherry picked from commit 94a458835a)
(cherry picked from commit 61a3cf77df)
(cherry picked from commit abb350fde8)
(cherry picked from commit 5194829d6b)
(cherry picked from commit 89239a60f2)
(cherry picked from commit 683cfd86ef)
(cherry picked from commit f4546cfed9)
(cherry picked from commit 86614d5826)
(cherry picked from commit e4b9c32187)
(cherry picked from commit 8c253719af)
(cherry picked from commit 857365d6c1)
(cherry picked from commit a488b3952f)
(cherry picked from commit 98313c4910)
(cherry picked from commit 430d95e824)
(cherry picked from commit 08bf9d918f)
(cherry picked from commit f8a170e2d0)
(cherry picked from commit d20e325378)
(cherry picked from commit 6c0aa7dd4f)
(cherry picked from commit 46c08c26c7)
(cherry picked from commit 9ee22153c4)
[DB] Ensure forgejo migration up to date (squash)
- Hook Forgejo's `EnsureUpToDate` to Gitea's `EnsureUpToDate`, such that
the Forgejo migrations are also being checked to be up to date.
- I'm not sure how I missed this and if this has caused any problems,
but due to the lack of any open issue about it it seems to not be a big
problem.
(cherry picked from commit 6c65b6dcf6)
(cherry picked from commit 6d45c37d84)
[DB] Add test for TestEnsureUpToDate (squash)
- Add a test for the behavior of `EnsureUpToDate`, to ensure it will
error when needed and succeed when the forgejo version is up to date.
- Add forgejo_migrations package to GO_TEST_PACKAGES, to avoid running
it with `test-unit` and instead test it with `test-*-migration`.
(cherry picked from commit b172a50691)
(cherry picked from commit d8af308820)
(cherry picked from commit e69e64a32c)
(cherry picked from commit 4e8363fad4)
(cherry picked from commit fc9ecd6c53)
(cherry picked from commit e5c446e3dc)
(cherry picked from commit 7066a15655)
(cherry picked from commit 9183cdc835)
(cherry picked from commit 5f93039e0d)
Conflicts:
Makefile
https://codeberg.org/forgejo/forgejo/pulls/2245
(cherry picked from commit a039b3b0c9)
(cherry picked from commit e11dcc60f2)
use backticks to avoid backslash
(cherry picked from commit 34212791ee)
(cherry picked from commit bde9473c69)
(cherry picked from commit d4deb43084)
(cherry picked from commit 08e91649b0)
(cherry picked from commit 2b988e5415)
[TESTS] auth LinkAccount test coverage (squash)
(cherry picked from commit a2b2e3066b)
(cherry picked from commit 841d1b5073)
(cherry picked from commit 35da630ad8)
(cherry picked from commit caf2dc4fa7)
(cherry picked from commit 6eb81e67ba)
(cherry picked from commit d59757239f)
(cherry picked from commit 38a121b688)
(cherry picked from commit 20613874ee)
(cherry picked from commit 6d2705e108)
(cherry picked from commit f177b72814)
(cherry picked from commit 75e1fc4c83)
(cherry picked from commit ba64fa9867)
(cherry picked from commit 0b8ab0893e)
(cherry picked from commit 1419d11435)
(cherry picked from commit 38766847e0)
(cherry picked from commit 6f23426a6a)
(cherry picked from commit 9e0ff9ca54)
(cherry picked from commit 353f3601c3)
(cherry picked from commit 6e4ae401d8)
(cherry picked from commit 1a7afe4153)
(cherry picked from commit f9f3e0cc02)
(cherry picked from commit 22fd0337f3)
(cherry picked from commit ee57e138d1)
(cherry picked from commit 21f9b7e73d)
(cherry picked from commit 17c548c092)
(cherry picked from commit 02d3186517)
(cherry picked from commit f02a040fa2)
(cherry picked from commit 3cf9f82b28)
(cherry picked from commit aa9d06dbac)
(cherry picked from commit 6894213154)
- This also means that if one of the test fails, it will actually
propagate to make and subsequently fail the test.
- Remove the 'delete duplicates issue users' code, I checked this
against my local development database (which contains quite bizarre
cases, even some that Forgejo does not like), my local instance database
and against Codeberg production and they all yielded no results to this
query, so I'm removing it thus resolving the error that the delete code
was not compatible with Mysql.
- Sync all tables that are requires by the migration in the test.
- Resolves#2206
(cherry picked from commit 8e02be7e89)
(cherry picked from commit 006f064416)
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
Emails from Gitea comments do not contain the username of the commenter
anywhere, only their display name, so it is not possible to verify who
made a comment from the email itself:
From: "Alice" <email@gitea>
X-Gitea-Sender: Alice
X-Gitea-Recipient: Bob
X-GitHub-Sender: Alice
X-GitHub-Recipient: Bob
This comment looks like it's from @alice.
The X-Gitea/X-GitHub headers also use display names, which is not very
reliable for filtering, and inconsistent with GitHub's behavior:
X-GitHub-Sender: lunny
X-GitHub-Recipient: gwymor
This change includes both the display name and username in the From
header, and switches the other headers from display name to username:
From: "Alice (@fakealice)" <email@gitea>
X-Gitea-Sender: fakealice
X-Gitea-Recipient: bob
X-GitHub-Sender: fakealice
X-GitHub-Recipient: bob
This comment looks like it's from @alice.
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fixes#22236
---
Error occurring currently while trying to revert commit using read-tree
-m approach:
> 2022/12/26 16:04:43 ...rvices/pull/patch.go:240:AttemptThreeWayMerge()
[E] [63a9c61a] Unable to run read-tree -m! Error: exit status 128 -
fatal: this operation must be run in a work tree
> - fatal: this operation must be run in a work tree
We need to clone a non-bare repository for `git read-tree -m` to work.
bb371aee6e
adds support to create a non-bare cloned temporary upload repository.
After cloning a non-bare temporary upload repository, we [set default
index](https://github.com/go-gitea/gitea/blob/main/services/repository/files/cherry_pick.go#L37)
(`git read-tree HEAD`).
This operation ends up resetting the git index file (see investigation
details below), due to which, we need to call `git update-index
--refresh` afterward.
Here's the diff of the index file before and after we execute
SetDefaultIndex: https://www.diffchecker.com/hyOP3eJy/
Notice the **ctime**, **mtime** are set to 0 after SetDefaultIndex.
You can reproduce the same behavior using these steps:
```bash
$ git clone https://try.gitea.io/me-heer/test.git -s -b main
$ cd test
$ git read-tree HEAD
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
error: Entry '1' not uptodate. Cannot merge.
```
After which, we can fix like this:
```
$ git update-index --refresh
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
```
By clicking the currently active "Open" or "Closed" filter button in the
issue list, the user can toggle that filter off in order to see all
issues regardless of state. The URL "state" parameter will be set to
"all" and the "Open"/"Closed" button will not show as active.
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
Fix https://github.com/go-gitea/gitea/pull/28547#issuecomment-1867740842
Since https://gitea.com/xorm/xorm/pulls/2383 merged, xorm now supports
UPDATE JOIN.
To keep consistent from different databases, xorm use
`engine.Join().Update`, but the actural generated SQL are different
between different databases.
For MySQL, it's `UPDATE talbe1 JOIN table2 ON join_conditions SET xxx
Where xxx`.
For MSSQL, it's `UPDATE table1 SET xxx FROM TABLE1, TABLE2 WHERE
join_conditions`.
For SQLITE per https://www.sqlite.org/lang_update.html, sqlite support
`UPDATE table1 SET xxx FROM table2 WHERE join conditions` from
3.33.0(2020-8-14).
POSTGRES is the same as SQLITE.
This is a regression from #28220 .
`builder.Cond` will not add `` ` `` automatically but xorm method
`Get/Find` adds `` ` ``.
This PR also adds tests to prevent the method from being implemented
incorrectly. The tests are added in `integrations` to test every
database.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This reverts commit b35d3fddfa.
This is totally wrong. I think `Update join` hasn't been supported well
by xorm.
I just revert the PR and will try to send another one.
Using the Go Official tool `golang.org/x/tools/cmd/deadcode@latest`
mentioned by [go blog](https://go.dev/blog/deadcode).
Just use `deadcode .` in the project root folder and it gives a list of
unused functions. Though it has some false alarms.
This PR removes dead code detected in `models/issues`.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
- If a topic has zero repository count, it means that none of the
repositories are using that topic, that would make them 'useless' to
keep. One caveat is that if that topic is going to be used in the
future, it will be added again to the database, but simply with a new
ID.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1964
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Windows-based shells will add a CRLF when piping the token into
ssh-keygen command resulting in
verification error. This resolves#21527.
---------
Co-authored-by: Heiko Besemann <heiko.besemann@qbeyond.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
It will fix#28268 .
<img width="1313" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/cb1e07d5-7a12-4691-a054-8278ba255bfc">
<img width="1318" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/4fd60820-97f1-4c2c-a233-d3671a5039e9">
## ⚠️ BREAKING ⚠️
But need to give up some features:
<img width="1312" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/281c0d51-0e7d-473f-bbed-216e2f645610">
However, such abandonment may fix#28055 .
## Backgroud
When the user switches the dashboard context to an org, it means they
want to search issues in the repos that belong to the org. However, when
they switch to themselves, it means all repos they can access because
they may have created an issue in a public repo that they don't own.
<img width="286" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/182dcd5b-1c20-4725-93af-96e8dfae5b97">
It's a confusing design. Think about this: What does "In your
repositories" mean when the user switches to an org? Repos belong to the
user or the org?
Whatever, it has been broken by #26012 and its following PRs. After the
PR, it searches for issues in repos that the dashboard context user owns
or has been explicitly granted access to, so it causes #28268.
## How to fix it
It's not really difficult to fix it. Just extend the repo scope to
search issues when the dashboard context user is the doer. Since the
user may create issues or be mentioned in any public repo, we can just
set `AllPublic` to true, which is already supported by indexers. The DB
condition will also support it in this PR.
But the real difficulty is how to count the search results grouped by
repos. It's something like "search issues with this keyword and those
filters, and return the total number and the top results. **Then, group
all of them by repo and return the counts of each group.**"
<img width="314" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/5206eb20-f8f5-49b9-b45a-1be2fcf679f4">
Before #26012, it was being done in the DB, but it caused the results to
be incomplete (see the description of #26012).
And to keep this, #26012 implement it in an inefficient way, just count
the issues by repo one by one, so it cannot work when `AllPublic` is
true because it's almost impossible to do this for all public repos.
1bfcdeef4c/modules/indexer/issues/indexer.go (L318-L338)
## Give up unnecessary features
We may can resovle `TODO: use "group by" of the indexer engines to
implement it`, I'm sure it can be done with Elasticsearch, but IIRC,
Bleve and Meilisearch don't support "group by".
And the real question is, does it worth it? Why should we need to know
the counts grouped by repos?
Let me show you my search dashboard on gitea.com.
<img width="1304" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/2bca2d46-6c71-4de1-94cb-0c9af27c62ff">
I never think the long repo list helps anything.
And if we agree to abandon it, things will be much easier. That is this
PR.
## TODO
I know it's important to filter by repos when searching issues. However,
it shouldn't be the way we have it now. It could be implemented like
this.
<img width="1316" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/99ee5f21-cbb5-4dfe-914d-cb796cb79fbe">
The indexers support it well now, but it requires some frontend work,
which I'm not good at. So, I think someone could help do that in another
PR and merge this one to fix the bug first.
Or please block this PR and help to complete it.
Finally, "Switch dashboard context" is also a design that needs
improvement. In my opinion, it can be accomplished by adding filtering
conditions instead of "switching".
When we pick up a job, all waiting jobs should firstly be ordered by
update time,
otherwise when there's a running job, if I rerun an older job, the older
job will run first, as it's id is smaller.
This resolves a problem I encountered while updating gitea from 1.20.4
to 1.21. For some reason (correct or otherwise) there are some values in
`repository.size` that are NULL in my gitea database which cause this
migration to fail due to the NOT NULL constraints.
Log snippet (excuse the escape characters)
```
ESC[36mgitea |ESC[0m 2023-12-04T03:52:28.573122395Z 2023/12/04 03:52:28 ...ations/migrations.go:641:Migrate() [I] Migration[263]: Add git_size and lfs_size columns to repository table
ESC[36mgitea |ESC[0m 2023-12-04T03:52:28.608705544Z 2023/12/04 03:52:28 routers/common/db.go:36:InitDBEngine() [E] ORM engine initialization attempt #3/10 failed. Error: migrate: migration[263]: Add git_size and lfs_size columns to repository table failed: NOT NULL constraint failed: repository.git_size
```
I assume this should be reasonably safe since `repository.git_size` has
a default value of 0 but I don't know if that value being 0 in the odd
situation where `repository.size == NULL` has any problematic
consequences.
- Currently the repository description uses the same sanitizer as a
normal markdown document. This means that element such as heading and
images are allowed and can be abused.
- Create a minimal restricted sanitizer for the repository description,
which only allows what the postprocessor currently allows, which are
links and emojis.
- Added unit testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1202
- Resolves https://codeberg.org/Codeberg/Community/issues/1122
(cherry picked from commit 631c87cc23)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Changed behavior to calculate package quota limit using package `creator
ID` instead of `owner ID`.
Currently, users are allowed to create an unlimited number of
organizations, each of which has its own package limit quota, resulting
in the ability for users to have unlimited package space in different
organization scopes. This fix will calculate package quota based on
`package version creator ID` instead of `package version owner ID`
(which might be organization), so that users are not allowed to take
more space than configured package settings.
Also, there is a side case in which users can publish packages to a
specific package version, initially published by different user, taking
that user package size quota. Version in fix should be better because
the total amount of space is limited to the quota for users sharing the
same organization scope.
System users (Ghost, ActionsUser, etc) have a negative id and may be the
author of a comment, either because it was created by a now deleted user
or via an action using a transient token.
The GetPossibleUserByID function has special cases related to system
users and will not fail if given a negative id.
Refs: https://codeberg.org/forgejo/forgejo/issues/1425
(cherry picked from commit 6a2d2fa243)
Fixes https://codeberg.org/forgejo/forgejo/issues/1458
Some mails such as issue creation mails are missing the reply-to-comment
address. This PR fixes that and specifies which comment types should get
a reply-possibility.
## Bug in Gitea
I ran into this bug when I accidentally used the wrong redirect URL for
the oauth2 provider when using mssql. But the oauth2 provider still got
added.
Most of the time, we use `Delete(&some{id: some.id})` or
`In(condition).Delete(&some{})`, which specify the conditions. But the
function uses `Delete(source)` when `source.Cfg` is a `TEXT` field and
not empty. This will cause xorm `Delete` function not working in mssql.
61ff91f960/models/auth/source.go (L234-L240)
## Reason
Because the `TEXT` field can not be compared in mssql, xorm doesn't
support it according to [this
PR](https://gitea.com/xorm/xorm/pulls/2062)
[related
code](b23798dc98/internal/statements/statement.go (L552-L558))
in xorm
```go
if statement.dialect.URI().DBType == schemas.MSSQL && (col.SQLType.Name == schemas.Text ||
col.SQLType.IsBlob() || col.SQLType.Name == schemas.TimeStampz) {
if utils.IsValueZero(fieldValue) {
continue
}
return nil, fmt.Errorf("column %s is a TEXT type with data %#v which cannot be as compare condition", col.Name, fieldValue.Interface())
}
}
```
When using the `Delete` function in xorm, the non-empty fields will
auto-set as conditions(perhaps some special fields are not?). If `TEXT`
field is not empty, xorm will return an error. I only found this usage
after searching, but maybe there is something I missing.
---------
Co-authored-by: delvh <dev.lh@web.de>
- On user deletion, delete action runners that the user has created.
- Add a database consistency check to remove action runners that have
nonexistent belonging owner.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1720
(cherry picked from commit 009ca7223d)
Co-authored-by: Gusted <postmaster@gusted.xyz>
The steps to reproduce it.
First, create a new oauth2 source.
Then, a user login with this oauth2 source.
Disable the oauth2 source.
Visit users -> settings -> security, 500 will be displayed.
This is because this page only load active Oauth2 sources but not all
Oauth2 sources.
See https://github.com/go-gitea/gitea/pull/27718#issuecomment-1773743014
. Add a test to ensure its behavior.
Why this test uses `ProjectBoardID=0`? Because in `SearchOptions`,
`ProjectBoardID=0` means what it is. But in `IssueOptions`,
`ProjectBoardID=0` means there is no condition, and
`ProjectBoardID=db.NoConditionID` means the board ID = 0.
It's really confusing. Probably it's better to separate the db search
engine and the other issue search code. It's really two different
systems. As far as I can see, `IssueOptions` is not necessary for most
of the code, which has very simple issue search conditions.
1. remove unused function `MoveIssueAcrossProjectBoards`
2. extract the project board condition into a function
3. use db.NoCondition instead of -1. (BTW, the usage of db.NoCondition
is too confusing. Is there any way to avoid that?)
4. remove the unnecessary comment since the ctx refactor is completed.
5. Change `b.ID != 0` to `b.ID > 0`. It's more intuitive but I think
they're the same since board ID can't be negative.
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
Part of https://github.com/go-gitea/gitea/issues/27097:
- `gitea` theme is renamed to `gitea-light`
- `arc-green` theme is renamed to `gitea-dark`
- `auto` theme is renamed to `gitea-auto`
I put both themes in separate CSS files, removing all colors from the
base CSS. Existing users will be migrated to the new theme names. The
dark theme recolor will follow in a separate PR.
## ⚠️ BREAKING ⚠️
1. If there are existing custom themes with the names `gitea-light` or
`gitea-dark`, rename them before this upgrade and update the `theme`
column in the `user` table for each affected user.
2. The theme in `<html>` has moved from `class="theme-name"` to
`data-theme="name"`, existing customizations that depend on should be
updated.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
This PR removed `unittest.MainTest` the second parameter
`TestOptions.GiteaRoot`. Now it detects the root directory by current
working directory.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Partially Fix#25041
This PR redefined the meaning of column `is_active` in table
`action_runner_token`.
Before this PR, `is_active` means whether it has been used by any
runner. If it's true, other runner cannot use it to register again.
In this PR, `is_active` means whether it's validated to be used to
register runner. And if it's true, then it can be used to register
runners until it become false. When creating a new `is_active` register
token, any previous tokens will be set `is_active` to false.
This fixes a performance bottleneck. It was discovered by Codeberg.
Every where query on that table (which has grown big over time) uses
this column, but there is no index on it.
See this part of the log which was posted on Matrix:
```
2023/09/10 00:52:01 ...rs/web/repo/issue.go:1446:ViewIssue() [W] [Slow SQL Query] UPDATE `issue_user` SET is_read=? WHERE uid=? AND issue_id=? [true x y] - 51.395434887s
2023/09/10 00:52:01 ...rs/web/repo/issue.go:1447:ViewIssue() [E] ReadBy: Error 1205 (HY000): Lock wait timeout exceeded; try restarting transaction
2023/09/10 00:52:01 ...eb/routing/logger.go:102:func1() [I] router: completed GET /Codeberg/Community/issues/1201 for [::ffff:xxx]:0, 500 Internal Server Error in 52384.2ms @ repo/issue.go:1256(repo.ViewIssue)
```
Fix the bug on try.gitea.io
```log
2023/09/18 01:48:41 ...ations/migrations.go:635:Migrate() [I] Migration[276]: Add RemoteAddress to mirrors
2023/09/18 01:48:41 routers/common/db.go:34:InitDBEngine() [E] ORM engine initialization attempt #7/10 failed. Error: migrate: migration[276]: Add RemoteAddress to mirrors failed: exit status 128 - fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
- fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
```
Caused by #26952
---------
Co-authored-by: Jason Song <i@wolfogre.com>
