- When the user is not found in `reloadparam`, early return when the
user is not found to avoid calling `IsUserVisibleToViewer` which in turn
avoids causing a NPE.
- This fixes the case that a 500 error and 404 error is shown on the
same page.
- Add integration test for non-existant user RSS.
- Regression by c6366089df
(cherry picked from commit f0e0696278)
(cherry picked from commit 75d8066908)
(cherry picked from commit 4d0a1e0637)
(cherry picked from commit 5f40a485da)
(cherry picked from commit c4cb7812e3)
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
(cherry picked from commit 03989418a7)
(cherry picked from commit f50e0dfe5e)
(cherry picked from commit cad9184a36)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da563)
(cherry picked from commit f7535a1cef)
(cherry picked from commit 1a90cd37c3)
(cherry picked from commit d86d71340a)
(cherry picked from commit 9e5cce1afc)
(cherry picked from commit 2013fb3fab)
(cherry picked from commit 88b9d21d11)
This adds a new `doctor` check: `fix-push-mirrors-without-git-remote`. The new check looks for push mirrors that do not have their remotes configured in git. If automatic fixing is enabled, it will remove these push mirrors from the database.
The check is not run by default, and thus, must be invoked manually. It should be usable in a half-migrated state, too, and as such, fixes#1800.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1853
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 9038e07ef3)
(cherry picked from commit b15bafcbc7)
(cherry picked from commit 93ba05a2dd)
(cherry picked from commit e418ea8082)
(cherry picked from commit 321790a91e)
(cherry picked from commit f4e19d3323)
(cherry picked from commit 4d9923dee8)
(cherry picked from commit 049df69eda)
Conflicts:
services/doctor/push_mirror_consistency.go
https://codeberg.org/forgejo/forgejo/pulls/2214
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
(cherry picked from commit 079b995d49)
(cherry picked from commit 6952ea6ee3)
(cherry picked from commit 6c7d5a5d14)
- Be more liberal in what Forgejo accepts, by reducing the minimum
amount of characters for SHA to 4 characters, which is the minimum
amount that Git needs in order to figure out which commit was meant.
- It's safe to reduce this requirements, as commits are passed to Git
which will error if the given commit ID results in more than one Git
object. Forgejo will catch this error as that the Commit doesn't exist,
which is a error that's already being handled in most places gracefully.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1760
(cherry picked from commit 0d655c7384)
(cherry picked from commit 9b9aca2a02)
(cherry picked from commit 0d0ab1af1f)
(cherry picked from commit d3b352c854)
(cherry picked from commit d6af2094df)
(cherry picked from commit f96e55a7a9)
(cherry picked from commit bb6261f847)
(cherry picked from commit f6a4146161)
(cherry picked from commit ed02921379)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2214
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a4)
(cherry picked from commit c58566403d)
(cherry picked from commit b8b3f6ab8b)
(cherry picked from commit 195520100b)
(cherry picked from commit 6e417087dd)
(cherry picked from commit ff91e5957a)
(cherry picked from commit 6626d5cc75)
(cherry picked from commit 62f8ab793b)
(cherry picked from commit e5bbf1a2d0)
(cherry picked from commit f5b8c8edea)
(cherry picked from commit 50948fa11b)
(cherry picked from commit 83a9f7f442)
Signed-off-by: zareck <cassiomilczareck@gmail.com>
(cherry picked from commit f48e3ff0db)
Removing comments and make command
(cherry picked from commit 7664a423a5)
(cherry picked from commit b2fb435364)
(cherry picked from commit 0a24a819a9)
(cherry picked from commit 155cc19f75)
(cherry picked from commit 223537f71a)
(cherry picked from commit ffbe2970cc)
(cherry picked from commit 836836bd73)
(cherry picked from commit 6b66fe449d)
(cherry picked from commit a3933d9c3a)
(cherry picked from commit f1a49065f2)
(cherry picked from commit 63f4935e7d)
(cherry picked from commit a1acdd76e6)
(cherry picked from commit 7f90256804)
(cherry picked from commit 73620b0e8e)
(cherry picked from commit 587540c818)
(cherry picked from commit 434d5366ac)
(cherry picked from commit e80e193af4)
(cherry picked from commit eb9be4cee6)
(cherry picked from commit f81cfdc935)
(cherry picked from commit ba69a943cb)
(cherry picked from commit ea9bc88248)
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda)
(cherry picked from commit 76dffc8621)
(cherry picked from commit ff0615b9d0)
(cherry picked from commit 8712eaa394)
(cherry picked from commit 0c11587582)
(cherry picked from commit 3cbd9fb792)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534c)
(cherry picked from commit d706d9e222)
(cherry picked from commit 6d46261a3f)
(cherry picked from commit f864d18ad3)
(cherry picked from commit 80f8620d0d)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25c)
(cherry picked from commit 63e99df3d1)
(cherry picked from commit b65d777bc7)
(cherry picked from commit 2961f4f632)
(cherry picked from commit f7f723628c)
(cherry picked from commit 9ed7915826)
(cherry picked from commit 8b9ead4608)
(cherry picked from commit 50eeaf1fbc)
(cherry picked from commit ee6f32820e)
(cherry picked from commit bf337bed35)
(cherry picked from commit 6be9501ec0)
(cherry picked from commit b39860570d)
(cherry picked from commit 3f30f486d5)
(cherry picked from commit 5680ecdbe9)
(cherry picked from commit da6a19ad16)
(cherry picked from commit 5462493a77)
(cherry picked from commit 530fe57dde)
(cherry picked from commit f174f35644)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
[GITEA] Fix cancelled migration deletion modal
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
(cherry picked from commit c38dbd6f88)
(cherry picked from commit 7c07592d01)
(cherry picked from commit 78637af2b6)
[SHARED] make confirmation clearer for dangerous actions
- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.
(cherry picked from commit bf679b24dd)
(cherry picked from commit 1963085dd9)
(cherry picked from commit fb94095d19)
(cherry picked from commit e1d1e46afe)
(cherry picked from commit 93993029e4)
(cherry picked from commit df3b058179)
(cherry picked from commit 8ccc6b9cba)
(cherry picked from commit 9fbe28fca3)
(cherry picked from commit 4ef2be6dc7)
https://codeberg.org/forgejo/forgejo/pulls/1873
Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
avoid conflicts.
(cherry picked from commit 83cae67aa3)
(cherry picked from commit 447009ff56)
(cherry picked from commit 72c0a6150a)
(cherry picked from commit 8ee9c070b9)
(cherry picked from commit 89aba06403)
(cherry picked from commit 798407599f)
(cherry picked from commit 41c9a2606b)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63)
(cherry picked from commit fef1a6dac5)
(cherry picked from commit b0c5165145)
(cherry picked from commit 7ad51b9f8d)
(cherry picked from commit 64f053f383)
(cherry picked from commit f5e78e4c20)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4b)
(cherry picked from commit d955ab3ab0)
(cherry picked from commit 9220088f90)
This field adds the possibility to set the update date when modifying
an issue through the API.
A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.
That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.
A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.
(cherry picked from commit c524d33402)
Add a SetIssueUpdateDate() function in services/issue.go
That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.
(cherry picked from commit f061caa655)
Add an updated_at field to the API calls related to Issue's Labels.
The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.
(cherry picked from commit ea36cf80f5)
Add an updated_at field to the API call for issue's attachment creation
The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.
(cherry picked from commit 96150971ca)
Checking Issue changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate
- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate
- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate
(cherry picked from commit 4926a5d7a2)
Add an updated_at field to the API call for issue's comment creation
The update date is used as the comment creation date, and is applied to
the issue as the update creation date.
(cherry picked from commit 76c8faecdc)
Add an updated_at field to the API call for issue's comment edition
The update date is used as the comment update date, and is applied to
the issue as an update date.
(cherry picked from commit cf787ad7fd)
Add an updated_at field to the API call for comment's attachment creation
The update date is applied to the comment, and is set as the asset
creation date.
(cherry picked from commit 1e4ff424d3)
Checking Comment changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate
- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate
- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate
(cherry picked from commit da932152f1)
Pettier code to set the update time of comments
Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)
XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.
(cherry picked from commit 1f6a42808d)
Issue edition: Keep the max of the milestone and issue update dates.
When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.
This ensures that a milestone's update date is the max of all issue's
update dates.
(cherry picked from commit 8f22ea182e)
Rewrite the 'AutoDate' tests using subtests
Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.
The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate
(cherry picked from commit 961fd13c55)
(cherry picked from commit d52f4eea44)
(cherry picked from commit 3540ea2a43)
Conflicts:
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade00)
Conflicts:
routers/api/v1/repo/issue_label.go
https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6)
(cherry picked from commit 2030f3b965)
(cherry picked from commit f02aeb7698)
Conflicts:
routers/api/v1/repo/issue_attachment.go
routers/api/v1/repo/issue_comment_attachment.go
https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35)
(cherry picked from commit 8424d0ab3d)
(cherry picked from commit 5cc62caec7)
(cherry picked from commit d6300d5dcd)
[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)
[this is a follow-up to PR #764]
When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.
-----
Comment:
While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...
I'll try to write a functional test, base on models/issues/issue_xref_test.go
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63)
(cherry picked from commit 5110476ee9)
(cherry picked from commit 77ba6be1da)
(cherry picked from commit 9c8337b5c4)
(cherry picked from commit 1d689eb686)
(cherry picked from commit 511c519c87)
(cherry picked from commit 2f0b4a8f61)
(cherry picked from commit fdd4da111c)
[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit c5139a75b9)
(cherry picked from commit c7b572c35d)
(cherry picked from commit aec7503ff6)
(cherry picked from commit 87c65f2a49)
The tests at tests/integration/migration-test/migration_test.go will
not run any Forgejo migration when using the gitea-*.sql.gz files
because they do not contain a ForgejoVersion row which is interpreted
as a new Forgejo installation for which there is no need for migration.
Create a situation by which the ForgejoVersion table exists and has a
version of 0 in tests/integration/migration-test/forgejo-v1.19.0.*.sql.gz
thus ensuring all Forgejo migrations are run.
The forgejo*.sql.gz files do not have any Gitea related records, which
will be interpreted by the Gitea migrations as a new installation that
does not need any migration. As a consequence the migration tests run
when using forgejo-v1.19.0.*.sql.gz are exclusively about Forgejo
migrations.
(cherry picked from commit ec8003859c)
(cherry picked from commit 697570ff39)
(cherry picked from commit f041aec172)
(cherry picked from commit 60463e3bab)
(cherry picked from commit b2fc2a7c13)
(cherry picked from commit fb2759b6af)
(cherry picked from commit 37cfc3b227)
(cherry picked from commit 832607500a)
(cherry picked from commit 143d4007b1)
(cherry picked from commit a17e803fbf)
(cherry picked from commit 72ffd49bc3)
(cherry picked from commit 9b92a5fd72)
(cherry picked from commit 0a334d0a9b)
(cherry picked from commit 3add683c94)
(cherry picked from commit 8ed3f3f86b)
(cherry picked from commit 97dc65852b)
(cherry picked from commit e0503cbfea)
(cherry picked from commit f25e6a196b)
(cherry picked from commit cca19c7a4e)
(cherry picked from commit 2c89d7f18c)
(cherry picked from commit 4eb8695c40)
(cherry picked from commit e4c42a68ff)
(cherry picked from commit f76d5e0a82)
It does not pollute the output because they go to sqlite-log/gitea.log
and it may provide clues for debugging. When trying to figure out a
problem in production, Debug is likely to be used but in a development
environment a very fine grain log is the most useful. If that's really
too much noise, the lines can be trimmed by removing all those with [T].
(cherry picked from commit 666b02eb9d)
(cherry picked from commit b69e4d3058)
(cherry picked from commit 0c1aecd7ec)
(cherry picked from commit 0304e41345)
(cherry picked from commit 4bcc7e02ce)
(cherry picked from commit 98364235f2)
(cherry picked from commit ca465e97c1)
(cherry picked from commit 653045ade1)
(cherry picked from commit 9ca2e644ab)
(cherry picked from commit 47c8a05b37)
(cherry picked from commit 4235d929ed)
(cherry picked from commit 10541c4b1c)
(cherry picked from commit c1a0e1eb2f)
(cherry picked from commit 1c20bf30b2)
(cherry picked from commit d4b372db31)
(cherry picked from commit fe3e434299)
(cherry picked from commit d2b544847f)
(cherry picked from commit 059f067a98)
(cherry picked from commit 72ad3d7d7e)
(cherry picked from commit 6037e9a273)
(cherry picked from commit d63aee6921)
(cherry picked from commit 7a0d05f802)
(cherry picked from commit 9b9965b269)
(cherry picked from commit 5ca35d9753)
(cherry picked from commit 9b003f0a0e)
(cherry picked from commit d3769a6cdc)
(cherry picked from commit e11dcc60f2)
use backticks to avoid backslash
(cherry picked from commit 34212791ee)
(cherry picked from commit bde9473c69)
(cherry picked from commit d4deb43084)
(cherry picked from commit 08e91649b0)
(cherry picked from commit 2b988e5415)
[TESTS] auth LinkAccount test coverage (squash)
(cherry picked from commit a2b2e3066b)
(cherry picked from commit 841d1b5073)
(cherry picked from commit 35da630ad8)
(cherry picked from commit caf2dc4fa7)
(cherry picked from commit 6eb81e67ba)
(cherry picked from commit d59757239f)
(cherry picked from commit 38a121b688)
(cherry picked from commit 20613874ee)
(cherry picked from commit 6d2705e108)
(cherry picked from commit f177b72814)
(cherry picked from commit 75e1fc4c83)
(cherry picked from commit ba64fa9867)
(cherry picked from commit 0b8ab0893e)
(cherry picked from commit 1419d11435)
(cherry picked from commit 38766847e0)
(cherry picked from commit 6f23426a6a)
(cherry picked from commit 9e0ff9ca54)
(cherry picked from commit 353f3601c3)
(cherry picked from commit 6e4ae401d8)
(cherry picked from commit 1a7afe4153)
(cherry picked from commit f9f3e0cc02)
(cherry picked from commit 22fd0337f3)
(cherry picked from commit ee57e138d1)
(cherry picked from commit 21f9b7e73d)
(cherry picked from commit 17c548c092)
(cherry picked from commit 02d3186517)
(cherry picked from commit f02a040fa2)
(cherry picked from commit 3cf9f82b28)
(cherry picked from commit c1d14c5fff)
(cherry picked from commit e0e8aabc98)
(cherry picked from commit 392a415070)
(cherry picked from commit c7cf1307ca)
(cherry picked from commit 93b13d092b)
[TESTS] createUser via the user model helper for integration tests (squash)
(cherry picked from commit 6ff2383952)
(cherry picked from commit de2a6fe8c3)
(cherry picked from commit 398a6ab072)
(cherry picked from commit 16abc89780)
(cherry picked from commit 312a3ec5d9)
(cherry picked from commit 85c6d8e290)
(cherry picked from commit 79150d30a4)
(cherry picked from commit 436137962d)
(cherry picked from commit e4eb8d471e)
(cherry picked from commit a7257052f4)
(cherry picked from commit d5eba9a6dd)
(cherry picked from commit d89ef2ffa9)
(cherry picked from commit f1d25aa307)
(cherry picked from commit 60c7c07353)
(cherry picked from commit cfeff3afdb)
(cherry picked from commit 608ac6bd68)
(cherry picked from commit c64e530a13)
(cherry picked from commit 513db02971)
(cherry picked from commit 43eaaa5a61)
(cherry picked from commit 678eb49440)
(cherry picked from commit f7458dabda)
(cherry picked from commit 32568e43b4)
(cherry picked from commit 3fcbb2043d)
(cherry picked from commit 95f0b8eefa)
(cherry picked from commit f285b9469d)
(cherry picked from commit 4b8a02ad08)
(cherry picked from commit 70eb98025b)
(cherry picked from commit dc2d448705)
(cherry picked from commit 20b5669269)
(cherry picked from commit 1574643a6a)
Update semantic version according to specification
(cherry picked from commit 22510f4130)
Mise à jour de 'Makefile'
(cherry picked from commit c3d85d8409)
(cherry picked from commit 5ea2309851)
(cherry picked from commit ec5217b9d1)
(cherry picked from commit 14f08e364b)
(cherry picked from commit b4465c67b8)
[API] [SEMVER] replace number with version
(cherry picked from commit fba48e6497)
(cherry picked from commit 532ec5d878)
[API] [SEMVER] [v1.20] less is replaced by css
(cherry picked from commit 01ca3a4f42)
(cherry picked from commit 1d928c3ab2)
(cherry picked from commit a39dc804cd)
Conflicts:
webpack.config.js
(cherry picked from commit adc68578b3)
(cherry picked from commit 9b8d98475f)
(cherry picked from commit 2516103974)
(cherry picked from commit 18e6287963)
(cherry picked from commit e9694e67ab)
(cherry picked from commit a9763edaf0)
(cherry picked from commit e2b550f4fb)
(cherry picked from commit 2edac36701)
[API] Forgejo API /api/forgejo/v1 (squash)
Update semver as v1.20 is entering release candidate mode
(cherry picked from commit 4995098ec3)
(cherry picked from commit 578ccfdd27)
(cherry picked from commit 1bf6ac0952)
(cherry picked from commit 2fe16b2bfe)
(cherry picked from commit 7cd9d027ee)
(cherry picked from commit eaed4be2ae)
(cherry picked from commit cc94f3115f)
(cherry picked from commit d7a77e35cc)
(cherry picked from commit cd8eb68ab7)
(cherry picked from commit 68487ac95f)
(cherry picked from commit 616dceb565)
(cherry picked from commit 545fe5975b)
(cherry picked from commit c042cf8eda)
(cherry picked from commit ae5e5a7468)
(cherry picked from commit 8034ef5fa2)
(cherry picked from commit aaf0293034)
(cherry picked from commit daafa8ce58)
(cherry picked from commit 7ca3681d3e)
(cherry picked from commit 39f72cba71)
(cherry picked from commit 60a5917130)
(cherry picked from commit 4853bd9e16)
[API] Move forgejo api file (squash)
- Move the file to accommodate faa28b5a44
(cherry picked from commit bce89351d2)
(cherry picked from commit 11ae7f6e85)
(cherry picked from commit 25e96cfcb2)
(cherry picked from commit 6d8d19b391)
(cherry picked from commit 5afc5c454b)
(cherry picked from commit 86d07b4c24)
(cherry picked from commit e54d869fda)
(cherry picked from commit ab31ef1bba)
(cherry picked from commit 511cbca2f3)
(cherry picked from commit 333916fea8)
(cherry picked from commit 3802bcd7c9)
(cherry picked from commit 5d0fa034f7)
(cherry picked from commit d15627aa0d)
(cherry picked from commit a1381d9146fba42cb97d72d38525fa3e721bfb03)
(cherry picked from commit 74714e0246)
(cherry picked from commit 7749dbfe66)
(cherry picked from commit 4379249711)
(cherry picked from commit a69f55bebf)
(cherry picked from commit 24dd5fbfdb)
(cherry picked from commit dda856d6b8)
(cherry picked from commit bc14f4fa97)
(cherry picked from commit 78fef4f137)
(cherry picked from commit 69e013cc51)
(cherry picked from commit f173c6a273)
(cherry picked from commit 92f9d02547)
(cherry picked from commit c99d51e665)
(cherry picked from commit aa0650fd2b)
(cherry picked from commit 0a8ef91302)
(cherry picked from commit 7b54fe01c2)
(cherry picked from commit 0e154f366f)
(cherry picked from commit 02d88ee16d)
(cherry picked from commit 411924e017)
(cherry picked from commit f4e9ca6db5)
(cherry picked from commit cd80126a23)
(cherry picked from commit da626702f9)
(cherry picked from commit 4b81d0bd04)
(cherry picked from commit 53ac260669)
Git 2.43.0 will not detect a git repository as valid without refs/
subdirectory present. `git gc` cleans this up and puts it in
packed-refs. We must keep refs/ non-empty.
Fix `Uploaded artifacts should be overwritten`
https://github.com/go-gitea/gitea/issues/28549
When upload different content to uploaded artifact, it checks that
content size is not match in db record with previous artifact size, then
the new artifact is refused.
Now if it finds uploading content size is not matching db record when
receiving chunks, it updates db records to follow the latest size value.
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#22236
---
Error occurring currently while trying to revert commit using read-tree
-m approach:
> 2022/12/26 16:04:43 ...rvices/pull/patch.go:240:AttemptThreeWayMerge()
[E] [63a9c61a] Unable to run read-tree -m! Error: exit status 128 -
fatal: this operation must be run in a work tree
> - fatal: this operation must be run in a work tree
We need to clone a non-bare repository for `git read-tree -m` to work.
bb371aee6e
adds support to create a non-bare cloned temporary upload repository.
After cloning a non-bare temporary upload repository, we [set default
index](https://github.com/go-gitea/gitea/blob/main/services/repository/files/cherry_pick.go#L37)
(`git read-tree HEAD`).
This operation ends up resetting the git index file (see investigation
details below), due to which, we need to call `git update-index
--refresh` afterward.
Here's the diff of the index file before and after we execute
SetDefaultIndex: https://www.diffchecker.com/hyOP3eJy/
Notice the **ctime**, **mtime** are set to 0 after SetDefaultIndex.
You can reproduce the same behavior using these steps:
```bash
$ git clone https://try.gitea.io/me-heer/test.git -s -b main
$ cd test
$ git read-tree HEAD
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
error: Entry '1' not uptodate. Cannot merge.
```
After which, we can fix like this:
```
$ git update-index --refresh
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
```
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Make use of the `form-fetch-action` for the merge button, which will
automatically prevent the action from happening multiple times and show
a nice loading indicator as user feedback while the merge request is
being processed by the server.
- Adjust the merge PR code to JSON response as this is required for the
`form-fetch-action` functionality.
- Resolves https://codeberg.org/forgejo/forgejo/issues/774
- Likely resolves the cause of
https://codeberg.org/forgejo/forgejo/issues/1688#issuecomment-1313044
(cherry picked from commit 4ec64c19507caefff7ddaad722b1b5792b97cc5a)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
Gitea prefers to use relative URLs in code (to make multiple domain work
for some users)
So it needs to use `toAbsoluteUrl` to generate a full URL when click
"Reference in New Issues"
And add some comments in the test code
