releated to #21820
- Split `Size` in repository table as two new colunms, one is `GitSize`
for git size, the other is `LFSSize` for lfs data. still store full size
in `Size` colunm.
- Show full size on ui, but show each of them by a `title`; example:
- Return full size in api response.
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: DmitryFrolovTri <23313323+DmitryFrolovTri@users.noreply.github.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25451.
Bugfixes:
- When stopping the zombie or endless tasks, set `LogInStorage` to true
after transferring the file to storage. It was missing, it could write
to a nonexistent file in DBFS because `LogInStorage` was false.
- Always update `ActionTask.Updated` when there's a new state reported
by the runner, even if there's no change. This is to avoid the task
being judged as a zombie task.
Enhancement:
- Support `Stat()` for DBFS file.
- `WriteLogs` refuses to write if it could result in content holes.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
More fix for #24981
* #24981Close#22361
* #22361
There were many patches for Gitea's sub-commands to satisfy the facts:
* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs
That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.
In the future, the sub-command system should be refactored to a clear
solution.
----
Other changes:
* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
Fix#25481
The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".
Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)
ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
Fix regression of #25174.
The `Init` of the db indexer should return true to indicate that the
index was opened/existed, or the indexer will try to populate the index
(not really populate, just fill the queue, `Index` method of the db
indexer is a dummy).
Refactor `modules/indexer` to make it more maintainable. And it can be
easier to support more features. I'm trying to solve some of issue
searching, this is a precursor to making functional changes.
Current supported engines and the index versions:
| engines | issues | code |
| - | - | - |
| db | Just a wrapper for database queries, doesn't need version | - |
| bleve | The version of index is **2** | The version of index is **6**
|
| elasticsearch | The old index has no version, will be treated as
version **0** in this PR | The version of index is **1** |
| meilisearch | The old index has no version, will be treated as version
**0** in this PR | - |
## Changes
### Split
Splited it into mutiple packages
```text
indexer
├── internal
│ ├── bleve
│ ├── db
│ ├── elasticsearch
│ └── meilisearch
├── code
│ ├── bleve
│ ├── elasticsearch
│ └── internal
└── issues
├── bleve
├── db
├── elasticsearch
├── internal
└── meilisearch
```
- `indexer/interanal`: Internal shared package for indexer.
- `indexer/interanal/[engine]`: Internal shared package for each engine
(bleve/db/elasticsearch/meilisearch).
- `indexer/code`: Implementations for code indexer.
- `indexer/code/internal`: Internal shared package for code indexer.
- `indexer/code/[engine]`: Implementation via each engine for code
indexer.
- `indexer/issues`: Implementations for issues indexer.
### Deduplication
- Combine `Init/Ping/Close` for code indexer and issues indexer.
- ~Combine `issues.indexerHolder` and `code.wrappedIndexer` to
`internal.IndexHolder`.~ Remove it, use dummy indexer instead when the
indexer is not ready.
- Duplicate two copies of creating ES clients.
- Duplicate two copies of `indexerID()`.
### Enhancement
- [x] Support index version for elasticsearch issues indexer, the old
index without version will be treated as version 0.
- [x] Fix spell of `elastic_search/ElasticSearch`, it should be
`Elasticsearch`.
- [x] Improve versioning of ES index. We don't need `Aliases`:
- Gitea does't need aliases for "Zero Downtime" because it never delete
old indexes.
- The old code of issues indexer uses the orignal name to create issue
index, so it's tricky to convert it to an alias.
- [x] Support index version for meilisearch issues indexer, the old
index without version will be treated as version 0.
- [x] Do "ping" only when `Ping` has been called, don't ping
periodically and cache the status.
- [x] Support the context parameter whenever possible.
- [x] Fix outdated example config.
- [x] Give up the requeue logic of issues indexer: When indexing fails,
call Ping to check if it was caused by the engine being unavailable, and
only requeue the task if the engine is unavailable.
- It is fragile and tricky, could cause data losing (It did happen when
I was doing some tests for this PR). And it works for ES only.
- Just always requeue the failed task, if it caused by bad data, it's a
bug of Gitea which should be fixed.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
this will allow us to fully localize it later
PS: we can not migrate back as the old value was a one-way conversion
prepare for #25213
---
*Sponsored by Kithara Software GmbH*
In modern days, there is no reason to make users set "charset" anymore.
Close#25378
## ⚠️ BREAKING
The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close#24818Close#24222Close#21606Close#21498Close#25107Close#24981
Maybe close#24503
Replace #23301
Replace #22754
And maybe more
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.
Ideally we should refactor the INI package to a clear solution, but it's
a huge work.
A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.
Partially fix#25377, the "install" page needs more fine tunes.
### Summary
Extend the template variable substitution to replace file paths. This
can be helpful for setting up log files & directories that should match
the repository name.
### PR Changes
- Move files matching glob pattern when setting up repos from template
- For security, added ~escaping~ sanitization for cross-platform support
and to prevent directory traversal (thanks @silverwind for the
reference)
- Added unit testing for escaping function
- Fixed the integration tests for repo template generation by passing
the repo_template_id
- Updated the integration testfiles to add some variable substitution &
assert the outputs
I had to fix the existing repo template integration test and extend it
to add a check for variable substitutions.
Example:
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The plan is that all built-in auth providers use inline SVG for more
flexibility in styling and to get the GitHub icon to follow
`currentcolor`. This only removes the `public/img/auth` directory and
adds the missing svgs to our svg build.
It should map the built-in providers to these SVGs and render them. If
the user has set a Icon URL, it should render that as an `img` tag
instead.
```
gitea-azure-ad
gitea-bitbucket
gitea-discord
gitea-dropbox
gitea-facebook
gitea-gitea
gitea-gitlab
gitea-google
gitea-mastodon
gitea-microsoftonline
gitea-nextcloud
gitea-twitter
gitea-yandex
octicon-mark-github
```
GitHub logo is now white again on dark theme:
<img width="431" alt="Screenshot 2023-06-12 at 21 45 34"
src="https://github.com/go-gitea/gitea/assets/115237/27a43504-d60a-4132-a502-336b25883e4d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#25160.
`data-source-position` of checkboxes in a task list was incorrect
whenever there was YAML front matter. This would result in issue content
or PR descriptions getting corrupted with random `x` or space characters
when a user checked or unchecked a task.
If redirect_to parameter has set value starting with `\\example.com`
redirect will be created with header `Location: /\\example.com` that
will redirect to example.com domain.
Fixes some issues with the swagger documentation for the new multiple
files API endpoint (#24887) which were overlooked when submitting the
original PR:
1. add some missing parameter descriptions
2. set correct `required` option for required parameters
3. change endpoint description to match it full functionality (every
kind of file modification is supported, not just creating and updating)
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Before, Gitea shows the database table stats on the `admin dashboard`
page.
It has some problems:
* `count(*)` is quite heavy. If tables have many records, this blocks
loading the admin page blocks for a long time
* Some users had even reported issues that they can't visit their admin
page because this page causes blocking or `50x error (reverse proxy
timeout)`
* The `actions` stat is not useful. The table is simply too large. Does
it really matter if it contains 1,000,000 rows or 9,999,999 rows?
* The translation `admin.dashboard.statistic_info` is difficult to
maintain.
So, this PR uses a separate page to show the stats and removes the
`actions` stat.
## ⚠️ BREAKING
The `actions` Prometheus metrics collector has been removed for the
reasons mentioned beforehand.
Please do not rely on its output anymore.
The INI package has many bugs and quirks, and in fact it is
unmaintained.
This PR is the first step for the INI package refactoring:
* Use Gitea's "config_provider" to provide INI access
* Deprecate the INI package by golangci.yml rule
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.
## ⚠️ BREAKING
You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
The admin config page has been broken for many many times, a little
refactoring would make this page panic.
So, add a test for it, and add another test to cover the 500 error page.
Co-authored-by: Giteabot <teabot@gitea.io>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves#14619
gitea.com experienced the corrupted LevelQueue bug again.
I think the problem is clear now: if the keys in LevelDB went
out-of-sync, the LevelQueue itself doesn't have the ability to recover,
eg:
* LevelQueue.Len() reports 100
* LevelQueue.LPop() reports ErrNotFound = errors.New("no key found")
So it needs to dive into the LevelDB to remove all keys to recover the
corrupted LevelQueue.
More comments are in TestCorruptedLevelQueue.
As discussed in
https://github.com/go-gitea/gitea/pull/24953#issuecomment-1565630156.
## ⚠️ BREAKING ⚠️
1. The `ui.THEME_COLOR_META_TAG` setting has been removed. If you still
need to set the `theme-color` meta tag, add it via
`$GITEA_CUSTOM/templates/custom/header.tmpl` instead.
2. The non-standard `default-theme` meta-tag added in
https://github.com/go-gitea/gitea/pull/13809 has been removed. Third
party code that needs to obtain the currently loaded theme should use
the `theme-<name>` class on the `<html>` node instead, which reflect the
currently active theme.
The old EventWriter's Run does:
```go
for {
handlePause()
select {
case event <- Queue:
write the log event ...
}
}
```
So, if an event writer is started before the logger is paused, there is
a chance that the logger isn't paused for the first message.
The new logic is:
```go
for {
select {
case event <- Queue:
handlePause()
write the log event ...
}
}
```
Then the event writer can be correctly paused
The old process manager's `Trace` function by default calls `log.Printf`
to output "trace" level logs. That's not ideal because by default the
trace level logs should not be outputted. In history it didn't cause
problems because there was no other call to the process manager before
the logger system's initialization.
But if there is any package using the process manager before the "Trace"
function gets assigned to the logger system's trace function, the
process manager will outputs unexpected verbose messages, this behavior
is not expected in most cases.
Now, the logger system also uses process manager to manage its goroutine
contexts, so it's the time to fix the old "trace" behavior: by default,
do not output the trace level messages. Fix#24951
Before there was a "graceful function": RunWithShutdownFns, it's mainly
for some modules which doesn't support context.
The old queue system doesn't work well with context, so the old queues
need it.
After the queue refactoring, the new queue works with context well, so,
use Golang context as much as possible, the `RunWithShutdownFns` could
be removed (replaced by RunWithCancel for context cancel mechanism), the
related code could be simplified.
This PR also fixes some legacy queue-init problems, eg:
* typo : archiver: "unable to create codes indexer queue" => "unable to
create repo-archive queue"
* no nil check for failed queues, which causes unfriendly panic
After this PR, many goroutines could have better display name:
This PR replaces all string refName as a type `git.RefName` to make the
code more maintainable.
Fix#15367
Replaces #23070
It also fixed a bug that tags are not sync because `git remote --prune
origin` will not remove local tags if remote removed.
We in fact should use `git fetch --prune --tags origin` but not `git
remote update origin` to do the sync.
Some answer from ChatGPT as ref.
> If the git fetch --prune --tags command is not working as expected,
there could be a few reasons why. Here are a few things to check:
>
>Make sure that you have the latest version of Git installed on your
system. You can check the version by running git --version in your
terminal. If you have an outdated version, try updating Git and see if
that resolves the issue.
>
>Check that your Git repository is properly configured to track the
remote repository's tags. You can check this by running git config
--get-all remote.origin.fetch and verifying that it includes
+refs/tags/*:refs/tags/*. If it does not, you can add it by running git
config --add remote.origin.fetch "+refs/tags/*:refs/tags/*".
>
>Verify that the tags you are trying to prune actually exist on the
remote repository. You can do this by running git ls-remote --tags
origin to list all the tags on the remote repository.
>
>Check if any local tags have been created that match the names of tags
on the remote repository. If so, these local tags may be preventing the
git fetch --prune --tags command from working properly. You can delete
local tags using the git tag -d command.
---------
Co-authored-by: delvh <dev.lh@web.de>
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
1. non-dev mode is treated as prod mode, to protect users from
accidentally running in dev mode if there is a typo in this value.
2. in dev mode, do not need to really exit if there are template errors,
because the template errors could be fixed by developer soon and the
templates get reloaded, help:
* https://github.com/go-gitea/gitea/issues/24845#issuecomment-1557615382
3. Fine tune the mail template loading message.
close https://github.com/go-gitea/gitea/issues/16321
Provided a webhook trigger for requesting someone to review the Pull
Request.
Some modifications have been made to the returned `PullRequestPayload`
based on the GitHub webhook settings, including:
- add a description of the current reviewer object as
`RequestedReviewer` .
- setting the action to either **review_requested** or
**review_request_removed** based on the operation.
- adding the `RequestedReviewers` field to the issues_model.PullRequest.
This field will be loaded into the PullRequest through
`LoadRequestedReviewers()` when `ToAPIPullRequest` is called.
After the Pull Request is merged, I will supplement the relevant
documentation.
Fix#24896
If users set different languages by `linguist-language`, the `stats` map
could be: `java: 100, Java: 200`.
Language stats are stored as case-insensitive in database and there is a
unique key.
So, the different language names should be merged to one unique name:
`Java: 300`
Replace #19857Close#19856Close#10311Close#10123
Major changes:
1. Move a lot of code from `environment-to-ini.go` to `config_env.go` to
make them testable.
2. Add `__FILE` support
3. Update documents
4. Add tests
Close#13454 , Close#23255, Close#14697 (and maybe more related
issues)
Many users have the requirement to customize the git config. This PR
introduces an easy way: put the options in Gitea's app.ini
`[git.config]`, then the config options will be applied to git config.
And it can support more flexible default config values, eg: now
`diff.algorithm=histogram` by default. According to:
https://stackoverflow.com/a/32367597/4754037 , `histogram diff` is
efficient and doesn't like to cause server-side problems.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#24882
The goroutines are all asynchronized. So it needs a little "sleep" to
make sure the writer's goroutine has been paused before sending messages
to it.
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#24856
Rename "context.contextKey" to "context.WebContextKey", this context is
for web context only. But the Context itself is not renamed, otherwise
it would cause a lot of changes (if we really want to rename it, there
could be a separate PR).
The old test code doesn't really test, the "install page" gets broken
not only one time, so use new test code to make sure the "install page"
could work.
Replace #20257 (which is stale and incomplete)
Close#20255
Major changes:
* Deprecate the "WHITELIST", use "ALLOWLIST"
* Add wildcard support for EMAIL_DOMAIN_ALLOWLIST/EMAIL_DOMAIN_BLOCKLIST
* Update example config file and document
* Improve tests
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This change makes the CSS for `<video>` in markup match that of `<img>`,
and also allows additional attributes to be used. This way the width,
padding, alignment should work equally well for both.
Replace #16455Close#21803
Mixing different Gitea contexts together causes some problems:
1. Unable to respond proper content when error occurs, eg: Web should
respond HTML while API should respond JSON
2. Unclear dependency, eg: it's unclear when Context is used in
APIContext, which fields should be initialized, which methods are
necessary.
To make things clear, this PR introduces a Base context, it only
provides basic Req/Resp/Data features.
This PR mainly moves code. There are still many legacy problems and
TODOs in code, leave unrelated changes to future PRs.
This PR
- [x] Move some functions from `issues.go` to `issue_stats.go` and
`issue_label.go`
- [x] Remove duplicated issue options `UserIssueStatsOption` to keep
only one `IssuesOptions`
Regression of #24536. If the user doesn't explicitly disable Actions, it
will be enabled.
1. Gitea will call `loadRepositoryFrom` before `loadActionsFrom`.
25d4f95df2/modules/setting/setting.go (L234-L237)
2. In `loadRepositoryFrom`,
`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` will set
`actions.ENABLED` with `true`.
25d4f95df2/modules/setting/repository.go (L313-L315)
3. In `loadActionsFrom`, `rootCfg.Section("actions")` will get a section
with Actions enabled.
25d4f95df2/modules/setting/actions.go (L23-L26)
Although the cause of the problem was using `true` by copy-paste
mistake, it also surprised me that
**`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` doesn't
only read, but also write.**
Make mailer SMTP check have timed context
Otherwise Gitea may block for long time if the DNS request blocks.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This PR adds support for the systemd notify protocol. Several status
messagess are provided. We should likely add a common notify/status
message for graceful.
Replaces #21140
Signed-off-by: Andrew Thornton <art27@cantab.net>
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: ltdk <usr@ltdk.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
minio storage iterator shows different behavior with local fs iterator.
in local fs storage:
``` go
s.IterateObjects("prefix", func(path,obj)
println(path) // show "prefix/xxx.file"
})
```
in minio storage:
```go
s.IterateObjects("prefix", func(path,obj)
println(path) // show "xxx.file"
})
```
I think local fs is correct, minio use wrong `basePath` to trim storage
path prefix.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
`http.ServeFile/ServeContent` handles `If-xxx`, `Content-Length`,
`Range` and `Etag` correctly
After this PR, storage files (eg: avatar) could be responded with
correct Content-Length.
fix#12192 Support SSH for go get
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
Although some features are mixed together in this PR, this PR is not
that large, and these features are all related.
Actually there are more than 70 lines are for a toy "test queue", so
this PR is quite simple.
Major features:
1. Allow site admin to clear a queue (remove all items in a queue)
* Because there is no transaction, the "unique queue" could be corrupted
in rare cases, that's unfixable.
* eg: the item is in the "set" but not in the "list", so the item would
never be able to be pushed into the queue.
* Now site admin could simply clear the queue, then everything becomes
correct, the lost items could be re-pushed into queue by future
operations.
3. Split the "admin/monitor" to separate pages
4. Allow to download diagnosis report
* In history, there were many users reporting that Gitea queue gets
stuck, or Gitea's CPU is 100%
* With diagnosis report, maintainers could know what happens clearly
The diagnosis report sample:
[gitea-diagnosis-20230510-192913.zip](https://github.com/go-gitea/gitea/files/11441346/gitea-diagnosis-20230510-192913.zip)
, use "go tool pprof profile.dat" to view the report.
Screenshots:
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Replaces #24641
Currently, unit tests fail when run locally (unless users have minio
instance running). This PR only requires redis unit tests if in CI.
- Only run redis unit tests when `CI` env variable is set
- Add minio as a service in unit tests actions
According to the discussion with DanielGibson, the default "20m" seems
too short. It would make LFS fail if the file is large / network is
slow.
I think relaxing this timeout doesn't have side affect. So change the
default value to 24h, IMO that should be long enough.
## ⚠️ BREAKING
If admins want the previous timeout, they should set the setting
`[server].LFS_HTTP_AUTH_EXPIRY`.
#### Added
- API: Create a branch directly from commit on the create branch API
- Added `old_ref_name` parameter to allow creating a new branch from a
specific commit, tag, or branch.
- Deprecated `old_branch_name` parameter in favor of the new
`old_ref_name` parameter.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
1. Remove unused fields/methods in web context.
2. Make callers call target function directly instead of the light
wrapper like "IsUserRepoReaderSpecific"
3. The "issue template" code shouldn't be put in the "modules/context"
package, so move them to the service package.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
The "modules/context.go" is too large to maintain.
This PR splits it to separate files, eg: context_request.go,
context_response.go, context_serve.go
This PR will help:
1. The future refactoring for Gitea's web context (eg: simplify the context)
2. Introduce proper "range request" support
3. Introduce context function
This PR only moves code, doesn't change any logic.
Due to #24409 , we can now specify '--not' when getting all commits from
a repo to exclude commits from a different branch.
When I wrote that PR, I forgot to also update the code that counts the
number of commits in the repo. So now, if the --not option is used, it
may return too many commits, which can indicate that another page of
data is available when it is not.
This PR passes --not to the commands that count the number of commits in
a repo
Help some users like #16832#1851
There are many users reporting similar problem: if the SECRET_KEY
mismatches, some operations (like 2FA login) only reports unclear 500
error and unclear "base64 decode error" log （some maintainers ever spent
a lot of time on debugging such problem)
The SECRET_KEY was not well-designed and it is also a kind of technical
debt. Since it couldn't be fixed easily, it's good to add clearer error
messages, then at least users could know what the real problem is.
---------
Co-authored-by: delvh <dev.lh@web.de>
This gives more "freshness" to the explore page. So it's not just the
same X users on the explore page by default, now it matches the same
sort as the repos on the explore page.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Replace #22117. Implement it in a more maintainable way.
Some licenses have placeholders e.g. the BSD licenses start with this
line:
```
Copyright (c) <year> <owner>.
```
This PR replaces the placeholders with the correct value when initialize
a new repo.
### FAQ
- Why not use a regex?
It will be a pretty complicated regex which could be hard to maintain.
- There're still missing placeholders.
There are over 500 licenses, it's impossible for anyone to inspect all
of them alone. Please help to add them if you find any, and it is also
OK to leave them for the future.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
close#24449
The unit of `Actions` should be contorlled not only by
`repository.DISABLED_REPO_UNITS` but also by `actions.ENABLED`
in the `app.ini`.
Previously, the permission of the team's `Actions` unit was not
controlled by `actions.Enabled`. So, even if the user sets
`actions.Enabled` to false, he can still select the permission of the
`Actions` unit for the team.
This PR makes the permissions of the team's `Actions` unit also
controlled by `actions.Enabled`. Just append`TypeActions` into
`DisabledRepoUnits` slice when initializing if `actions.Enabled` is
false.
### Changes:
If `Actions` is set disbaled in `app.ini`, like below:
```yaml
[actions]
ENABLED = false
```
1. If user try to create/edit a team, will prompt user that `Actions` is disabled.
2. `actions` is not displayed in the sidebar on the team details page
Partially for #24457
Major changes:
1. The old `signedUserNameStringPointerKey` is quite hacky, use
`ctx.Data[SignedUser]` instead
2. Move duplicate code from `Contexter` to `CommonTemplateContextData`
3. Remove incorrect copying&pasting code `ctx.Data["Err_Password"] =
true` in API handlers
4. Use one unique `RenderPanicErrorPage` for panic error page rendering
5. Move `stripSlashesMiddleware` to be the first middleware
6. Install global panic recovery handler, it works for both `install`
and `web`
7. Make `500.tmpl` only depend minimal template functions/variables,
avoid triggering new panics
Screenshot:
<details>
</details>
The ordering of the final token causing a close of the queue in this
test may be out of sync due to concurrency. Instead just use ensure that
the queue is closed when everything expected is done.
Fixes: https://github.com/go-gitea/gitea/issues/23608
Fixes: https://github.com/go-gitea/gitea/issues/23977
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
The old `HTMLRender` is not ideal.
1. It shouldn't be initialized multiple times, it consumes a lot of
memory and is slow.
2. It shouldn't depend on short-lived requests, the `WatchLocalChanges`
needs a long-running context.
3. It doesn't make sense to use FuncsMap slice.
HTMLRender was designed to only work for GItea's specialized 400+
templates, so it's good to make it a global shared instance.
For my specific use case, I'd like to get all commits that are on one
branch but NOT on the other branch.
For instance, I'd like to get all the commits on `Branch1` that are not
also on `master` (I.e. all commits that were made after `Branch1` was
created).
This PR adds a `not` query param that gets passed down to the `git log`
command to allow the user to exclude items from `GetAllCommits`.
See [git
documentation](https://git-scm.com/docs/git-log#Documentation/git-log.txt---not)
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: @awkwardbunny
This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.
---------
Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
There was only one `IsRepositoryExist` function, it did: `has && isDir`
However it's not right, and it would cause 500 error when creating a new
repository if the dir exists.
Then, it was changed to `has || isDir`, it is still incorrect, it
affects the "adopt repo" logic.
To make the logic clear:
* IsRepositoryModelOrDirExist
* IsRepositoryModelExist
> The scoped token PR just checked all API routes but in fact, some web
routes like `LFS`, git `HTTP`, container, and attachments supports basic
auth. This PR added scoped token check for them.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
## Needs and benefits
[Livebook](https://livebook.dev/) notebooks are used for code
documentation and for deep dives and note-taking in the elixir
ecosystem. Rendering these in these as Markdown on frogejo has many
benefits, since livemd is a subset of markdown. Some of the benefits
are:
- New users of elixir and livebook are scared by unformated .livemd
files, but are shown what they expect
- Sharing a notebook is as easy as sharing a link, no need to install
the software in order to see the results.
[goldmark-meraid ](https://github.com/abhinav/goldmark-mermaid) is a
mermaid-js parser already included in gitea. This makes the .livemd
rendering integration feature complete. With this PR class diagrams, ER
Diagrams, flow charts and much more will be rendered perfectly.
With the additional functionality gitea will be an ideal tool for
sharing resources with fellow software engineers working in the elixir
ecosystem. Allowing the git forge to be used without needing to install
any software.
## Feature Description
This issue requests the .livemd extension to be added as a Markdown
language extension.
- `.livemd` is the extension of Livebook which is an Elixir version of
Jupyter Notebook.
- `.livemd` is` a subset of Markdown.
This would require the .livemd to be recognized as a markdown file. The
Goldmark the markdown parser should handle the parsing and rendering
automatically.
Here is the corresponding commit for GitHub linguist:
https://github.com/github/linguist/pull/5672
Here is a sample page of a livemd file:
https://github.com/github/linguist/blob/master/samples/Markdown/livebook.livemd
## Screenshots
The first screenshot shows how github shows the sample .livemd in the
browser.
The second screenshot shows how mermaid js, renders my development
notebook and its corresponding ER Diagram. The source code can be found
here:
79615f7428/termiNotes.livemd
## Testing
I just changed the file extension from `.livemd`to `.md`and the document
already renders perfectly on codeberg. Check you can it out
[here](https://codeberg.org/lgh/Termi/src/branch/livemd2md/termiNotes.md)
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
After #24317 this function is only used in one place where it is not
needed. I confirmed the timestamp still renders correctly
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
This adds a API for getting License templates. This tries to be as close
to the [GitHub
API](https://docs.github.com/en/rest/licenses?apiVersion=2022-11-28) as
possible, but Gitea does not support all features that GitHub has. I
think they should been added, but this out f the scope of this PR. You
should merge #23006 before this PR for security reasons.
Enable [forbidigo](https://github.com/ashanbrown/forbidigo) linter which
forbids print statements. Will check how to integrate this with the
smallest impact possible, so a few `nolint` comments will likely be
required. Plan is to just go through the issues and either:
- Remove the print if it is nonsensical
- Add a `//nolint` directive if it makes sense
I don't plan on investigating the individual issues any further.
<details>
<summary>Initial Lint Results</summary>
```
modules/log/event.go:348:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/log/event.go:382:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/queue/unique_queue_disk_channel_test.go:20:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("TempDir %s\n", tmpDir)
^
contrib/backport/backport.go:168:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Backporting %s to %s as %s\n", pr, localReleaseBranch, backportBranch)
^
contrib/backport/backport.go:216:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Navigate to %s to open PR\n", url)
^
contrib/backport/backport.go:223:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `xdg-open %s`\n", url)
^
contrib/backport/backport.go:233:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git push -u %s %s`\n", remote, backportBranch)
^
contrib/backport/backport.go:243:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Amending commit to prepend `Backport #%s` to body\n", pr)
^
contrib/backport/backport.go:272:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("* Attempting git cherry-pick --continue")
^
contrib/backport/backport.go:281:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Attempting git cherry-pick %s\n", sha)
^
contrib/backport/backport.go:297:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s\n", currentBranch)
^
contrib/backport/backport.go:299:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s - not checking out\n", currentBranch)
^
contrib/backport/backport.go:304:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Branch %s already exists. Checking it out...\n", backportBranch)
^
contrib/backport/backport.go:308:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git checkout -b %s %s`\n", backportBranch, releaseBranch)
^
contrib/backport/backport.go:313:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s main`\n", remote)
^
contrib/backport/backport.go:316:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:319:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:321:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s %s`\n", remote, releaseBranch)
^
contrib/backport/backport.go:324:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:327:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
models/unittest/fixtures.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Unsupported RDBMS for integration tests")
^
models/unittest/fixtures.go:89:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("LoadFixtures failed after retries: %v\n", err)
^
models/unittest/fixtures.go:110:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to generate sequence update: %v\n", err)
^
models/unittest/fixtures.go:117:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to update sequence: %s Error: %v\n", value, err)
^
models/migrations/base/tests.go:118:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Environment variable $GITEA_ROOT not set")
^
models/migrations/base/tests.go:127:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Could not find gitea binary at %s\n", setting.AppPath)
^
models/migrations/base/tests.go:134:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set - defaulting to %s\n", giteaConf)
^
models/migrations/base/tests.go:145:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to create temporary data path %v\n", err)
^
models/migrations/base/tests.go:154:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to InitFull: %v\n", err)
^
models/migrations/v1_11/v112.go:34:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error: %v", err)
^
contrib/fixtures/fixture_generation.go:36:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("CreateTestEngine: %+v", err)
^
contrib/fixtures/fixture_generation.go:40:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("PrepareTestDatabase: %+v\n", err)
^
contrib/fixtures/fixture_generation.go:46:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", r, err)
^
contrib/fixtures/fixture_generation.go:53:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", g.name, err)
^
contrib/fixtures/fixture_generation.go:71:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s created.\n", path)
^
services/gitdiff/gitdiff_test.go:543:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:560:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:577:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
modules/web/routing/logger_manager.go:34:2: use of `print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
print Printer
^
modules/doctor/paths.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Warning: can't remove temporary file: '%s'\n", tmpFile.Name())
^
tests/test_utils.go:33:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf(format+"\n", args...)
^
tests/test_utils.go:61:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf)
^
cmd/actions.go:54:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("%s\n", respText)
^
cmd/admin_user_change_password.go:74:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s's password has been successfully updated!\n", user.Name)
^
cmd/admin_user_create.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generated random password is '%s'\n", password)
^
cmd/admin_user_create.go:164:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created... %s\n", t.Token)
^
cmd/admin_user_create.go:167:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("New user '%s' has been successfully created!\n", username)
^
cmd/admin_user_generate_access_token.go:74:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s\n", t.Token)
^
cmd/admin_user_generate_access_token.go:76:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created: %s\n", t.Token)
^
cmd/admin_user_must_change_password.go:56:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Updated %d users setting MustChangePassword to %t\n", n, mustChangePassword)
^
cmd/convert.go:44:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's character set is now utf8mb4")
^
cmd/convert.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's all columns character is NVARCHAR now")
^
cmd/convert.go:52:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("This command can only be used with a MySQL or MSSQL database")
^
cmd/doctor.go:104:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/doctor.go:105:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Check if you are using the right config file. You can use a --config directive to specify one.")
^
cmd/doctor.go:243:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/embedded.go:154:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(a.path)
^
cmd/embedded.go:198:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Using app.ini at", setting.CustomConf)
^
cmd/embedded.go:217:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Extracting to %s:\n", destdir)
^
cmd/embedded.go:253:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s already exists; skipped.\n", dest)
^
cmd/embedded.go:275:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(dest)
^
cmd/generate.go:63:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", internalToken)
^
cmd/generate.go:66:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:78:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", JWTSecretBase64)
^
cmd/generate.go:81:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:93:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", secretKey)
^
cmd/generate.go:96:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/keys.go:74:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(strings.TrimSpace(authorizedString))
^
cmd/mailer.go:32:4: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("warning: Content is empty")
^
cmd/mailer.go:35:3: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("Proceed with sending email? [Y/n] ")
^
cmd/mailer.go:40:4: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("The mail was not sent")
^
cmd/mailer.go:49:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("Sent %s email(s) to all users\n", respText)
^
cmd/serv.go:147:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Gitea: SSH has been disabled")
^
cmd/serv.go:153:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("error showing subcommand help: %v\n", err)
^
cmd/serv.go:175:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the deploy key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:177:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the principal " + key.Content + ", but Gitea does not provide shell access.")
^
cmd/serv.go:179:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there, " + user.Name + "! You've successfully authenticated with the key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:181:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("If this is unexpected, please log in with password and setup Gitea under another user.")
^
cmd/serv.go:196:5: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print(`{"type":"gitea","version":1}`)
^
tests/e2e/e2e_test.go:54:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/e2e/e2e_test.go:63:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/e2e/e2e_test.go:67:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/e2e/e2e_test.go:109:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/e2e/e2e_test.go:110:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stderr.String())
^
tests/e2e/e2e_test.go:113:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/integration/integration_test.go:124:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/integration/integration_test.go:135:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/integration/integration_test.go:139:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/integration/repo_test.go:357:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", resp.Body)
^
```
</details>
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This refactors the `shared/datetime/short|long|full` templates into a
template helper function, which allows us to render absolute date times
within translatable phrases.
- Follows #23988
- The first attempt was in #24055
- This should help #22664
Changes:
1. Added the `DateTime` template helper that replaces the
`shared/datetime/short|long|full` templates
2. Used find-and-replace with varying regexes to replace the templates
from step 1 (for example, `\{\{template "shared/datetime/(\S+) \(dict
"Datetime" ([^"]+) "Fallback" ([^\)]+\)?) ?\)?\}\}` -> `{{DateTime "$1
$2 $3}}`)
3. Used the new `DateTime` helper in the issue due date timestamp
rendering
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The `SHOW_FOOTER_BRANDING` came from year 2015, and it seems nobody ever
uses it. It only shows an GitHub icon which seems unrelated to Gitea, it
doesn't do what document says. So, remove it.
## ⚠️ Breaking
Users can now remove the key `[other].SHOW_FOOTER_BRANDING` from their
app.ini.
- Update all tool dependencies to latest tag
- Remove unused errcheck, it is part of golangci-lint
- Include main.go in air
- Enable wastedassign again now that it's
[generics-compatible](https://github.com/golangci/golangci-lint/pull/3689)
- Restructured lint targets to new `lint-*` namespace
Follow #23328
The improvements:
1. The `contains` functions are covered by tests
2. The inconsistent behavior of `containGeneric` is replaced by
`StringUtils.Contains` and `SliceUtils.Contains`
3. In the future we can move more help functions into XxxUtils to
simplify the `helper.go` and reduce unnecessary global functions.
FAQ:
1. Why it's called `StringUtils.Contains` but not `strings.Contains`
like Golang?
Because our `StringUtils` is not Golang's `strings` package. There will
be our own string functions.
---------
Co-authored-by: silverwind <me@silverwind.io>
Before, there was a `log/buffer.go`, but that design is not general, and
it introduces a lot of irrelevant `Content() (string, error) ` and
`return "", fmt.Errorf("not supported")` .
And the old `log/buffer.go` is difficult to use, developers have to
write a lot of `Contains` and `Sleep` code.
The new `LogChecker` is designed to be a general approach to help to
assert some messages appearing or not appearing in logs.
Users can now upload `webp` images.
Browsers supporting webp images then display this as the avatar of this
user (every major browser except IE).
---------
Co-authored-by: silverwind <me@silverwind.io>
The old code is unnecessarily complex, and has many misuses.
Old code "wraps" a lot, wrap wrap wrap, it's difficult to understand
which kind of handler is used.
The new code uses a general approach, we do not need to write all kinds
of handlers into the "wrapper", do not need to wrap them again and
again.
New code, there are only 2 concepts:
1. HandlerProvider: `func (h any) (handlerProvider func (next)
http.Handler)`, it can be used as middleware
2. Use HandlerProvider to get the final HandlerFunc, and use it for
`r.Get()`
And we can decouple the route package from context package (see the
TODO).
# FAQ
## Is `reflect` safe?
Yes, all handlers are checked during startup, see the `preCheckHandler`
comment. If any handler is wrong, developers could know it in the first
time.
## Does `reflect` affect performance?
No. https://github.com/go-gitea/gitea/pull/24080#discussion_r1164825901
1. This reflect code only runs for each web handler call, handler is far
more slower: 10ms-50ms
2. The reflect is pretty fast (comparing to other code): 0.000265ms
3. XORM has more reflect operations already
# Background
Golang template is not friendly for large projects, and Golang template
team is quite slow, related:
* `https://github.com/golang/go/issues/54450`
Without upstream support, we can also have our solution to make HTML
template functions support context.
It helps a lot, the above Golang template issue `#54450` explains a lot:
1. It makes `{{Locale.Tr}}` could be used in any template, without
passing unclear `(dict "root" . )` anymore.
2. More and more functions need `context`, like `avatar`, etc, we do not
need to do `(dict "Context" $.Context)` anymore.
3. Many request-related functions could be shared by parent&children
templates, like "user setting" / "system setting"
See the test `TestScopedTemplateSetFuncMap`, one template set, two
`Execute` calls with different `CtxFunc`.
# The Solution
Instead of waiting for upstream, this PR re-uses the escaped HTML
template trees, use `AddParseTree` to add related templates/trees to a
new template instance, then the new template instance can have its own
FuncMap , the function calls in the template trees will always use the
new template's FuncMap.
`template.New` / `template.AddParseTree` / `adding-FuncMap` are all
quite fast, so the performance is not affected.
The details:
1. Make a new `html/template/Template` for `all` templates
2. Add template code to the `all` template
3. Freeze the `all` template, reset its exec func map, it shouldn't
execute any template.
4. When a router wants to render a template by its `name`
1. Find the `name` in `all`
2. Find all its related sub templates
3. Escape all related templates (just like what the html template
package does)
4. Add the escaped parse-trees of related templates into a new (scoped)
`text/template/Template`
5. Add context-related func map into the new (scoped) text template
6. Execute the new (scoped) text template
7. To improve performance, the escaped templates are cached to `template
sets`
# FAQ
## There is a `unsafe` call, is this PR unsafe?
This PR is safe. Golang has strict language definition, it's safe to do
so: https://pkg.go.dev/unsafe#Pointer (1) Conversion of a *T1 to Pointer
to *T2
## What if Golang template supports such feature in the future?
The public structs/interfaces/functions introduced by this PR is quite
simple, the code of `HTMLRender` is not changed too much. It's very easy
to switch to the official mechanism if there would be one.
## Does this PR change the template execution behavior?
No, see the tests (welcome to design more tests if it's necessary)
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Close#7570
1. Clearly define the wiki path behaviors, see
`services/wiki/wiki_path.go` and tests
2. Keep compatibility with old contents
3. Allow to use dashes in titles, eg: "2000-01-02 Meeting record"
4. Add a "Pages" link in the dropdown, otherwise users can't go to the
Pages page easily.
5. Add a "View original git file" link in the Pages list, even if some
file names are broken, users still have a chance to edit or remove it,
without cloning the wiki repo to local.
6. Fix 500 error when the name contains prefix spaces.
This PR also introduces the ability to support sub-directories, but it
can't be done at the moment due to there are a lot of legacy wiki data,
which use "%2F" in file names.
Co-authored-by: Giteabot <teabot@gitea.io>
The old code has a lot of technical debts, eg: `repo/wiki/view.tmpl` /
`Iterate`
This PR improves the Wiki TOC display and improves the code.
---------
Co-authored-by: delvh <dev.lh@web.de>
Close#24062
At the beginning, I just wanted to fix the warning mentioned by #24062
But, the cookie code really doesn't look good to me, so clean up them.
Complete the TODO on `SetCookie`:
> TODO: Copied from gitea.com/macaron/macaron and should be improved
after macaron removed.
The default access log format has been unnecessarily escaped, leading to
spurious backslashes appearing in log lines.
Additionally, the `RemoteAddr` field includes the port, which breaks
most log parsers attempting to process it. I've added a call to
`net.SplitHostPort()` attempting to isolate the address alone, with a
fallback to the original address if it errs.
Signed-off-by: Gary Moon <gary@garymoon.net>
The idea is to use a Layered Asset File-system (modules/assetfs/layered.go)
For example: when there are 2 layers: "custom", "builtin", when access
to asset "my/page.tmpl", the Layered Asset File-system will first try to
use "custom" assets, if not found, then use "builtin" assets.
This approach will hugely simplify a lot of code, make them testable.
Other changes:
* Simplify the AssetsHandlerFunc code
* Simplify the `gitea embedded` sub-command code
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Without this patch, the setting SSH.StartBuiltinServer decides whether
the native (Go) implementation is used rather than calling 'ssh-keygen'.
It's possible for 'using ssh-keygen' and 'using the built-in server' to
be independent.
In fact, the gitea rootless container doesn't ship ssh-keygen and can be
configured to use the host's SSH server - which will cause the public
key parsing mechanism to break.
This commit changes the decision to be based on SSH.KeygenPath instead.
Any existing configurations with a custom KeygenPath set will continue
to function. The new default value of '' selects the native version. The
downside of this approach is that anyone who has relying on plain
'ssh-keygen' to have special properties will now be using the native
version instead.
I assume the exec-variant is only there because /x/crypto/ssh didn't
support ssh-ed25519 until 2016. I don't see any other reason for using
it so it might be an acceptable risk.
Fixes#23363
EDIT: this message was garbled when I tried to get the commit
description back in.. Trying to reconstruct it:
## ⚠️ BREAKING ⚠️ Users who don't have SSH.KeygenPath
explicitly set and rely on the ssh-keygen binary need to set
SSH.KeygenPath to 'ssh-keygen' in order to be able to continue using it
for public key parsing.
There was something else but I can't remember at the moment.
EDIT2: It was about `make test` and `make lint`. Can't get them to run.
To reproduce the issue, I installed `golang` in `docker.io/node:16` and
got:
```
...
go: mvdan.cc/xurls/v2@v2.4.0: unknown revision mvdan.cc/xurls/v2.4.0
go: gotest.tools/v3@v3.4.0: unknown revision gotest.tools/v3.4.0
...
go: gotest.tools/v3@v3.0.3: unknown revision gotest.tools/v3.0.3
...
go: error loading module requirements
```
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Close#24002
Two problems before:
1. The `log.Fatal` is missing after these `wrapFatal` calls, so the
error is not shown to users.
2. `GetTemplateAssetNames` has different behaviors for local files and
builtin assets, for builtin assets, it also returns directories, so we
need to check the extension again.
I have tested with `TAGS="bindata sqlite sqlite_unlock_notify" make
build && ./gitea` , it works well now. Before, the server responds
internal server error (because it doesn't complete the template parsing)
None of the features of `unrolled/render` package is used.
The Golang builtin "html/template" just works well. Then we can improve
our HTML render to resolve the "$.root.locale.Tr" problem as much as
possible.
Next step: we can have a template render pool (by Clone), then we can
inject global functions with dynamic context to every `Execute` calls.
Then we can use `{{Locale.Tr ....}}` directly in all templates , no need
to pass the `$.root.locale` again and again.
One of the steps in #23328
Before there were 3 different but similar functions: dict/Dict/mergeinto
The code was just copied & pasted, no test.
This PR defines a new stable `dict` function, it covers all the 3 old
functions behaviors, only +160 -171
Future developers do not need to think about or guess the different dict
functions, just use one: `dict`
Why use `dict` but not `Dict`? Because there are far more `dict` than
`Dict` in code already ......
One of the proposals in #23328
This PR introduces a simple expression calculator
(templates/eval/eval.go), it can do basic expression calculations.
Many untested template helper functions like `Mul` `Add` can be replaced
by this new approach.
Then these `Add` / `Mul` / `percentage` / `Subtract` / `DiffStatsWidth`
could all use this `Eval`.
And it provides enhancements for Golang templates, and improves
readability.
Some examples:
----
* Before: `{{Add (Mul $glyph.Row 12) 12}}`
* After: `{{Eval $glyph.Row "*" 12 "+" 12}}`
----
* Before: `{{if lt (Add $i 1) (len $.Topics)}}`
* After: `{{if Eval $i "+" 1 "<" (len $.Topics)}}`
## FAQ
### Why not use an existing expression package?
We need a highly customized expression engine:
* do the calculation on the fly, without pre-compiling
* deal with int/int64/float64 types, to make the result could be used in
Golang template.
* make the syntax could be used in the Golang template directly
* do not introduce too much complex or strange syntax, we just need a
simple calculator.
* it needs to strictly follow Golang template's behavior, for example,
Golang template treats all non-zero values as truth, but many 3rd
packages don't do so.
### What's the benefit?
* Developers don't need to add more `Add`/`Mul`/`Sub`-like functions,
they were getting more and more.
Now, only one `Eval` is enough for all cases.
* The new code reads better than old `{{Add (Mul $glyph.Row 12) 12}}`,
the old one isn't familiar to most procedural programming developers
(eg, the Golang expression syntax).
* The `Eval` is fully covered by tests, many old `Add`/`Mul`-like
functions were never tested.
### The performance?
It doesn't use `reflect`, it doesn't need to parse or compile when used
in Golang template, the performance is as fast as native Go template.
### Is it too complex? Could it be unstable?
The expression calculator program is a common homework for computer
science students, and it's widely used as a teaching and practicing
purpose for developers. The algorithm is pretty well-known.
The behavior can be clearly defined, it is stable.
The first step of #23328
This PR cleans:
1. Dead function like `SubStr`
2. Unnecessary function like `UseHTTPS`, it should be provided by
`window.origin`
3. Duplicate function like `IsShowFullName`, there was already a
`DeafultShowFullName`
I have searched these removed functions globally, no use in code.
Remove the misbehaving function and call
Repository.GetFilesChangedBetween instead.
Fixes#23919
---
~~_TODO_ test this~~ `Repository.getFilesChanged` seems to be only used
by Gitea Actions, but a similar function already exists
**Update** I tested this change and the issue is gone.
The _graceful_ should fail less when the `.editorconfig` file isn't
properly written, e.g. boolean values from YAML or unparseable numbers
(when a number is expected). As is... information is lost as the
_warning_ (a go-multierror.Error) is ignored. If anybody knows how to
send them to the UI as warning; any help is appreciated.
Closes#20694
Signed-off-by: Yoan Blanc <yoan@dosimple.ch>
At first, we have one unified team unit permission which is called
`Team.Authorize` in DB.
But since https://github.com/go-gitea/gitea/pull/17811, we allowed
different units to have different permission.
The old code is only designed for the old version. So after #17811, if
org users have write permission of other units, but have no permission
of packages, they can also get write permission of packages.
Co-authored-by: delvh <dev.lh@web.de>
Follow #23633 and #23240Close#23814
Now we almost have a complete test set for Gitea's LocalStore.
This PR is still a quick fix for the legacy locale system (see the
TODOs), to resolve the problems fundamentally, it needs more work in the
future.
Follow #21962
After I eat my own dogfood, I would say that
ONLY_SHOW_RELEVANT_REPOS=false is necessary for many private/enterprise
instances, because many private repositories do not have
"description/topic", users just want to search by their names.
This PR also adds `PageIsExploreRepositories` check, to make code more
strict, because the `search` template is shared for different purpose.
And during the test, I found a bug that the "Search" button didn't
respect the "relevant" parameter, so this PR fixes the bug by the way
together.
I think this PR needs to be backported.
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
Closes#20955
This PR adds the possibility to disable blank Issues, when the Repo has
templates. This can be done by creating the file
`.gitea/issue_config.yaml` with the content `blank_issues_enabled` in
the Repo.
Adds API endpoints to manage issue/PR dependencies
* `GET /repos/{owner}/{repo}/issues/{index}/blocks` List issues that are
blocked by this issue
* `POST /repos/{owner}/{repo}/issues/{index}/blocks` Block the issue
given in the body by the issue in path
* `DELETE /repos/{owner}/{repo}/issues/{index}/blocks` Unblock the issue
given in the body by the issue in path
* `GET /repos/{owner}/{repo}/issues/{index}/dependencies` List an
issue's dependencies
* `POST /repos/{owner}/{repo}/issues/{index}/dependencies` Create a new
issue dependencies
* `DELETE /repos/{owner}/{repo}/issues/{index}/dependencies` Remove an
issue dependency
Closes https://github.com/go-gitea/gitea/issues/15393Closes#22115
Co-authored-by: Andrew Thornton <art27@cantab.net>
Reference:
https://github.com/go-gitea/gitea/issues/22578#issuecomment-1444180053
Credits to @tdesveaux , thank you very much for catching the problem. If
you'd like to open a PR, feel free to replace this one.
Git reports fatal errors for ambiguous arguments:
```
fatal: ambiguous argument 'refs/a...refs/b': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
```
So the `--` separator is necessary in some cases.
Follow:
* #23574
* Remove all ".tooltip[data-content=...]"
Major changes:
* Remove "tooltip" class, use "[data-tooltip-content=...]" instead of
".tooltip[data-content=...]"
* Remove legacy `data-position`, it's dead code since last Fomantic
Tooltip -> Tippy Tooltip refactoring
* Rename reaction attribute from `data-content` to
`data-reaction-content`
* Add comments for some `data-content`: `{{/* used by the form */}}`
* Remove empty "ui" class
* Use "text color" for SVG icons (a few)
Remove `[repository.editor] PREVIEWABLE_FILE_MODES` setting that seemed
like it was intended to support this but did not work. Instead, whenever
viewing a file shows a preview, also have a Preview tab in the file
editor.
Add new `/markup` web and API endpoints with `comment`, `gfm`,
`markdown` and new `file` mode that uses a file path to determine the
renderer.
Remove `/markdown` web endpoint but keep the API for backwards and
GitHub compatibility.
## ⚠️ BREAKING ⚠️
The `[repository.editor] PREVIEWABLE_FILE_MODES` setting was removed.
This setting served no practical purpose and was not working correctly.
Instead a preview tab is always shown in the file editor when supported.
---------
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Close#23622
As described in the issue, disabling the LFS/Package settings will cause
errors when running `gitea dump` or `gitea doctor`. We need to check the
settings and the related operations should be skipped if the settings
are disabled.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Follow #23037
Fix [#22598
comment](https://github.com/go-gitea/gitea/issues/22958#issuecomment-1475763042)
Workflows with `pull_request` trigger event can't be triggered by
`pull_request_sync` event. This PR adds the `canGithubEventMatch`
function to check if a Github event can match any Gitea event. If the
Github event matches a Gitea event, the related workflows should be
triggered.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Since #23493 has conflicts with latest commits, this PR is my proposal
for fixing #23371
Details are in the comments
And refactor the `modules/options` module, to make it always use
"filepath" to access local files.
Benefits:
* No need to do `util.CleanPath(strings.ReplaceAll(p, "\\", "/"))),
"/")` any more (not only one before)
* The function behaviors are clearly defined
There are multiple duplicate reports of errors during template rendering
due to broken custom templates.
Unfortunately the error returned here is somewhat difficult for users to
understand and it doesn't return the context of the error.
This PR attempts to parse the error returned by the template renderer to
add in some further context including the filename of the template AND
the preceding lines within that template file.
Ref #23274
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Close#23444
Add `Repository` to npm package `Metadata` struct so the `repository` in
`package.json` can be stored and be returned in the endpoint.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
This PR fixes the tags sort issue mentioned in #23432
The tags on dropdown shoud be sorted in descending order of time but are
not. Because when getting tags, it execeutes `git tag sort
--sort=-taggerdate`. Git supports two types of tags: lightweight and
annotated, and `git tag sort --sort=-taggerdate` dosen't work with
lightweight tags, which will not give correct result. This PR add
`GetTagNamesByRepoID ` to get tags from the database so the tags are
sorted.
Also adapt this change to the droplist when comparing branches.
Dropdown places:
<img width="369" alt="截屏2023-03-15 14 25 39"
src="https://user-images.githubusercontent.com/17645053/225224506-65a72e50-4c11-41d7-8187-a7e9c7dab2cb.png">
<img width="675" alt="截屏2023-03-15 14 25 27"
src="https://user-images.githubusercontent.com/17645053/225224526-65ce8008-340c-43f6-aa65-b6bd9e1a1bf1.png">
Currently gitea shows no commit information for files starting with a
colon.
[I set up a minimal repro repository that reproduces this error once
it's migrated on gitea](https://github.com/kbolashev/colon-test)
<img width="1209" alt="image"
src="https://user-images.githubusercontent.com/111061261/219326625-0e6d3a86-8b58-4d67-bc24-8a78963f36b9.png">
This is happening because the filenames piped to the `git log` command
are written as is, and it doesn't work when you have a colon at the
start of the filename, and you need to escape it.
You can test it locally, if you do
```
mkdir repo
git init
touch :file
git add . && git commit -m "Add file with colon"
git log -- :file
```
git log returns nothing. However, if you do `git log -- "\:file"`, it
will show the commit with the file change.
This PR escapes the starting colons in paths in the `LogNameStatusRepo`
function, making gitea return commit info about the file with the bad
filename.
<img width="1209" alt="image"
src="https://user-images.githubusercontent.com/111061261/219328299-46451246-4006-45e3-89b1-c244635ded23.png">
This error shows up only with files starting with colon, anywhere else
in filename is ok. Dashes at the beginning also seem to be working.
I don't know gitea internals well enough to know where else this error
can pop up, so I'm keeping this PR small as suggested by your
contributor guide
Creating pid file should not belong to setting package and only web
command needs that. So this PR moves pidfile creation from setting
package to web command package to keep setting package more readable.
I marked this as `break` because the PIDFile path moved. For those who
have used the pid build argument, it has to be changed.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
hardcode the version of test_env we use in docker, so that we can use
different major versions of golang between versions of Gitea
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
this is a simple endpoint that adds the ability to rename users to the
admin API.
Note: this is not in a mergeable state. It would be better if this was
handled by a PATCH/POST to the /api/v1/admin/users/{username} endpoint
and the username is modified.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Close#23411
Always pass "page" query parameter to backend, and make backend respect
it.
The `ctx.FormInt("limit")` is never used, so removed.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Support to iterator subdirectory in ObjectStorage for
ObjectStorage.Iterator method.
It's required for https://github.com/go-gitea/gitea/pull/22738 to make
artifact files cleanable.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR adds support for reflogs on all repositories. It does this by
adding a global configuration entry.
Implements #14865
---------
Signed-off-by: Philip Peterson <philip.c.peterson@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix scoped label left and right part breaking across lines.
* Remove slanted divider in scoped label display, make it straight.
After using this for a while, this feels more visually noisy than
helpful.
* Reduce contrast between scope and item to reduce probability of
unreadable text on background.
* Change documentation to remove mention of non-exclusive scoped labels.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fixes https://github.com/go-gitea/gitea/issues/22676
Context Data `IsOrganizationMember` and `IsOrganizationOwner` is used to
control the visibility of `people` and `team` tab.
2871ea0809/templates/org/menu.tmpl (L19-L40)
And because of the reuse of user projects page, User Context is changed
to Organization Context. But the value of `IsOrganizationMember` and
`IsOrganizationOwner` are not being given.
I reused func `HandleOrgAssignment` to add them to the ctx, but may have
some unnecessary variables, idk whether it is ok.
I found there is a missing `PageIsViewProjects` at create project page.
When the base repository contains multiple branches with the same
commits as the base branch, pull requests can show a long list of
commits already in the base branch as having been added.
What this is supposed to do is exclude commits already in the base
branch. But the mechansim to do so assumed a commit only exists in a
single branch. Now use `git rev-list A B --not branchName` instead of
filtering commits afterwards.
The logic to detect if there was a force push also was wrong for
multiple branches. If the old commit existed in any branch in the base
repository it would assume there was no force push. Instead check if the
old commit is an ancestor of the new commit.
Follow #22568
* Remove unnecessary ToTrustedCmdArgs calls
* the FAQ in #22678
* Quote: When using ToTrustedCmdArgs, the code will be very complex (see
the changes for examples). Then developers and reviewers can know that
something might be unreasonable.
* The `signArg` couldn't be empty, it's either `-S{keyID}` or
`--no-gpg-sign`.
* Use `signKeyID` instead, add comment "empty for no-sign, non-empty to
sign"
* 5-line code could be extracted to a common `NewGitCommandCommit()` to
handle the `signKeyID`, but I think it's not a must, current code is
clear enough.
Related to: #22294#23186#23054
Replace: #23218
Some discussion is in the comments of #23218.
Highlights:
- Add Expiration for cache context. If a cache context has been used for
more than 10s, the cache data will be ignored, and warning logs will be
printed.
- Add `discard` field to `cacheContext`, a `cacheContext` with `discard`
true will drop all cached data and won't store any new one.
- Introduce `WithNoCacheContext`, if one wants to run long-life tasks,
but the parent context is a cache context,
`WithNoCacheContext(perentCtx)` will discard the cache data, so it will
be safe to keep the context for a long time.
- It will be fine to treat an original context as a cache context, like
`GetContextData(context.Backgraud())`, no warning logs will be printed.
Some cases about nesting:
When:
- *A*, *B* or *C* means a cache context.
- ~*A*~, ~*B*~ or ~*C*~ means a discard cache context.
- `ctx` means `context.Backgrand()`
- *A(ctx)* means a cache context with `ctx` as the parent context.
- *B(A(ctx))* means a cache context with `A(ctx)` as the parent context.
- `With` means `WithCacheContext`
- `WithNo` means `WithNoCacheContext`
So:
- `With(ctx)` -> *A(ctx)*
- `With(With(ctx))` -> *A(ctx)*, not *B(A(ctx))*
- `With(With(With(ctx)))` -> *A(ctx)*, not *C(B(A(ctx)))*
- `WithNo(ctx)` -> *ctx*, not *~A~(ctx)*
- `WithNo(With(ctx))` -> *~A~(ctx)*
- `WithNo(WithNo(With(ctx)))` -> *~A~(ctx)*, not *~B~(~A~(ctx))*
- `With(WithNo(With(ctx)))` -> *B(~A~(ctx))*
- `WithNo(With(WithNo(With(ctx))))` -> *~B~(~A~(ctx))*
- `With(WithNo(With(WithNo(With(ctx)))))` -> *C(~B~(~A~(ctx)))*
Avoid maintaining two copies of code, some functions can be used with
both `bindata` and `no bindata`.
And removed `GetRepoInitFile`, it's useless now.
`Readme`/`Gitignore`/`License`/`Labels` will clean the name and use
custom files when available.
At the Moment it is possible to read files in another Directory as
supposed using the Options functions. e.g.
`options.Gitignore("../label/Default) `. This was discovered while
working on #22783, which exposes `options.Gitignore()` through the
public API. At the moment, this is not a security problem, as this
function is only used internal, but I thought it would be a good idea to
make a PR to fix this for all types of Options files, not only
Gitignore, to make it safe for the further. This PR should be merged
before the linked PR.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Close#17108
This PR uses a trick (removing the ID3 tag) to detect the content again
to to see whether the content is text type.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The merge and update branch code was previously a little tangled and had
some very long functions. The functions were not very clear in their
reasoning and there were deficiencies in their logging and at least one
bug in the handling of LFS for update by rebase.
This PR substantially refactors this code and splits things out to into
separate functions. It also attempts to tidy up the calls by wrapping
things in "context"s. There are also attempts to improve logging when
there are errors.
Signed-off-by: Andrew Thornton <art27@cantab.net>
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: delvh <dev.lh@web.de>
Replace #23350.
Refactor `setting.Database.UseMySQL` to
`setting.Database.Type.IsMySQL()`.
To avoid mismatching between `Type` and `UseXXX`.
This refactor can fix the bug mentioned in #23350, so it should be
backported.
This branch continues the work of #23092 and attempts to rid the
codebase of any `nil` contexts when using a `RenderContext`.
Anything that renders markdown or does post processing may call
`markup.sha1CurrentPatternProcessor()`, and this runs
`git.OpenRepository()`, which needs a context. It will panic if the
context is `nil`. This branch attempts to _always_ include a context
when creating a `RenderContext` to prevent future crashes.
Co-authored-by: Kyle D <kdumontnu@gmail.com>
## TLDR
* Fix the broken page / broken image problem when click "Install"
* Close#20089
* Fix the Password Hash Algorithm display problem for #22942
* Close#23183
* Close#23184
## Details
### The broken page / broken image problem when click "Install"
(Redirect failed after install gitea #23184)
Before: when click "install", all new requests will fail, because the
server has been restarted. Users just see a broken page with broken
images, sometimes the server is not ready but the user would have been
redirect to "/user/login" page, then the users see a new broken page
(connection refused or something wrong ...)
After: only check InstallLock=true for necessary handlers, and sleep for
a while before restarting the server, then the browser has enough time
to load the "post-install" page. And there is a script to check whether
"/user/login" is ready, the user will only be redirected to the login
page when the server is ready.
### During new instance setup make 'Gitea Base URL' filled from
window.location.origin #20089
If the "app_url" input contains `localhost` (the default value from
config), use current window's location href as the `app_url` (aka
ROOT_URL)
### Fix the Password Hash Algorithm display problem for "Provide the
ability to set password hash algorithm parameters #22942"
Before: the UI shows `pbkdf2$50000$50`
<details>
</details>
After: the UI shows `pbkdf2`
<details>
</details>
### GET data: net::ERR_INVALID_URL #23183
Cause by empty `data:` in `<link rel="manifest"
href="data:{{.ManifestData}}">`
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The code for GetFilesChangedBetween uses `git diff --name-only
base..head` to get the names of files changed between base and head
however this forgets that git will escape certain values.
This PR simply switches to use `-z` which has the `NUL` character as the
separator.
Ref https://github.com/go-gitea/gitea/pull/22568#discussion_r1123138096
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Extract from #11669 and enhancement to #22585 to support exclusive
scoped labels in label templates
* Move label template functionality to label module
* Fix handling of color codes
* Add Advanced label template
As you can imagine, for the Blender development process it is rather
nice to be able to include videos in issues, pull requests, etc.
This PR allows the `<video>` HTML tag to be used in MarkDown, with the
`src`, `autoplay`, and `controls` attributes.
## Help Needed
To have this fully functional, personally I feel the following things
are still missing, and would appreciate some help from the Gitea team.
### Styling
Some CSS is needed, but I couldn't figure out which of the LESS files
would work. I tried `web_src/less/markup/content.less` and
`web_src/less/_base.less`, but after running `make` the changes weren't
seen in the frontend.
This I would consider a minimal set of CSS rules to be applied:
```css
video {
max-width: 100%;
max-height: 100vh;
}
```
### Default Attributes
It would be fantastic if Gitea could add some default attributes to the
`<video>` tag. Basically `controls` should always be there, as there is
no point in disallowing scrolling through videos, looping them, etc.
### Integration with the attachments system
Another thing that could be added, but probably should be done in a
separate PR, is the integration with the attachments system. Dragging in
a video should attach it, then generate the appropriate MarkDown/HTML.
There have been a number of reports of PRs being blocked whilst being
checked which have been difficult to debug. In investigating #23050 I
have realised that whilst the Warn there is somewhat of a miscall there
was a real bug in the way that the LevelUniqueQueue was being restored
on start-up of the PersistableChannelUniqueQueue.
Next there is a conflict in the setting of the internal leveldb queue
name - This wasn't being set so it was being overridden by other unique
queues.
This PR fixes these bugs and adds a testcase.
Thanks to @brechtvl for noticing the second issue.
Fix#23050
and others
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This arose out of #22451; it seems we are checking using non-global
settings to see if a config value is set, in order to decide whether to
call another global(-indeed) configuration command. This PR changes it
so that both the check and the set are for global configuration.
Partially fix#23050
After #22294 merged, it always has a warning log like `cannot get
context cache` when starting up. This should not affect any real life
but it's annoying. This PR will fix the problem. That means when
starting up, getting the system settings will not try from the cache but
will read from the database directly.
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
minio/sha256-simd provides additional acceleration for SHA256 using
AVX512, SHA Extensions for x86 and ARM64 for ARM.
It provides a drop-in replacement for crypto/sha256 and if the
extensions are not available it falls back to standard crypto/sha256.
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Close #23027
`git commit` message option _only_ supports 4 formats (well, only ....):
* `"commit", "-m", msg`
* `"commit", "-m{msg}"` (no space)
* `"commit", "--message", msg`
* `"commit", "--message={msg}"`
The long format with `=` is the best choice, and it's documented in `man
git-commit`:
`-m <msg>, --message=<msg> ...`
ps: I would suggest always use long format option for git command, as
much as possible.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The API to create tokens is missing the ability to set the required
scopes for tokens, and to show them on the API and on the UI.
This PR adds this functionality.
Signed-off-by: Andrew Thornton <art27@cantab.net>
During the recent hash algorithm change it became clear that the choice
of password hash algorithm plays a role in the time taken for CI to run.
Therefore as attempt to improve CI we should consider using a dummy
hashing algorithm instead of a real hashing algorithm.
This PR creates a dummy algorithm which is then set as the default
hashing algorithm during tests that use the fixtures. This hopefully
will cause a reduction in the time it takes for CI to run.
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Some bugs caused by less unit tests in fundamental packages. This PR
refactor `setting` package so that create a unit test will be easier
than before.
- All `LoadFromXXX` files has been splited as two functions, one is
`InitProviderFromXXX` and `LoadCommonSettings`. The first functions will
only include the code to create or new a ini file. The second function
will load common settings.
- It also renames all functions in setting from `newXXXService` to
`loadXXXSetting` or `loadXXXFrom` to make the function name less
confusing.
- Move `XORMLog` to `SQLLog` because it's a better name for that.
Maybe we should finally move these `loadXXXSetting` into the `XXXInit`
function? Any idea?
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
This PR refactors and improves the password hashing code within gitea
and makes it possible for server administrators to set the password
hashing parameters
In addition it takes the opportunity to adjust the settings for `pbkdf2`
in order to make the hashing a little stronger.
The majority of this work was inspired by PR #14751 and I would like to
thank @boppy for their work on this.
Thanks to @gusted for the suggestion to adjust the `pbkdf2` hashing
parameters.
Close#14751
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Add a new "exclusive" option per label. This makes it so that when the
label is named `scope/name`, no other label with the same `scope/`
prefix can be set on an issue.
The scope is determined by the last occurence of `/`, so for example
`scope/alpha/name` and `scope/beta/name` are considered to be in
different scopes and can coexist.
Exclusive scopes are not enforced by any database rules, however they
are enforced when editing labels at the models level, automatically
removing any existing labels in the same scope when either attaching a
new label or replacing all labels.
In menus use a circle instead of checkbox to indicate they function as
radio buttons per scope. Issue filtering by label ensures that only a
single scoped label is selected at a time. Clicking with alt key can be
used to remove a scoped label, both when editing individual issues and
batch editing.
Label rendering refactor for consistency and code simplification:
* Labels now consistently have the same shape, emojis and tooltips
everywhere. This includes the label list and label assignment menus.
* In label list, show description below label same as label menus.
* Don't use exactly black/white text colors to look a bit nicer.
* Simplify text color computation. There is no point computing luminance
in linear color space, as this is a perceptual problem and sRGB is
closer to perceptually linear.
* Increase height of label assignment menus to show more labels. Showing
only 3-4 labels at a time leads to a lot of scrolling.
* Render all labels with a new RenderLabel template helper function.
Label creation and editing in multiline modal menu:
* Change label creation to open a modal menu like label editing.
* Change menu layout to place name, description and colors on separate
lines.
* Don't color cancel button red in label editing modal menu.
* Align text to the left in model menu for better readability and
consistent with settings layout elsewhere.
Custom exclusive scoped label rendering:
* Display scoped label prefix and suffix with slightly darker and
lighter background color respectively, and a slanted edge between them
similar to the `/` symbol.
* In menus exclusive labels are grouped with a divider line.
---------
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Allow back-dating user creation via the `adminCreateUser` API operation.
`CreateUserOption` now has an optional field `created_at`, which can
contain a datetime-formatted string. If this field is present, the
user's `created_unix` database field will be updated to its value.
This is important for Blender's migration of users from Phabricator to
Gitea. There are many users, and the creation timestamp of their account
can give us some indication as to how long someone's been part of the
community.
The back-dating is done in a separate query that just updates the user's
`created_unix` field. This was the easiest and cleanest way I could
find, as in the initial `INSERT` query the field always is set to "now".
To avoid duplicated load of the same data in an HTTP request, we can set
a context cache to do that. i.e. Some pages may load a user from a
database with the same id in different areas on the same page. But the
code is hidden in two different deep logic. How should we share the
user? As a result of this PR, now if both entry functions accept
`context.Context` as the first parameter and we just need to refactor
`GetUserByID` to reuse the user from the context cache. Then it will not
be loaded twice on an HTTP request.
But of course, sometimes we would like to reload an object from the
database, that's why `RemoveContextData` is also exposed.
The core context cache is here. It defines a new context
```go
type cacheContext struct {
ctx context.Context
data map[any]map[any]any
lock sync.RWMutex
}
var cacheContextKey = struct{}{}
func WithCacheContext(ctx context.Context) context.Context {
return context.WithValue(ctx, cacheContextKey, &cacheContext{
ctx: ctx,
data: make(map[any]map[any]any),
})
}
```
Then you can use the below 4 methods to read/write/del the data within
the same context.
```go
func GetContextData(ctx context.Context, tp, key any) any
func SetContextData(ctx context.Context, tp, key, value any)
func RemoveContextData(ctx context.Context, tp, key any)
func GetWithContextCache[T any](ctx context.Context, cacheGroupKey string, cacheTargetID any, f func() (T, error)) (T, error)
```
Then let's take a look at how `system.GetString` implement it.
```go
func GetSetting(ctx context.Context, key string) (string, error) {
return cache.GetWithContextCache(ctx, contextCacheKey, key, func() (string, error) {
return cache.GetString(genSettingCacheKey(key), func() (string, error) {
res, err := GetSettingNoCache(ctx, key)
if err != nil {
return "", err
}
return res.SettingValue, nil
})
})
}
```
First, it will check if context data include the setting object with the
key. If not, it will query from the global cache which may be memory or
a Redis cache. If not, it will get the object from the database. In the
end, if the object gets from the global cache or database, it will be
set into the context cache.
An object stored in the context cache will only be destroyed after the
context disappeared.
!fixup https://github.com/go-gitea/gitea/pull/22177
The only place this function is used so far is in
findReadmeFileInEntries(), so the only visible effect of this oversight
was in an obscure README-related corner: if the README was in a
subfolder and was a symlink that pointed up, as in .github/README.md ->
../docs/old/setup.md, the README would fail to render when FollowLinks()
hit the nil ptree. This makes the ptree non-nil and thus repairs it.
These functions don't examine contents, just filenames, so they don't
fit in well in a markup module.
This was originally part of
https://github.com/go-gitea/gitea/pull/22177.
Signed-off-by: Nick Guenther <nick.guenther@polymtl.ca>
Add setting to allow edits by maintainers by default, to avoid having to
often ask contributors to enable this.
This also reorganizes the pull request settings UI to improve clarity.
It was unclear which checkbox options were there to control available
merge styles and which merge styles they correspond to.
Now there is a "Merge Styles" label followed by the merge style options
with the same name as in other menus. The remaining checkboxes were
moved to the bottom, ordered rougly by typical order of operations.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fixes#22714
### Changes:
1. Add a token filter which named "camelCase" between custom unicode
token filter and "to_lower" token filter when add custom analyzer.
### Notice:
If users want this feature to work, they should delete folder under
{giteaPath}/data/indexers and restart application. Then application will
create a new IndexMapping.
### Screenshots:
### Others:
I originally attempted to give users the ability to configure the
"token_filters" in the "app.ini" file. But I found that if users does
not strictly follow a right order to register "token_filters", they
won't get the expected results. I think it is difficult to ask users to
do this. So I finally give up this idea.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This code was copy-pasted at some point. Revisit it to reunify it.
~~Doing that then encouraged simplifying the types of a couple of
related functions.~~
~~As a follow-up, move two helper functions, `isReadmeFile()` and
`isReadmeFileExtension()`, intimately tied to `findReadmeFile()`, in as
package-private.~~
Signed-off-by: Nick Guenther <nick.guenther@polymtl.ca>
In Go code, HTMLURL should be only used for external systems, like
API/webhook/mail/notification, etc.
If a URL is used by `Redirect` or rendered in a template, it should be a
relative URL (aka `Link()` in Gitea)
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
I haven't tested `runs_list.tmpl` but I think it could be right.
After this PR, besides the `<meta .. HTMLURL>` in html head, the only
explicit HTMLURL usage is in `pull_merge_instruction.tmpl`, which
doesn't affect users too much and it's difficult to fix at the moment.
There are still many usages of `AppUrl` in the templates (eg: the
package help manual), they are similar problems as the HTMLURL in
pull_merge_instruction, and they might be fixed together in the future.
Diff without space:
https://github.com/go-gitea/gitea/pull/22831/files?diff=unified&w=1
The use of `sort.Search` is wrong: The slice should be sorted, and
`return >= 0` doen't mean it exists, see the
[manual](https://pkg.go.dev/sort#Search).
Could be fixed like this if we really need it:
```diff
diff --git a/modules/charset/escape_stream.go b/modules/charset/escape_stream.go
index 823b63513..fcf1ffbc1 100644
--- a/modules/charset/escape_stream.go
+++ b/modules/charset/escape_stream.go
@@ -20,6 +20,9 @@ import (
var defaultWordRegexp = regexp.MustCompile(`(-?\d*\.\d\w*)|([^\` + "`" + `\~\!\@\#\$\%\^\&\*\(\)\-\=\+\[\{\]\}\\\|\;\:\'\"\,\.\<\>\/\?\s\x00-\x1f]+)`)
func NewEscapeStreamer(locale translation.Locale, next HTMLStreamer, allowed ...rune) HTMLStreamer {
+ sort.Slice(allowed, func(i, j int) bool {
+ return allowed[i] < allowed[j]
+ })
return &escapeStreamer{
escaped: &EscapeStatus{},
PassthroughHTMLStreamer: *NewPassthroughStreamer(next),
@@ -284,14 +287,8 @@ func (e *escapeStreamer) runeTypes(runes ...rune) (types []runeType, confusables
}
func (e *escapeStreamer) isAllowed(r rune) bool {
- if len(e.allowed) == 0 {
- return false
- }
- if len(e.allowed) == 1 {
- return e.allowed[0] == r
- }
-
- return sort.Search(len(e.allowed), func(i int) bool {
+ i := sort.Search(len(e.allowed), func(i int) bool {
return e.allowed[i] >= r
- }) >= 0
+ })
+ return i < len(e.allowed) && e.allowed[i] == r
}
```
But I don't think so, a map is better to do it.
It seems `VisibleType` is only designed for org at first. But it is also
used by user's visibility now.
So I think `org_type.go` can be changed to `visible_type.go`.
Creating a new buffered reader for every part of the blame can miss
lines, as it will read and buffer bytes that the next buffered reader
will not get.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Related to: https://github.com/go-gitea/gitea/issues/18061
This PR adds build info to the Prometheus metrics. This includes:
- goarch: https://pkg.go.dev/runtime#GOARCH
- goos: https://pkg.go.dev/runtime#pkg-constants
- goversion: https://pkg.go.dev/runtime#Version
- gitea version: just exposes the existing
code.gitea.io/gitea/modules/setting.AppVer
It's a similar approach to what some other Golang projects are doing,
e.g. Prometheus:
https://github.com/prometheus/common/blob/main/version/info.go
example /metrics response from Prometheus:
```
# HELP prometheus_build_info A metric with a constant '1' value labeled by version, revision, branch, goversion from which prometheus was built, and the goos and goarch for the build.
# TYPE prometheus_build_info gauge
prometheus_build_info{branch="HEAD",goarch="amd64",goos="linux",goversion="go1.19.4",revision="c0d8a56c69014279464c0e15d8bfb0e153af0dab",version="2.41.0"} 1
```
/metrics response from gitea with this PR:
```
# HELP gitea_build_info Build information
# TYPE gitea_build_info gauge
gitea_build_info{goarch="amd64",goos="linux",goversion="go1.20",version="2c6cc0b8c"} 1
```
Signed-off-by: Michal Wasilewski <mwasilewski@gmx.com>
<!--
Please check the following:
1. Make sure you are targeting the `main` branch, pull requests on
release branches are only allowed for bug fixes.
2. Read contributing guidelines:
https://github.com/go-gitea/gitea/blob/main/CONTRIBUTING.md
3. Describe what your pull request does and which issue you're targeting
(if any)
-->
Signed-off-by: Michal Wasilewski <mwasilewski@gmx.com>
Fixes#19555
Test-Instructions:
https://github.com/go-gitea/gitea/pull/21441#issuecomment-1419438000
This PR implements the mapping of user groups provided by OIDC providers
to orgs teams in Gitea. The main part is a refactoring of the existing
LDAP code to make it usable from different providers.
Refactorings:
- Moved the router auth code from module to service because of import
cycles
- Changed some model methods to take a `Context` parameter
- Moved the mapping code from LDAP to a common location
I've tested it with Keycloak but other providers should work too. The
JSON mapping format is the same as for LDAP.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
partially fix#19345
This PR add some `Link` methods for different objects. The `Link`
methods are not different from `HTMLURL`, they are lack of the absolute
URL. And most of UI `HTMLURL` have been replaced to `Link` so that users
can visit them from a different domain or IP.
This PR also introduces a new javascript configuration
`window.config.reqAppUrl` which is different from `appUrl` which is
still an absolute url but the domain has been replaced to the current
requested domain.
During the refactoring of the git module, I found there were some
strange operations. This PR tries to fix 2 of them
1. The empty argument `--` in repo_attribute.go, which was introduced by
#16773. It seems unnecessary because nothing else would be added later.
2. The complex git service logic in repo/http.go.
* Before: the `hasAccess` only allow `service == "upload-pack" ||
service == "receive-pack"`
* After: unrelated code is removed. No need to call ToTrustedCmdArgs
anymore.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Added a new captcha(cloudflare turnstile) and its corresponding
document. Cloudflare turnstile official instructions are here:
https://developers.cloudflare.com/turnstile
Signed-off-by: ByLCY <bylcy@bylcy.dev>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Every user can already disable the filter manually, so the explicit
setting is absolutely useless and only complicates the logic.
Previously, there was also unexpected behavior when multiple query
parameters were present.
---------
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Most of the time forks are used for contributing code only, so not
having
issues, projects, release and packages is a better default for such
cases.
They can still be enabled in the settings.
A new option `DEFAULT_FORK_REPO_UNITS` is added to configure the default
units on forks.
Also add missing `repo.packages` unit to documentation.
code by: @brechtvl
## ⚠️ BREAKING ⚠️
When forking a repository, the fork will now have issues, projects,
releases, packages and wiki disabled. These can be enabled in the
repository settings afterwards. To change back to the previous default
behavior, configure `DEFAULT_FORK_REPO_UNITS` to be the same value as
`DEFAULT_REPO_UNITS`.
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
This PR follows #21535 (and replace #22592)
## Review without space diff
https://github.com/go-gitea/gitea/pull/22678/files?diff=split&w=1
## Purpose of this PR
1. Make git module command completely safe (risky user inputs won't be
passed as argument option anymore)
2. Avoid low-level mistakes like
https://github.com/go-gitea/gitea/pull/22098#discussion_r1045234918
3. Remove deprecated and dirty `CmdArgCheck` function, hide the `CmdArg`
type
4. Simplify code when using git command
## The main idea of this PR
* Move the `git.CmdArg` to the `internal` package, then no other package
except `git` could use it. Then developers could never do
`AddArguments(git.CmdArg(userInput))` any more.
* Introduce `git.ToTrustedCmdArgs`, it's for user-provided and already
trusted arguments. It's only used in a few cases, for example: use git
arguments from config file, help unit test with some arguments.
* Introduce `AddOptionValues` and `AddOptionFormat`, they make code more
clear and simple:
* Before: `AddArguments("-m").AddDynamicArguments(message)`
* After: `AddOptionValues("-m", message)`
* -
* Before: `AddArguments(git.CmdArg(fmt.Sprintf("--author='%s <%s>'",
sig.Name, sig.Email)))`
* After: `AddOptionFormat("--author='%s <%s>'", sig.Name, sig.Email)`
## FAQ
### Why these changes were not done in #21535 ?
#21535 is mainly a search&replace, it did its best to not change too
much logic.
Making the framework better needs a lot of changes, so this separate PR
is needed as the second step.
### The naming of `AddOptionXxx`
According to git's manual, the `--xxx` part is called `option`.
### How can it guarantee that `internal.CmdArg` won't be not misused?
Go's specification guarantees that. Trying to access other package's
internal package causes compilation error.
And, `golangci-lint` also denies the git/internal package. Only the
`git/command.go` can use it carefully.
### There is still a `ToTrustedCmdArgs`, will it still allow developers
to make mistakes and pass untrusted arguments?
Generally speaking, no. Because when using `ToTrustedCmdArgs`, the code
will be very complex (see the changes for examples). Then developers and
reviewers can know that something might be unreasonable.
### Why there was a `CmdArgCheck` and why it's removed?
At the moment of #21535, to reduce unnecessary changes, `CmdArgCheck`
was introduced as a hacky patch. Now, almost all code could be written
as `cmd := NewCommand(); cmd.AddXxx(...)`, then there is no need for
`CmdArgCheck` anymore.
### Why many codes for `signArg == ""` is deleted?
Because in the old code, `signArg` could never be empty string, it's
either `-S[key-id]` or `--no-gpg-sign`. So the `signArg == ""` is just
dead code.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Our trace logging is far from perfect and is difficult to follow.
This PR:
* Add trace logging for process manager add and remove.
* Fixes an errant read file for git refs in getMergeCommit
* Brings in the pullrequest `String` and `ColorFormat` methods
introduced in #22568
* Adds a lot more logging in to testPR etc.
Ref #22578
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
caused by #22680
`pushPayload.Ref` and `prPayload.PullRequest.Base.Ref` have the format
like `refs/heads/<branch_name>`, so we need to trim the prefix before
comparing.
The `no-store` cache control added in #20432 is causing form input to be
cleared unnecessarily on page reload. Instead use
`max-age=0,private,must-revalidate` which avoids this.
This was particularly a problem when typing a long comment for an issue
and then for example changing the label. The page would be reloaded and
lose the unsubmitted comment.
Fixes#22603
This PR fixes two bugs with Webauthn support:
* There was a longstanding bug within webauthn due to the backend using
URLEncodedBase64 but the javascript using decoding using plain base64.
This causes intermittent issues with users reporting decoding errors.
* Following the recent upgrade to webauthn there was a change in the way
the library expects RPOrigins to be configured. This leads to the
Relying Party Origin not being configured and prevents registration.
Fix#22507
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
#21937 implemented only basic events based on name because of `act`'s
limitation. So I sent a PR to parse all possible events details in
https://gitea.com/gitea/act/pulls/11 and it merged. The ref
documentation is
https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows
This PR depends on that and make more detail responses for `push` events
and `pull_request` events. And it lefts more events there for future
PRs.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fixes#22628
This PR adds cross references for commits by using the format
`owner/repo@commit` . References are rendered like
[go-gitea/lgtm@6fe88302](#dummy).
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR just consumes the
[hcaptcha](https://gitea.com/jolheiser/hcaptcha) and
[haveibeenpwned](https://gitea.com/jolheiser/pwn) modules directly into
Gitea.
Also let this serve as a notice that I'm fine with transferring my
license (which was already MIT) from my own name to "The Gitea Authors".
Signed-off-by: jolheiser <john.olheiser@gmail.com>
The code for checking if a commit has caused a change in a PR is
extremely inefficient and affects the head repository instead of using a
temporary repository.
This PR therefore makes several significant improvements:
* A temporary repo like that used in merging.
* The diff code is then significant improved to use a three-way diff
instead of comparing diffs (possibly binary) line-by-line - in memory...
Ref #22578
Signed-off-by: Andrew Thornton <art27@cantab.net>
Adding the related comment to the issue and pull request status change
in the UI notifications allows to navigate directly to the specific
event in its dedicated view, easing the reading of last comments and to
the editor for additional comments if desired.
This adds a yaml attribute that will allow the option for when markdown
is rendered that the title will be not included in the output
Based on work from @brechtvl
The `commit_id` property name is the same as equivalent functionality in
GitHub. If the action was not caused by a commit, an empty string is
used.
This can for example be used to automatically add a Resolved label to an
issue fixed by a commit, or clear it when the issue is reopened.
This commit adds support for specifying comment types when importing
with `gitea restore-repo`. It makes it possible to import issue changes,
such as "title changed" or "assigned user changed".
An earlier version of this pull request was made by Matti Ranta, in
https://future.projects.blender.org/blender-migration/gitea-bf/pulls/3
There are two changes with regard to Matti's original code:
1. The comment type was an `int64` in Matti's code, and is now using a
string. This makes it possible to use `comment_type: title`, which is
more reliable and future-proof than an index into an internal list in
the Gitea Go code.
2. Matti's code also had support for including labels, but in a way that
would require knowing the database ID of the labels before the import
even starts, which is impossible. This can be solved by using label
names instead of IDs; for simplicity I I left that out of this PR.
This PR adds a task to the cron service to allow garbage collection of
LFS meta objects. As repositories may have a large number of
LFSMetaObjects, an updated column is added to this table and it is used
to perform a generational GC to attempt to reduce the amount of work.
(There may need to be a bit more work here but this is probably enough
for the moment.)
Fix#7045
Signed-off-by: Andrew Thornton <art27@cantab.net>
As suggest by Go developers, use `filepath.WalkDir` instead of
`filepath.Walk` because [*Walk is less efficient than WalkDir,
introduced in Go 1.16, which avoids calling `os.Lstat` on every file or
directory visited](https://pkg.go.dev/path/filepath#Walk).
This proposition address that, in a similar way as
https://github.com/go-gitea/gitea/pull/22392 did.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR introduce glob match for protected branch name. The separator is
`/` and you can use `*` matching non-separator chars and use `**` across
separator.
It also supports input an exist or non-exist branch name as matching
condition and branch name condition has high priority than glob rule.
Should fix#2529 and #15705
screenshots
<img width="1160" alt="image"
src="https://user-images.githubusercontent.com/81045/205651179-ebb5492a-4ade-4bb4-a13c-965e8c927063.png">
Co-authored-by: zeripath <art27@cantab.net>
closes#13585fixes#9067fixes#2386
ref #6226
ref #6219fixes#745
This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.
Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed
A possible signature and/or reply gets stripped from the content.
I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When using an external renderer, STDOUT is expected to be HTML. But
anything written to STDERR is currently ignored. In cases where the
renderer fails, I would like to log any error messages that the external
program outputs to STDERR.
Fix#22386
`GetDirectorySize` moved as `getDirectorySize` because it becomes a
special function which should not be put in `util`.
Co-authored-by: Jason Song <i@wolfogre.com>
- Move the file `compare.go` and `slice.go` to `slice.go`.
- Fix `ExistsInSlice`, it's buggy
- It uses `sort.Search`, so it assumes that the input slice is sorted.
- It passes `func(i int) bool { return slice[i] == target })` to
`sort.Search`, that's incorrect, check the doc of `sort.Search`.
- Conbine `IsInt64InSlice(int64, []int64)` and `ExistsInSlice(string,
[]string)` to `SliceContains[T]([]T, T)`.
- Conbine `IsSliceInt64Eq([]int64, []int64)` and `IsEqualSlice([]string,
[]string)` to `SliceSortedEqual[T]([]T, T)`.
- Add `SliceEqual[T]([]T, T)` as a distinction from
`SliceSortedEqual[T]([]T, T)`.
- Redesign `RemoveIDFromList([]int64, int64) ([]int64, bool)` to
`SliceRemoveAll[T]([]T, T) []T`.
- Add `SliceContainsFunc[T]([]T, func(T) bool)` and
`SliceRemoveAllFunc[T]([]T, func(T) bool)` for general use.
- Add comments to explain why not `golang.org/x/exp/slices`.
- Add unit tests.
After #22362, we can feel free to use transactions without
`db.DefaultContext`.
And there are still lots of models using `db.DefaultContext`, I think we
should refactor them carefully and one by one.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Gitea emoji dataset was out of date because it gets manually built and
hasn't been rebuilt since it was added. This means Gitea doesn't
recognize some newer emoji or changes to existing ones.
After changing the max unicode version to 14 I just ran: `go run
build/generate-emoji.go`
This should address the initial issue seen in #22153 where Gitea doesn't
recognize a standard alias used elsewhere when importing content.
14 is the latest supported version from the upstream source as 15 is not
widely supported (in their opinion) yet
A drawback is the previous generated template has been cached, so you
cannot get error in the UI but only from log
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: delvh <dev.lh@web.de>
- Unify the hashing code for repository and user avatars into a
function.
- Use a sane hash function instead of MD5.
- Only require hashing once instead of twice(w.r.t. hashing for user
avatar).
- Improve the comment for the hashing code of why it works.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Fix#22281
In #21621 , `Get[V]` and `Set[V]` has been introduced, so that cache
value will be `*Setting`. For memory cache it's OK. But for redis cache,
it can only store `string` for the current implementation. This PR
revert some of changes of that and just store or return a `string` for
system setting.
Previously, there was an `import services/webhooks` inside
`modules/notification/webhook`.
This import was removed (after fighting against many import cycles).
Additionally, `modules/notification/webhook` was moved to
`modules/webhook`,
and a few structs/constants were extracted from `models/webhooks` to
`modules/webhook`.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
#18058 made a mistake. The disableGravatar's default value depends on
`OfflineMode`. If it's `true`, then `disableGravatar` is true, otherwise
it's `false`. But not opposite.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Push mirrors `sync_on_commit` option was added to the web interface in
v1.18.0. However, it's not added to the API. This PR updates the API
endpoint.
Fixes#22267
Also, I think this should be backported to 1.18
There are a few places in FlushQueueWithContext which make an incorrect
assumption about how `select` on multiple channels works.
The problem is best expressed by looking at the following example:
```go
package main
import "fmt"
func main() {
closedChan := make(chan struct{})
close(closedChan)
toClose := make(chan struct{})
count := 0
for {
select {
case <-closedChan:
count++
fmt.Println(count)
if count == 2 {
close(toClose)
}
case <-toClose:
return
}
}
}
```
This PR double-checks that the contexts are closed outside of checking
if there is data in the dataChan. It also rationalises the WorkerPool
FlushWithContext because the previous implementation failed to handle
pausing correctly. This will probably fix the underlying problem in
#22145Fix#22145
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR changed the Auth interface signature from
`Verify(http *http.Request, w http.ResponseWriter, store DataStore, sess
SessionStore) *user_model.User`
to
`Verify(http *http.Request, w http.ResponseWriter, store DataStore, sess
SessionStore) (*user_model.User, error)`.
There is a new return argument `error` which means the verification
condition matched but verify process failed, we should stop the auth
process.
Before this PR, when return a `nil` user, we don't know the reason why
it returned `nil`. If the match condition is not satisfied or it
verified failure? For these two different results, we should have
different handler. If the match condition is not satisfied, we should
try next auth method and if there is no more auth method, it's an
anonymous user. If the condition matched but verify failed, the auth
process should be stop and return immediately.
This will fix#20563
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Jason Song <i@wolfogre.com>
If user has reached the maximum limit of repositories:
- Before
- disallow create
- allow fork without limit
- This patch:
- disallow create
- disallow fork
- Add option `ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT` (Default **true**) :
enable this allow user fork repositories without maximum number limit
fixed https://github.com/go-gitea/gitea/issues/21847
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Since #20218 introduced internal watching template, template watching
should be removed from `air`. This will prevent restart the whole server
once the template files changed to speed up developing when using `make
watch`.
To ensure `make watch` will reuse template watching, this PR introduced
a new ENV `GITEA_RUN_MODE` to make sure `make watch` will always run in
a dev mode of Gitea so that template watching will open.
This PR also added more exclude testdata directories.
- Remove code that isn't being used.
Found this is my stash from a few weeks ago, not sure how I found this
in the first place.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fixes#22178
After this change upload versions with different semver metadata are
treated as the same version and trigger a duplicated version error.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
For a long time Gitea has tested PR patches using a git apply --check
method, and in fact prior to the introduction of a read-tree assisted
three-way merge in #18004, this was the only way of checking patches.
Since #18004, the git apply --check method has been a fallback method,
only used when the read-tree three-way merge method has detected a
conflict. The read-tree assisted three-way merge method is much faster
and less resource intensive method of detecting conflicts. #18004 kept
the git apply method around because it was thought possible that this
fallback might be able to rectify conflicts that the read-tree three-way
merge detected. I am not certain if this could ever be the case.
Given the uncertainty here and the now relative stability of the
read-tree method - this PR makes using this fallback optional and
disables it by default. The hope is that users will not notice any
significant difference in conflict detection and we will be able to
remove the git apply fallback in future, and/or improve the read-tree
three-way merge method to catch any conflicts that git apply method
might have been able to fix.
An additional benefit is that patch checking should be significantly
less resource intensive and much quicker.
(See
https://github.com/go-gitea/gitea/issues/22083\#issuecomment-1347961737)
Ref #22083
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
The PR #21198 introduced a probable security vulnerability which
resulted in making all storage files be marked as executable.
This PR ensures that these are forcibly marked as non-executable.
Fix#22161
Signed-off-by: Andrew Thornton <art27@cantab.net>
As recognised in #21841 the rendering of plain text files is somewhat
incorrect when there are ambiguous characters as the html code is double
escaped. In fact there are several more problems here.
We have a residual isRenderedHTML which is actually simply escaping the
file - not rendering it. This is badly named and gives the wrong
impression.
There is also unusual behaviour whether the file is called a Readme or
not and there is no way to get to the source code if the file is called
README.
In reality what should happen is different depending on whether the file
is being rendered a README at the bottom of the directory view or not.
1. If it is rendered as a README on a directory - it should simply be
escaped and rendered as `<pre>` text.
2. If it is rendered as a file then it should be rendered as source
code.
This PR therefore does:
1. Rename IsRenderedHTML to IsPlainText
2. Readme files rendered at the bottom of the directory are rendered
without line numbers
3. Otherwise plain text files are rendered as source code.
Replace #21841
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The recent PR adding orphaned checks to the LFS storage is not
sufficient to completely GC LFS, as it is possible for LFSMetaObjects to
remain associated with repos but still need to be garbage collected.
Imagine a situation where a branch is uploaded containing LFS files but
that branch is later completely deleted. The LFSMetaObjects will remain
associated with the Repository but the Repository will no longer contain
any pointers to the object.
This PR adds a second doctor command to perform a full GC.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Gitea will attempt to lookup its location using LookPath however, this
fails on cmd.exe if gitea is in the current working directory.
exec.LookPath will return an exec.ErrDot error which we can test for and
then simply using filepath.Abs(os.Args[0]) to absolute gitea against the
current working directory.
Fix#22063
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Close#14601Fix#3690
Revive of #14601.
Updated to current code, cleanup and added more read/write checks.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andre Bruch <ab@andrebruch.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <git@nroo.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Gitea will migrate the database model version automatically, but it
should be able to be disabled and keep Gitea shutdown if the version is
not matched.
Although there are per-locale fallbacks for ambiguity the locale names
for Chinese do not quite match our locales. This PR simply maps zh-CN on
to zh-hans and other zh variants on to zh-hant.
Ref #20999
Signed-off-by: Andrew Thornton <art27@cantab.net>
When getting tracked times out of the db and loading their attributes
handle not exist errors in a nicer way. (Also prevent an NPE.)
Fix#22006
Signed-off-by: Andrew Thornton <art27@cantab.net>
