Backport #20869
Some Migration Downloaders provide re-writing of CloneURLs that may point to
unallowed urls. Recheck after the CloneURL is rewritten.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
The graceful manager waits for 4 listeners to be created or to be told that they are not needed. If it is not told about them it will indefinitely and timeout.
This leads to SVC hosts not being told of being in the readyState but on Unix would lead to the termination of the process.
There was an unfortunate regression in #20299 which missed this subtly and in the case whereby SSH is disabled the `builtinUnused()` is not called.
This PR adds a call to `builtinUnused()` when not using the builtin ssh to allow `createServerWaitGroup.Done()` to be called.
In addition it was noted that the if/else clauses for timeout informing of the SVC host were in the wrong order. These have been swapped.
Fix#20609
* Rework repo buttons (#20602)
* Rework repo buttons
- Replace "New PR" and "Go to File" button with Icon Button
- Move all "Add File" actions into a dropdown button
- Remove most custom styling of clone buttons
- Margin and wiki tweaks
Buttons are now all equal height, mobile layout wraps gracefully.
Fixes: https://github.com/go-gitea/gitea/issues/13671
Replaces: https://github.com/go-gitea/gitea/pull/20375
* Restore history button and hide add button when unable to add (#20718)
Fix two regressions from #20602:
- Restore the 'History' button that was previously unable to render
because it's show condition was never hit
- Hide the 'Add File' button when there would be no items in the
dropdown.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #20621
Some repositories do not have the PullRequest unit present in their configuration
and unfortunately the way that IsUserAllowedToUpdate currently works assumes
that this is an error instead of just returning false.
This PR simply swallows this error allowing the function to return false.
Fix#20621
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
In MirrorRepositoryList.loadAttributes there is some code to load the Mirror entries
from the database. This assumes that every Repository which has IsMirror set has
a Mirror associated in the DB. This association is incorrect in the case of
Mirror repository under creation when there is no Mirror entry in the DB until
completion.
Unfortunately LoadAttributes makes this incorrect assumption and presumes that a
Mirror will always be loaded. This then causes a panic.
This PR simply double checks if there a Mirror before attempting to link back to
its Repo. Unfortunately it should be expected that there may be other cases where
this incorrect assumption causes further problems.
Fix#20804
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Backport #20637
Windows doesn't have the concept of "executable" POSIX bits so for now always return true to minimise doctor and logging noise. Addresses #20636
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: JonRB <4564448+eeyrjmr@users.noreply.github.com>
Co-authored-by: silverwind <me@silverwind.io>
Backport #20785
This fixes a problem where the "All" line item on the Issues or Pull Requests page was only showing the count of the selected repos instead of the total of all issues/prs in all repos.
The "total number of shown issues" number is now stashed in a different context variable in case it wants to be used by the frontend later. It's currently not being used.
Fixes#20574
- Backport #20781
- Since b9e8fa5 the avatar will be inlined into the comment header, so there's more room for the actual comment container(thus more text per line in the comment body). However this didn't take into consideration that the flex didn't allow any wrapping and thus was shrinking the avatar. Well this isn't a perfect solution, as you ideally all want these elements to be individually wrapped(such that comment-header-right can be on the same line as comment-header-left, which now causes a new line in certain situations). It's a better solution than the current CSS and to not mess with the desktop CSS/HTML.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- Backport #20726
- Currently the branch icon is "squashed" between the two branch names and feels a bit "amateur-ish" to my feeling(relative to other UI elements).
- This patch tries to improve that by making the icon bigger and by adding some margin to not have a "squashed" icon.
- This patch also includes a "fix", for some reason this symbol is not centering correctly. So apply allign-items: center to the top div
* Add disable download source configuration (#20548)
Add configuration to enable/disable download source from UI.
Co-authored-by: zeripath <art27@cantab.net>
* Fix BaseVars not used in renderering
* Fix disabled open in vscode menu when disabling download source from UI
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Generating repositories from a template is done inside a transaction.
Manual rollback on error is not needed and it always results in error
"repository does not exist".
Co-authored-by: Gabriel Vasile <gabriel.vasile@email.com>
Previously, if a invalid form was submitted (for example issue with no
title), the form could not be re-submitted again because the button
would not stay stuck in loading state. Fix that by hooking the 'submit'
event instead which triggers only when the form is valid.
This enables git.Command's Run to optionally use the given context directly so its deadline will be respected. Otherwise, it falls back to the previous behavior of using the supplied timeout or a default timeout value of 360 seconds.
repo's serviceRPC() calls now use the context's deadline (which is unset/unlimited) instead of the default 6-minute timeout. This means that large repo clones will no longer arbitrarily time out on the upload-pack step, and pushes can take longer than 6 minutes on the receive-pack step.
Fixes#20680
* Add username check to doctor
- Add a new breaking change detector to Gitea's doctor, which checks if
all users still have a valid username according to Gitea. Given from
time-to-time we need to make changes, either due to new routes or due to
security, it's for a instance's admin to check if all users still have a
valid username.
* Fix extra argument
* Apply suggestions from code review
* Apply suggestions from code review
Keep the same behavior as 1.16
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Tyrone Yeh <tyrone_yeh@draytek.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
The code for detection of lines in highlight.go is somewhat too complex
and doesn't take account of how Chroma is actually splitting things into
lines for us.
Remove both the .line and .cl classes from Chroma's HTML which made
the old conditional work again. This fixed Copy of YAML files while also
reducing the amount of rendered HTML nodes.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
- Backport of #20616
- Git only decides to use the Wire 2 protocol when `git {receive,upload}-pack` receive the `GIT_PROTOCOL` environment with as value `version=2`. Currently the internal SSH Server wasn't passing this environment through. The `gitea serv` code already passed all received environments to the git command, so no code changes there.
- This is mentioned in Git manual, https://git-scm.com/docs/git#Documentation/git.txt-codeGITPROTOCOLcode
* Clean up and fix clone button script (#20415)
The button 'primary' class needs to be set in a synchronous script to prevent flicker of the button which was regressed recently, fixed that.
Additionally, reduced the two script tags to just one, the previous scripts were actually initializing the buttons thrice on the empty repo page, now it only initializes once. Finally, removed duplicate code and re-used the inline function in the update code as well.
I had to split out the script into a separate template as on the empty repo page, the script needs access to the clone URL span in the example text, which is rendered below the clone buttons, so buttons and script could not be combined.
* Add default value for clone URLs
Default clone URLs to HTTP(S) in DOM rendering. JS will immediately
replace this if the user preference is SSH.
Fixes: https://github.com/go-gitea/gitea/issues/20558
WebAuthn have updated their specification to set the maximum size of the
CredentialID to 1023 bytes. This is somewhat larger than our current
size and therefore we need to migrate.
The PR changes the struct to add CredentialIDBytes and migrates the CredentialID string
to the bytes field before another migration drops the old CredentialID field. Another migration
renames this field back.
Fix#20457
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
- Always respect the user's configured mime type map
- Allow more types like image/pdf/video/audio to serve with correct content-type
- Shorten cache duration of raw files to 5 minutes, matching GitHub
- Don't set `content-disposition: attachment`, let the browser decide whether it wants to download or display a file directly
- Implement rfc5987 for filenames, remove previous hack. Confirmed it working in Safari.
- Make PDF attachment work in Safari by removing `sandbox` attribute.
This change will make a lot more file types open directly in browser now. Logic should generally be more readable than before with less `if` nesting and such.
Replaces: https://github.com/go-gitea/gitea/pull/20460
Replaces: https://github.com/go-gitea/gitea/pull/20455
Fixes: https://github.com/go-gitea/gitea/issues/20404
- Since #20108 we have two version of the notification bell, one for
mobile the other for non-mobile. However the code only accounts for one
notification count and thus was only updating the non-mobile one.
- This code fixes that by applying the code for all `.notification_count`s.
- Frontport will be in #20543
There is a subtle bug in the code relating to collating the results of
`git ls-files -u -z` in `unmergedFiles()`. The code here makes the
mistake of assuming that every unmerged file will always have a stage 1
conflict, and this results in conflicts that occur in stage 3 only being
dropped.
This PR simply adjusts this code to ensure that any empty unmergedFile
will always be passed down the channel.
The PR also adds a lot of Trace commands to attempt to help find future
bugs in this code.
Fix#19527
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
